iFlight 43234-1976

iFlight 2.4G Receiver Antenna (150mm, IPEX 4) Instruction Manual

Model: 43234-1976

Wstęp

This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.

Przed użyciem należy uważnie przeczytać instrukcję, aby zapewnić optymalne działanie i trwałość produktu.

Cechy produktu

  • Typ złącza: 2.4G receiver antenna with IPEX 4 Generation connector.
  • Długość: 5.9 inches (150mm) total length.
  • Tworzywo: RF113 Silver plated Wire Material for enhanced signal transmission.
  • Wydajność: Precision machining ensures low loss signal stability and high sensitivity.
  • Zgodność: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.

Zawartość opakowania

The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.

A bundle of iFlight 2.4G receiver antennas with IPEX 4 connectors.

Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.

Konfiguracja i instalacja

  1. Zidentyfikuj typ złącza: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
  2. Comparison image showing the 'new version IPEX4' connector next to a 'regular version IPEX (bigger port)'.

    Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.

  3. Połącz z odbiornikiem: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
  4. Umiejscowienie anteny: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
  5. Bezpieczna antena: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
A FrSky receiver with an iFlight 2.4G receiver antenna connected.

Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.

Instrukcja obsługi

Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.

Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.

Konserwacja

  • Regularna kontrola: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
  • Czystość: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
  • Składowanie: When not in use, store the antennas in a dry, cool place, protected from physical damage.
  • Wymiana: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.

Rozwiązywanie problemów

Problem: Poor Signal / Frequent Failsafes
  • Sprawdź połączenie: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
  • Umiejscowienie anteny: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
  • Uszkodzenie anteny: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
  • Receiver Issues: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
Problem: Antenna Does Not Fit
  • Verify Connector Type: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.

Specyfikacje

Parametr Wartość
Numer modelu 43234-1976
Typ anteny 2.4G Receiver Antenna
Typ złącza IPEX 4 Generation
Długość 150 mm (5.9 cali)
Materiał drutu RF113 Silver plated
Impedancja 50 omy
Zakres częstotliwości 2400 - 2500 MHz
SWR <= 2.0
Osiągać 2
Temperatura pracy -40 °C do +65 °C
Temperatura przechowywania -40 °C do +80 °C
Item Weight (per antenna) Approximately 0.5g (as shown in product images)
An iFlight 2.4G receiver antenna laid out next to a ruler, indicating its 150mm length.

Image: The 150mm length of the antenna measured against a ruler.

An iFlight 2.4G receiver antenna coiled on a digital scale, showing a weight of 0.5g.

Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.

Oficjalny film o produkcie

Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)

Gwarancja i wsparcie

For warranty information and technical support, please refer to the official iFlight webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Szczegółowe warunki gwarancji mogą się różnić w zależności od regionu i sprzedawcy.

© 2026 iFlight. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.