Riello Gulliver BGK1 Low NOx Oil Burner

Produkt ponadview

Image: The Riello Gulliver BGK1 Low NOx Oil Burner, featuring a red casing and a metallic combustion head, designed for efficient heating systems.

The Riello Gulliver BGK1 is a single-stage monobloc oil burner designed for EL fuel oil, offering a power output range of 17.8 to 35.6 kW. This burner is engineered for high efficiency and reduced pollutant emissions, particularly low NOx.

Główne cechy obejmują:

• Blower with forward-curved blades.
• High-quality ABS plastic cover with oil-resistant soundproofing.
• Self-closing air damper with external adjustment.
• Silnik elektryczny jednofazowy, 230 V, 50 Hz.
• Anti-dust disc for flame stability.
• Gear pump for fuel supply, with filter, pressure regulator, and manometer/vacuum meter connections.
• Internal bypass for single-flange installations.
• Integrated solenoid valve in the pump for fuel supply.
• Flame monitoring sensor with optical fiber.
• Microprocessor control unit with advanced diagnostic functions and integrated ignition transformer.
• Radio interference protection filter.
• PTC oil preheater with thermostatic control.
• Protection rating IP X0D (IP 40).

Instalacja i konfiguracja

Proper installation is crucial for the safe and efficient operation of your Riello Gulliver BGK1 oil burner. It is recommended that installation be performed by a qualified technician.

Zawartość opakowania:

• Riello Low-NOx BGK1 Oil Burner (17.8 to 35.6 kW)
• 2 oil hoses and 2 fittings for oil supply connection
• Flange, burner flange gasket, screws, and nuts for fastening
• 7-pin connector (level 1) integrated into the control unit (counter-plug not included)
• Instrukcje instalacji, użytkowania i konserwacji
• Lista części zamiennych
• Accessories for remote unlocking (not for BGK0.1)

Wytyczne dotyczące instalacji:

1. Zgodność kotła: Ensure the maximum door thickness is respected concerning recirculation openings. If necessary, the boiler's door insulation may need to be cut, subject to the boiler manufacturer's authorization.
2. Combustion Chamber Load: The maximum combustion chamber load must be 1200 kW/m³ to achieve high pollutant reduction.
3. Wymiary paleniska: Hearth dimensions must at least conform to the test flame tube according to EN 267 standard.
4. Podłączenie paliwa: Connect the provided oil hoses and fittings to the oil supply system. Ensure all connections are secure and leak-free.
5. Montowanie: Securely fasten the burner to the boiler using the provided flange, gasket, screws, and nuts.
6. Podłączenie elektryczne: Connect the 7-pin connector to the control unit. Ensure proper electrical wiring according to local regulations and the provided wiring diagram in the detailed manual.

Instrukcja obsługi

The Riello Gulliver BGK1 burner is designed for automated operation. Once properly installed and configured, it will operate based on the boiler's demand.

Procedura uruchomienia:

1. Włączanie: Ensure the main power supply to the burner and boiler is switched on.
2. Zapas paliwa: Verify that the oil supply valve is open and there is sufficient fuel in the tank.
3. Jednostka sterująca: The microprocessor control unit will initiate the start-up sequence, including pre-purge, ignition, and flame establishment.
4. Monitorowanie płomienia: The optical fiber flame monitoring sensor continuously checks for flame presence. If no flame is detected or if it extinguishes, the burner will enter a lockout state for safety.

Normalna praca:

• The burner will cycle on and off as required by the thermostat or boiler control system to maintain the desired temperature.
• The self-closing air damper adjusts automatically to optimize combustion.
• The PTC oil preheater ensures the fuel is at the optimal temperature for efficient atomization and combustion.

Zdalne odblokowanie:

The BGK1 model supports remote unlocking. Refer to the detailed installation manual for instructions on connecting and utilizing remote unlocking accessories.

Konserwacja

Regular maintenance ensures the longevity and optimal performance of your Riello Gulliver BGK1 burner. All maintenance procedures should be carried out by qualified personnel.

Zalecany harmonogram konserwacji:

• Rocznie:
• Inspect and clean the combustion head and nozzle.
• Check and clean the flame monitoring sensor (optical fiber).
• Inspect and clean the fan and air intake.
• Check the fuel pump pressure and filter.
• Verify electrical connections and wiring integrity.
• Perform a combustion analysis to ensure optimal efficiency and low emissions.
• Okresowo (w razie potrzeby):
• Wyczyść zewnętrzną część palnika.
• Sprawdź, czy nie występują nietypowe dźwięki lub wibracje.

Refer to the detailed maintenance instructions provided with the burner for specific procedures and recommended spare parts.

Rozwiązywanie problemów

The microprocessor control unit of the Riello Gulliver BGK1 features advanced diagnostic functions to assist in identifying operational issues. In case of a lockout or malfunction, the control unit may display a fault code.

Typowe problemy i rozwiązania:

For persistent issues or complex diagnostics, consult a qualified heating technician. Do not attempt repairs beyond your technical expertise.

Dane techniczne

Gwarancja i wsparcie

Information regarding the specific warranty terms for the Riello Gulliver BGK1 Low NOx Oil Burner is not provided within this manual. Please refer to your purchase documentation or contact your supplier for warranty details.

For technical support, spare parts, or professional servicing, please contact an authorized Riello service center or your product distributor. Always ensure that any work on the burner is performed by certified professionals.