KWANWA KW715S 2-in-1 Alarm Clock and Indoor Thermometer Instruction Manual

1. Koniec produktuview

The KWANWA KW715S is a versatile 2-in-1 device functioning as both a digital alarm clock and an indoor thermometer. Designed for portability and ease of use, it features a clear digital display, adjustable brightness, and long-lasting battery operation. Simply flip the device to switch between time and temperature display modes.

2. Konfiguracja

2.1 Instalacja baterii

The KWANWA KW715S operates on 2 baterie alkaliczne AA (not included). Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

2.2 Ustawienie czasu początkowego

1. Naciśnij i przytrzymaj USTAWIENIE CZASU button (located on the back) for 2 seconds until the hour digits begin to flash.
2. Użyj GODZINA I MIN przyciski, aby ustawić czas.
3. Naciskać USTAWIENIE CZASU ponownie, aby potwierdzić i wyjść z trybu ustawiania czasu.

2.3 Wybór jednostki temperatury (°C/°F)

The device allows you to switch between Celsius (°C) and Fahrenheit (°F) display modes. This can be done by flipping the clock over to display temperature, then using the dedicated °C/°F button if available, or by following specific instructions in the operating section.

3. Instrukcja obsługi

3.1 Ustawianie alarmu

1. Naciśnij i przytrzymaj Zestaw AL button (on the back) for 2 seconds until the alarm hour digits flash.
2. Użyj GODZINA I MIN przyciski umożliwiające ustawienie żądanej godziny alarmu.
3. Naciskać Zestaw AL again to confirm and exit alarm setting mode.

3.2 Włączanie/wyłączanie alarmu

Użyj WŁ./WYŁ. AL switch (on the back) to activate or deactivate the alarm. When the alarm is active, an alarm icon will appear on the display.

3.3 Funkcja drzemki

When the alarm sounds, gently touch the large DRZEMKA button on the top of the clock. This will temporarily silence the alarm for 7 minutes. The snooze function can be repeated up to 3 times.

3.4 Regulowana jasność

Naciśnij USTAWIENIE CZASU button for 2 seconds to cycle through 3 levels of brightness: low, middle, and high. The clock also features an automatic night mode, which dims the display between 8:00 PM and 6:00 AM to create a peaceful sleeping environment.

3.5 Switching Between Time and Temperature

To switch between displaying the time and the indoor temperature, simply flip the alarm clock upside down. The display will automatically change to show the current indoor temperature.

3.6 12-Hour / 24-Hour Mode

The clock supports both 12-hour and 24-hour time formats. Refer to the buttons on the back for the specific button to toggle between these modes (e.g., a dedicated 12/24 godz przycisk).

4. Konserwacja

4.1 Wymiana baterii

The device features a low battery indicator. When this indicator appears, it is time to replace the 2x AA alkaline batteries to ensure continuous operation and accurate readings. The improved design allows batteries to last over 1 year.

4.2 Czyszczenie

To clean the clock, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.

5. Rozwiązywanie Problemów

• Miganie wyświetlacza: If you observe flickering in videos of the product, please note that this is often an artifact of video recording and not indicative of actual product performance. The display is stable in real-life use.
• Alarm nie brzmi: Zapewnij WŁ./WYŁ. AL switch is in the 'ON' position. Verify that the alarm time is correctly set. Check the battery level and replace batteries if the low battery indicator is active.
• Incorrect Time/Temperature: Re-set the time following the instructions in Section 2.2. For temperature, ensure the device is placed in a stable indoor environment away from direct heat sources or drafts for accurate readings.
• Wskaźnik niskiego poziomu baterii: This icon signals that the batteries are running low and should be replaced soon.

6. Specyfikacje

7. Gwarancja i wsparcie

For warranty information or product support, please contact KWANWA customer service at: wsparcie@odokeeshop.com.