COMPUTHERM Q7RF Programmable Wireless Room Thermostat User Manual

1. Wprowadzenie

The COMPUTHERM Q7RF wireless room thermostat is designed for precise control of heating and air conditioning systems. This programmable device allows you to set individual temperature schedules for each day of the week, optimizing comfort and energy efficiency in your home or office. Its wireless design offers flexible placement of the thermostat unit, while the receiver unit connects directly to your boiler or air conditioning system, compatible with both 24V and 230V control circuits.

2. Zawartość opakowania

Sprawdź, czy w pakiecie znajdują się wszystkie komponenty:

• 4 x COMPUTHERM Q7RF Room Thermostat (Transmitter Unit)
• 4 x COMPUTHERM Q7RF Receiver Unit
• Instrukcja obsługi (ten dokument)
• Śruby montażowe i kołki rozporowe

3. Koniec produktuview

The COMPUTHERM Q7RF system consists of two main components: the thermostat unit (transmitter) and the receiver unit. The thermostat unit measures the room temperature and allows you to set desired temperatures and programs. The receiver unit connects to your heating or cooling system and switches it on or off based on signals from the thermostat unit.

Rysunek 1: Koniecview of the COMPUTHERM Q7RF 4-piece set, showing multiple thermostat and receiver units.

Figure 2: A single COMPUTHERM Q7RF thermostat unit communicating wirelessly with its receiver unit.

3.1 Thermostat Unit (Transmitter)

• Wyświetlacz LCD: Shows current temperature, set temperature, time, day, and program status.
• Przyciski sterujące: For setting temperature, time, and programming schedules.
• Komora baterii: Do zasilania.

3.2 Odbiornik

• Zaciski okablowania: For connection to the heating/cooling system.
• Wskaźniki stanu: LEDs to show power and relay status.
• Manual Override Buttons: For temporary manual control.

4. Specyfikacje

5. Konfiguracja i instalacja

5.1 Thermostat Unit Placement and Battery Installation

1. Wybierz lokalizację: Place the thermostat unit in a central area of the room where it can accurately measure the ambient temperature, away from direct sunlight, drafts, or heat sources.
2. Zainstaluj baterie: Open the battery compartment on the back of the thermostat unit. Insert the required batteries (typically AA or AAA, refer to the unit's markings) ensuring correct polarity. Close the compartment.
3. Włączanie: The display should light up, indicating the unit is powered.

5.2 Receiver Unit Wiring

WARNING: Electrical installation should only be performed by a qualified electrician. Disconnect power to the heating/cooling system before proceeding.

1. Montaż odbiornika: Secure the receiver unit near your boiler or air conditioning system using the provided screws and wall plugs.
2. Zaciski okablowania dostępowego: Open the cover of the receiver unit to expose the wiring terminals.
3. Połącz z systemem: Connect the receiver unit to the two-wire room thermostat connection point of your boiler or AC system. Ensure connections are secure and follow the wiring diagram provided with your heating/cooling system and the receiver unit. The COMPUTHERM Q7RF is compatible with both 24V and 230V control circuits.
4. Przywróć zasilanie: Once wiring is complete and verified, close the receiver unit cover and restore power to your heating/cooling system.

5.3 Pairing the Units (If not pre-paired)

Refer to the specific instructions provided with your Q7RF set for pairing procedures. Typically, this involves pressing a pairing button on the receiver unit and then initiating a pairing sequence on the thermostat unit within a short timeframe. A successful pairing will usually be indicated by an LED on the receiver or a message on the thermostat display.

6. Instrukcja obsługi

6.1 Zrozumienie wyświetlacza LCD

The LCD display provides all necessary information about the thermostat's current status and settings.

Rysunek 3: Szczegółowy view of the COMPUTHERM Q7RF LCD display, illustrating various indicators such as program number, manual modification symbol, weekdays, time, set temperature, actual room temperature, low battery symbol, boiler ON state, and timed control symbol.

• Dni powszednie: Wskazuje bieżący dzień tygodnia.
• Exact Time / Time Left: Displays the current time or time remaining for a manual modification.
• Numer programu: Shows the active program segment.
• Ustaw temperaturę: The desired temperature set by the user.
• Actual Room Temperature: The current temperature measured by the thermostat.
• Symbol for Manual Modification: Indicates that the thermostat is currently operating under a temporary manual override.
• Temp. Modified until next manual intervention: Shows the duration of a temporary temperature change.
• Symbol for Low Battery Voltage: Wyświetla się, gdy baterie wymagają wymiany.
• Symbol for Boiler ON State: Wskazuje, że układ ogrzewania/chłodzenia jest aktywny.
• Symbol for Timed Control: Indicates that a programmed schedule is active.

6.2 Ustawianie aktualnego czasu i dnia

1. Naciśnij CZAS przycisk.
2. Użyj + or - przyciski, aby ustawić godzinę, a następnie naciśnij CZAS jeszcze raz, aby potwierdzić.
3. Powtórz dla minut i dnia tygodnia.

6.3 Ręczna regulacja temperatury

1. W normalnym trybie pracy naciśnij + or - przyciski, aby ustawić żądaną temperaturę.
2. The new temperature will be maintained until the next programmed time slot or until manually overridden again.

6.4 Programming Daily/Weekly Schedules

The Q7RF allows for independent programming for each day of the week. You can typically set multiple time periods with different temperatures for each day.

1. Naciśnij ŻARCIE przycisk, aby wejść w tryb programowania.
2. Użyj DZIEŃ button to select the day you wish to program (e.g., MON, TUE, etc.).
3. Użyj CZAS I +/- buttons to set the start time for the first program period.
4. Użyj NASTAW TEMPERATURĘ I +/- buttons to set the desired temperature for this period.
5. Naciskać ŻARCIE again to move to the next program period for the same day, or use DZIEŃ aby przejść do następnego dnia.
6. Repeat until all desired periods and days are programmed.
7. Naciśnij URUCHOMIĆ or EXIT przycisk, aby zapisać i wyjść z trybu programowania.

7. Konserwacja

7.1 Wymiana baterii

When the low battery symbol appears on the LCD display, replace the batteries immediately to ensure continuous operation. Use new, high-quality alkaline batteries of the specified type.

1. Otwórz pokrywę komory baterii znajdującą się z tyłu termostatu.
2. Wyjmij stare baterie.
3. Insert new batteries, observing correct polarity (+/-).
4. Zamknij pokrywę komory baterii.

7.2 Czyszczenie

Clean the thermostat and receiver units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the units, as this may damage the electronics or finish.

8. Rozwiązywanie Problemów

9. Gwarancja i wsparcie

COMPUTHERM products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, please reach out to the COMPUTHERM customer service or your local distributor. Keep your purchase receipt as proof of purchase.