GROHE 26449000 Concealed Body Instruction Manual

1. Koniec produktuview

The GROHE 26449000 is a high-quality concealed body designed for use with GROHE thermostatic shower or bath mixer trim sets. This essential component is installed within the wall, providing the necessary connections and infrastructure for a clean, minimalist bathroom aesthetic. It features two 1/2" outlets and is suitable for wall mounting with an adjustable installation depth.

Główne cechy:

• Przeznaczony do montażu na ścianie.
• Equipped with two 1/2" outlets.
• Adjustable installation depth from 75 mm to 105 mm.
• Includes carrier material for wall sealing.
• Comes with an installation template for precise setup.

2. Informacje dotyczące bezpieczeństwa

Please read all instructions carefully before installation and use. Improper installation can lead to water damage or injury. Installation should be performed by a qualified professional in accordance with local plumbing and building codes.

• Przed rozpoczęciem instalacji należy upewnić się, że dopływ wody jest wyłączony.
• Podczas instalacji należy nosić odpowiedni sprzęt ochrony osobistej (PPE).
• Check for leaks thoroughly after installation is complete.
• Nie modyfikuj produktu w żaden sposób, który nie został opisany w niniejszej instrukcji.

3. Zawartość opakowania

Verify that all components are present and undamaged before starting installation. The package typically includes:

• GROHE 26449000 Concealed Body
• Carrier material for wall sealing
• Szablon instalacji
• Necessary mounting hardware (e.g., screws, anchors)
• Flexible hose (may vary by specific kit)
• Armatura przyłączeniowa

Figure 3.1: All components included with the GROHE 26449000 concealed body. This image shows the main concealed body unit, a flexible hose, and a sealing sheet, along with various connection fittings.

4. Konfiguracja i instalacja

The GROHE 26449000 concealed body is designed for precise wall mounting. Follow these steps for proper installation:

4.1 Planning and Preparation

1. Wybór lokalizacji: Choose a suitable location within the wall for the concealed body, ensuring it aligns with the desired position of the trim set and shower/bath outlets.
2. Otwór w ścianie: Create an opening in the wall that accommodates the dimensions of the concealed body and allows for the specified installation depth of 75 mm to 105 mm.
3. Zaopatrzenie w wodę: Ensure hot and cold water supply lines are accessible and can be connected to the two 1/2" inlets on the concealed body.

Figure 4.1: Detailed dimensions of the GROHE 26449000 concealed body, showing inlet/outlet spacing and overall unit size for planning purposes.

4.2 Mounting the Concealed Body

1. Pozycjonowanie: Use the provided installation template to mark the precise drilling points for mounting the concealed body within the wall opening.
2. Bezpieczne mocowanie: Securely fasten the concealed body to the wall structure using appropriate screws and anchors. Ensure it is level and firmly in place.
3. Przyłącza wodne: Connect the hot and cold water supply lines to the designated 1/2" inlets on the concealed body. Connect the shower/bath outlets to the corresponding 1/2" outlets.

Figure 4.2: An exploded diagram illustrating the internal components and connection points of the GROHE 26449000 concealed body, useful for understanding assembly.

4.3 Sealing and Finishing

1. Wall Sealing: Apply the provided carrier material for wall sealing around the concealed body to ensure a watertight installation, preventing moisture penetration into the wall structure.
2. Regulacja głębokości: Adjust the installation depth of the concealed body to be flush with the finished wall surface, within the 75-105 mm range.
3. Test szczelności: Before closing the wall, turn on the water supply and thoroughly check all connections for leaks. Rectify any leaks immediately.
4. Wall Closure: Once the leak test is successful, close and finish the wall around the concealed body, leaving access for the trim set installation.

Figure 4.3: The GROHE 26449000 concealed body shown with the wall sealing material applied, demonstrating how to ensure a watertight installation.

Rysunek 4.4: Byłyample of the GROHE 26449000 concealed body correctly installed within a wall, with the sealing material integrated for protection against moisture.

5. Instrukcja obsługi

The GROHE 26449000 is a concealed body and does not have direct operating controls. Its function is to provide the internal plumbing for a compatible GROHE thermostatic mixer trim set. Once the trim set is installed, refer to the instruction manual provided with your specific GROHE trim set for operating instructions, including temperature control, flow adjustment, and diverter functions.

Ensure that the trim set is correctly installed onto the concealed body according to its specific instructions to guarantee proper functionality and prevent leaks.

6. Konserwacja

As a concealed unit, the GROHE 26449000 requires minimal maintenance once properly installed. However, regular checks of the visible trim set and general plumbing can help ensure longevity.

• Wykrywanie wycieków: Periodically check for any signs of water leakage around the trim set or in adjacent wall areas. Address any leaks promptly.
• Jakość wody: In areas with hard water, mineral deposits can affect the performance of the thermostatic cartridge (located in the trim set). Regular flushing or professional descaling may be required for the trim set.
• Inspekcja profesjonalna: Consider a professional plumbing inspection every few years to ensure all concealed components are functioning correctly and to prevent potential issues.

7. Rozwiązywanie Problemów

Most issues related to a concealed shower system typically stem from the visible trim set or external plumbing. However, here are some general troubleshooting tips:

• Brak przepływu wody:
  • Check if the main water supply to the property or bathroom is turned on.
  • Ensure the trim set's controls are in the "on" position.
  • Verify that any shut-off valves for the concealed body are fully open.
• Niskie ciśnienie wody:
  • Check the main water pressure to your home.
  • Inspect the trim set's filters or aerators for blockages.
  • Ensure all connections to the concealed body are fully open and not restricted.
• Temperature Fluctuations (if using a thermostatic trim set):
  • This is usually an issue with the thermostatic cartridge in the trim set. Refer to the trim set's manual.
  • Ensure hot and cold water supplies are correctly connected to the concealed body (hot on left, cold on right, typically).
• Wycieki:
  • If leaks are visible around the trim set, check its seals and connections.
  • If water appears in the wall or floor, this indicates a leak in the concealed body or its connections. Immediately turn off the water supply and contact a qualified plumber.

For persistent issues, it is recommended to contact a qualified plumber or GROHE customer support.

8. Specyfikacje

9. Gwarancja i wsparcie

GROHE products are manufactured to the highest standards and undergo rigorous quality checks. For specific warranty information, please refer to the warranty card included with your product or visit the official GROHE webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

For technical support, spare parts, or service inquiries, please contact GROHE customer service or your local GROHE dealer. Contact information can typically be found on the GROHE webmiejscu lub w opakowaniu produktu.

GROHE Official Webstrona: www.grohe.pl