Surecom SW-102 Digital VHF/UHF Antenna Power & SWR Meter User Manual

1. Wprowadzenie

The Surecom SW-102 is a compact and versatile digital VHF/UHF antenna power and SWR meter designed for radio enthusiasts and professionals. It provides direct digital readout of VSWR, forward power, and reflected power without the need for calibration. Its low insertion loss allows for permanent connection within your setup. The device also features a built-in frequency counter and displays comprehensive information including frequency, power, SWR, forward power (FW), reflected power (RW), and battery voltage.

2. Informacje dotyczące bezpieczeństwa

• Nie wystawiaj urządzenia na działanie ekstremalnych temperatur, wilgoci ani bezpośredniego światła słonecznego.
• Unikaj upuszczania urządzenia i narażania go na silne uderzenia.
• Nie należy podejmować prób demontażu ani modyfikacji urządzenia. Spowoduje to unieważnienie gwarancji i może spowodować uszkodzenia.
• Use only the specified charger (5V micro USB) to prevent damage to the battery and device.
• Ensure proper connection of all cables and adapters before operation to prevent damage to the meter or connected equipment.
• This device is designed for analog radio systems only and is not compatible with DMR radios.

3. Zawartość opakowania

Po otwarciu opakowania prosimy sprawdzić, czy wszystkie wymienione poniżej elementy znajdują się w opakowaniu i są w dobrym stanie:

• 1x SURECOM SW-102 Meter
• 1x Charger Cable (Micro USB)
• 1x Users Manual
• SL16 to SMA-F Connector (included)
• SL16 to SMA-M Connector (included)

4. Koniec produktuview

4.1. Główne cechy

• Direct digital readout of VSWR, Forward Power, and Reflected Power.
• Kalibracja nie jest wymagana.
• Maximum measurable power range up to 120W.
• Low insertion loss (<0.15dB VHF, <0.25dB UHF) allows permanent connection.
• Built-in Frequency Counter.
• All-function display: Frequency, Power, SWR, FW, RW, Battery voltage.
• Compact and handheld size with large LCD display.

4.2. Komponenty i elementy sterujące

The SW-102 features an N-J Interface for connections. Optional accessories such as SL16 to SMA and SL16 to BNC adapters are available to ensure compatibility with various radio and antenna connectors.

5. Konfiguracja

5.1. Connecting the Meter

To connect the Surecom SW-102, connect the output of your transceiver to the "TX" port on the meter. Then, connect your antenna or dummy load to the "ANT" port. Ensure proper adapters or cables are used if your device has different connector types. The device ships with SL16 to SMA-F and SL16 to SMA-M connectors for common applications.

Watch the video below for a visual guide on connecting the SW-102 to your radio and antenna:

5.2. Włączanie

To power on the SW-102, press and hold the Czerwony przycisk for 2 seconds. To power off, press and hold the Czerwony przycisk ponownie przez 2 sekundy.

6. Instrukcja obsługi

6.1. Wykonywanie pomiarów

Once connected and powered on, the SW-102 will display real-time measurements. To measure SWR and power, ensure the meter is in a vertical position and avoid touching the antenna during measurement. Press the PTT (Push-To-Talk) button on your radio to transmit, and the meter will display the VSWR, transmit power, and other relevant data.

Voltage Standing Wave Ratio (VSWR) is an indication of the amount of mismatch between an antenna and the feed line connecting to it. The range of values for VSWR is from 1 to ∞. A VSWR value under 2 is considered suitable for most antenna applications. The antenna can be described as having a good match. So when someone says that the antenna is poorly matched, very often it means that the VSWR value exceeds 2 for a frequency of interest.

6.2. Wyświetl wprowadzenie

The LCD display provides comprehensive information at a glance. Key indicators include:

• Stan baterii
• Czas pracy
• Moc nadawania (W)
• Częstotliwość transmisji (MHz)
• VSWR (Tomtage Współczynnik fali stojącej)
• Forward Power (FW)
• Reflected Power (RW)

6.3. Function Memory Save

To save function memory settings:

1. Naciśnij MENU (Blue button).
2. Naciskać F1 (Red button) to select a function (1-6).
3. Dostosuj wartości za pomocą Blue button (-) I Yellow button (+).
4. Naciśnij Czerwony przycisk przez 2 sekundy, aby potwierdzić.
5. Naciśnij Niebieski przycisk to SAVE and EXIT.

7. Konserwacja

7.1. Ładowanie akumulatora

The SW-102 is equipped with a 3.7V Li-ion rechargeable battery (14500 type). To charge the device, connect the provided USB charger cable to the micro USB port on the side of the meter and plug the other end into a 5V (0.5-1A) USB power source.

7.2. Funkcje oszczędzania energii

• Urządzenie charakteryzuje się: Automatyczne wyłączanie zasilania function, configurable from 1 to 9 minutes.
• Ten Podświetlenie also has an AUTO OFF feature, configurable from 1 to 9 minutes, to conserve battery life.

8. Rozwiązywanie Problemów

• If the device does not power on, ensure the battery is charged.
• If readings are inconsistent, check all cable connections for tightness and proper adapter usage.
• Ensure the SW-102 is used with analog radios only. To jest not compatible with DMR radios.
• For significant discrepancies in SWR readings, verify the antenna's condition and proper installation.

9. Specyfikacje

10. Gwarancja i wsparcie

Specific warranty information and detailed support contacts are not provided in this manual. Please refer to the product packaging or the manufacturer's official webstrona zawierająca szczegóły gwarancji i opcje obsługi klienta.