Lithonia Lighting WF6 LED 30K MW M6 Recessed Wafer Downlight Instruction Manual

1. Koniec produktuview

The Lithonia Lighting Wafer-Thin LED recessed downlight with remote driver box offers high-quality light output and efficiency. Its innovative wafer-slim, Type IC design allows for easy installation in new construction or remodel projects from below the ceiling, eliminating the need for a traditional pot light housing.

This downlight is designed for versatility and can be installed in various indoor and outdoor residential, hospitality, commercial, and multifamily applications.

Figure 1: Lithonia Lighting WF6 LED Recessed Wafer Downlight

2. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Always turn off power at the main circuit breaker before beginning any electrical installation or maintenance. Failure to do so may result in serious injury or death.

• Wear appropriate personal protective equipment, including safety glasses, during installation.
• Upewnij się, że wszystkie połączenia elektryczne są bezpieczne i zgodne z lokalnymi przepisami elektrycznymi.
• This product is rated for 120V input voltage. Verify your power supply matches this requirement.
• The fixture is IC Rated, Wet Listed, and Air Tight, making it safe for contact with insulation and suitable for damp lub w miejscach wilgotnych.

3. Zawartość opakowania

Sprawdź, czy w pakiecie znajdują się wszystkie komponenty:

• LED Module (Downlight Fixture)
• Zdalna skrzynka sterowników
• Arkusz instrukcji instalacji
• Hole Template (for new ceiling cutouts)
• Wago Connectors (for electrical connections)

Figure 2: Remote Driver Box and LED Module

4. Instrukcja instalacji

This downlight requires only 2 inches of ceiling clearance for installation.

4.1. Prepare the Ceiling Hole

1. Zmierz i zaznacz: Double-check and measure the existing ceiling hole. If a new hole is required, use the provided hole template or a drill saw with the appropriate diameter (5.9 inches for the back hole size) to mark the center and cut the opening. Ensure the hole size allows the luminaire's outside trim to cover it while the spring clips secure the fixture.
2. Pull Wiring: Pull the electrical wire through the cut-out hole and cut to the needed length.

Figure 3: Ceiling Hole Preparation and Wiring

4.2. Connect the Remote Driver Box

3. Open Driver Box: Otwórz pokrywę skrzynki zdalnego sterownika i wyjmij jeden z otworów w płycie bocznej.
4. Połączenia przewodowe: Locate the power supply leads from the remote driver box. Connect the black wire to the live wire, the white wire to the neutral wire, and the green wire to the ground wire using the provided Wago connectors. Ensure all connections are made securely inside the driver box.
5. Close Driver Box: Close the cover of the driver box.
6. Position Driver Box: Place the remote driver box through the cut-out hole and lay it on the ceiling above the drywall.

4.3. Install the LED Module

7. Podłącz moduł: Connect the LED module to the remote driver box and tighten the nut connector.
8. Wstaw moduł: Pull the spring clips on the fixture up and through the ceiling hole. Place the module into the hole, ensuring the spring clips hold securely to the ceiling.

4.4. Ostatnie kroki

9. Przywróć zasilanie: Turn on the electricity at the circuit breaker box.
10. Sprawdź działanie: Turn the power in the room back on and ensure the LED module illuminates.

4.5. Film instalacyjny

Video 1: Step-by-step installation guide for the Lithonia Lighting Ultra-Thin Wafer Downlight. This video demonstrates the process of cutting the ceiling hole, wiring the remote driver box, and securing the LED module.

5. Instrukcja obsługi

The Lithonia Lighting WF6 LED Downlight is designed for simple operation.

• Włączanie/wyłączanie: Sterowanie oświetleniem odbywa się za pomocą standardowego przełącznika ściennego podłączonego do obwodu.
• Funkcja ściemniania: This downlight is dimmable. For optimal performance, use with compatible LED dimmers. A list of compatible dimmers can be found on the product's spec sheet.
• Temperatura barwowa: This specific model (WF6 LED 30K MW M6) provides a 3000K (Bright White) color temperature. Other models in the series may offer selectable color temperatures.

Rysunek 4: Example of different color temperatures in a room setting. This model provides 3000K.

6. Konserwacja

The Lithonia Lighting WF6 LED Downlight requires minimal maintenance.

• Czyszczenie: Ensure power is off before cleaning. Use a soft, dry cloth to wipe the surface of the fixture. Avoid abrasive cleaners or solvents that may damage the finish.
• Żywotność LED: The integrated LED has an average life of 36,000 hours, which translates to over 16 years when used 6 hours per day. No bulb replacement is necessary.

7. Rozwiązywanie Problemów

If you encounter issues with your downlight, refer to the following common troubleshooting steps:

• Światło nie włącza się:
  • Sprawdź wyłącznik automatyczny, aby upewnić się, że do urządzenia jest dostarczane zasilanie.
  • Verify all electrical connections in the remote driver box are secure.
  • Ensure the connection between the LED module and the driver box is tight.
• Problemy z migotaniem lub przyciemnianiem:
  • Ensure you are using an LED-compatible dimmer switch. Incompatible dimmers can cause flickering or improper dimming.
  • Sprawdź, czy połączenia przewodów nie są luźne.
• Fixture Not Sitting Flush:
  • Verify the ceiling hole diameter is correct (5.9 inches for the back hole). A hole that is too large may prevent the spring clips from holding securely.
  • Ensure the spring clips are fully engaged and holding the fixture firmly against the ceiling.

8. Specyfikacje

Rysunek 5: Wymiary produktu

Rysunek 6: Certyfikaty produktów

9. Gwarancja i wsparcie

Gwarancja: This Lithonia Lighting product comes with a 5-year limited warranty.

For further assistance, technical support, or warranty claims, please contact Lithonia Lighting customer service or visit their official website. Refer to the product packaging or the official Lithonia Lighting webna tej stronie znajdziesz najbardziej aktualne dane kontaktowe.