SuperATV 1.5" Forward Offset A Arms Instruction Manual

1. Wprowadzenie

This manual provides essential information for the installation, operation, and maintenance of your SuperATV 1.5" Forward Offset A Arms. Please read these instructions thoroughly before proceeding with installation to ensure proper function and safety.

1.1 Produkt powyżejview

The SuperATV 1.5" Forward Offset A Arms are designed to enhance tire clearance and vehicle stability. They provide an additional 1.5 inches of forward offset, allowing for larger tire fitment and an extended wheelbase.

Figure 1: SuperATV 1.5" Forward Offset A Arms installed on a Honda Pioneer.

1.2 Vehicle Fitment

These A Arms are compatible with the following Honda Pioneer models:

• Honda Pioneer 1000: 2016-2021
• Honda Pioneer 1000-5: 2016-2021
• Honda Pioneer 1000 Deluxe: 2016-2021
• Honda Pioneer 1000-5 Deluxe: 2016-2021
• Honda Pioneer 1000 Limited Edition: 2017-2021
• Honda Pioneer 1000-5 Limited Edition: 2017-2021

Important Fitment Notes:

• Pioneer 1000 or Pioneer 1000-5 Limited Edition Models require Rhino 2.0 axles.
• Wheel spacers may be necessary when using 12" wheels.
• If installing with a 3" Lift Kit, Rhino Brand Axles are mandatory. Stock axles will bind.
• Does NOT fit Trail models if used with a lift kit.

2. Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy w opakowaniu znajdują się wszystkie wymienione poniżej elementy.

• Upper A-arm (Passenger Side)
• Upper A-arm (Driver Side)
• Lower A-arm (Passenger Side)
• Lower A-arm (Driver Side)
• Zestaw do zatrzymania kierownicy
• UHMW Bushings with Sleeves (Preinstalled)
• Adjustable Pivot Blocks

Figure 2: Complete set of SuperATV 1.5" Forward Offset A Arms components.

3. Uwagi dotyczące instalacji

The A-arms feature 1.25" tubing, which is 25% stronger than standard stock components. The 1.5" forward offset provides increased tire clearance, accommodating tires up to 28" in diameter, and contributes to a longer wheelbase for improved stability.

Figure 3: Close-up of an installed A-arm, highlighting the robust construction.

3.1 Camber Adjustability

The included adjustable pivot blocks allow for precise alignment adjustments. This feature enables you to maintain optimal camber settings as needed, which is crucial for tire wear and handling performance.

3.2 Ball Joints and Tie Rod Ends

This product does not include ball joints. Ball joints and tie rod ends are considered wear and tear items and are not covered under the lifetime warranty.

4. Specyfikacje

5. Konserwacja

Regular inspection of your A-arms and associated suspension components is recommended to ensure continued safe operation and longevity. Check for:

• Loose fasteners: Ensure all bolts and nuts are tightened to manufacturer specifications.
• Wear on bushings: Inspect UHMW bushings for signs of wear or damage. Replace as necessary.
• Damage to A-arms: Check for bends, cracks, or other structural damage.
• Alignment: Periodically check and adjust camber using the adjustable pivot blocks to prevent uneven tire wear.

6. Rozwiązywanie Problemów

Jeżeli po instalacji wystąpią problemy, należy wziąć pod uwagę następujące kwestie:

• Binding Axles: If axles are binding, verify that the correct Rhino 2.0 axles are installed, especially on Limited Edition models or when using a 3" lift kit. Stock axles will bind under these conditions.
• Tire Rubbing: Ensure that wheel spacers are used if running 12" wheels, as recommended. Verify tire size does not exceed 28".
• Uneven Tire Wear/Poor Handling: Adjust camber using the adjustable pivot blocks. Professional alignment may be required.
• Luźne elementy: Re-check all fasteners for proper torque.

For persistent issues, contact SuperATV customer support.

7. Informacje o gwarancji

SuperATV provides a lifetime warranty for these High Clearance A Arms to the original purchaser. This warranty covers manufacturing defects and material failures under normal use.

Wykluczenia:

• Ball joints and tie rod ends are considered wear and tear items and are not covered by the lifetime warranty.
• Damage resulting from improper installation, misuse, abuse, or modification of the product.

For warranty claims, please retain your proof of purchase and contact SuperATV directly.

8. Wsparcie i kontakt

For technical assistance, installation questions, or warranty inquiries, please contact SuperATV customer support. Refer to the official SuperATV webna tej stronie znajdziesz najbardziej aktualne dane kontaktowe.

Producent: SuperATV.pl

Webstrona: www.superatv.com