iGaging 35-408 Digital Protractor with 10" Rule, 11" - Instruction Manual

Produkt ponadview

The iGaging 35-408 Digital Protractor with 10" Rule is a precision instrument designed for accurately setting and measuring angles. It features durable stainless steel arms with both inch and metric scales for versatile linear measurements. The integrated digital display provides angle readings in 0.05-degree increments, ensuring high precision for various applications. This tool is equipped with a hold function to retain measurements and a reverse reading capability for convenience in challenging positions. It can measure angles across a full 0 to 360-degree range.

Figure 1: The iGaging 35-408 Digital Protractor, illustrating its primary components including the digital display and the two stainless steel rules.

Zawartość opakowania

• iGaging 35-408 Digital Protractor with 10" Rule
• Protective Plastic Pouch
• Dodatkowa bateria

Figure 2: The iGaging Digital Protractor as packaged, including the protective plastic pouch.

Organizować coś

1. Rozpakowywanie: Carefully remove the digital protractor from its protective plastic pouch.
2. Montaż baterii: The device comes with a pre-installed battery. An extra battery is provided for future replacement. To replace the battery, locate the battery compartment on the digital display unit, open it, insert the new battery with the correct polarity, and close the compartment securely.
3. Pierwsze włączenie: Press the "ON/OFF" button to power on the device. The digital display should illuminate and show a reading.

Instrukcja obsługi

Basic Angle Measurement

1. Włączanie: Naciśnij WŁ./WYŁ. button to turn on the protractor.
2. Zerowanie wyświetlacza: To set the current position as the zero reference, press the ZERO button. This is useful for measuring relative angles.
3. Pozycjonowanie ramion: Place the protractor's arms against the surfaces of the angle you wish to measure. Ensure both arms are flush with the surfaces for an accurate reading.
4. Reading the Angle: The angle will be displayed instantly on the large LCD screen in 0.05-degree increments.

Figure 3: Demonstrating the use of the digital protractor to measure an angle on a workpiece.

Korzystanie z funkcji wstrzymania

• After obtaining a measurement, press the HOLD/Rev. button once to freeze the reading on the display. The "HOLD" indicator will appear.
• Aby zwolnić przytrzymanie i wznowić pomiar na żywo, naciśnij przycisk HOLD/Rev. naciśnij przycisk ponownie.

Reverse Reading Capability

• Ten HOLD/Rev. button also functions as a reverse reading toggle. Press and hold this button to invert the display reading, which can be useful when the protractor is in an inverted position.

Linear Measurement

• The stainless steel arms are graduated with both inch and metric scales, allowing for direct linear measurements up to 10 inches or 25 cm.

Figure 4: The protractor used as a linear measuring rule, showcasing jego podwójnej funkcjonalności.

Konserwacja

• Czyszczenie: Wipe the protractor with a soft, dry cloth after each use to remove dust and debris. Avoid using abrasive cleaners or solvents.
• Składowanie: Store the protractor in its protective plastic pouch when not in use to prevent scratches and damage. Keep it in a dry environment.
• Wymiana baterii: If the display becomes dim or unresponsive, replace the battery. Refer to the "Setup" section for battery replacement instructions.

Rozwiązywanie problemów

Specyfikacje

• Model: 35-408
• Marka: iGaging
• Zakres pomiarowy: 0 do 360 stopni
• Dokładność: Przyrosty o 0.05 stopień
• Rule Length: 10 cali (25 cm)
• Tworzywo: Stal nierdzewna
• Cechy: Large LCD display, Hold function, Reverse reading capability, Inch and Metric scales
• Źródło zasilania: Button cell battery (extra battery included)
• Wymiary: Około 12.4 x 2.9 x 0.6 cala (w opakowaniu)
• Waga: Approximately 0.01 ounces (packaged)

Gwarancja i wsparcie

For warranty information or technical support, please contact iGaging directly. Refer to the product packaging or the official iGaging webna naszej stronie znajdziesz najnowsze dane kontaktowe i warunki gwarancji.

Producent: iGaging

Pierwsza dostępna: 21 września 2009 r.