TechCare Massager TENS Unit Muscle Stimulator User Manual

Wstęp

The TechCare Massager TENS Unit is a dual-channel electrical nerve and muscle stimulator designed to provide temporary relief from pain associated with sore and aching muscles due to strain from exercise or normal household and work activities. This device utilizes Transcutaneous Electrical Nerve Stimulation (TENS) and Electrical Muscle Stimulation (EMS) technologies to deliver low-voltage pulses to the skin, stimulating nerve fibers and promoting muscle contraction and relaxation. Please read this manual thoroughly before use to ensure safe and effective operation.

Co jest zawarte

Carefully unpack your TechCare Massager TENS Unit and verify that all items listed below are present and in good condition.

• 1 x TechCare Massager Controller
• 4 x Large/Medium Electrode Pads (2 large, 2 medium)
• 2 x małe elektrody
• 2 x kable elektrodowe
• 1 x Torba transportowa
• 1 x Instrukcja obsługi (ten dokument)
• 1 x kabel ładujący USB
• 1 x Electrode Pad and Wire Holder
• 1 x Treatment Points Chart

Image: All components included in the TechCare Massager TENS Unit package.

Urządzenie ponadview

Familiarize yourself with the main components and controls of your TechCare Massager TENS Unit.

Image: Front panel of the TENS Unit showing the display and control buttons.

• Wskaźnik czasu: Displays the remaining session time.
• Wskaźnik baterii: Pokazuje aktualny poziom naładowania baterii.
• Tryby masażu: Icons representing the 24 preprogrammed massage modes.
• Strength Indicator: Bar graph showing the current intensity level (20 levels).
• Mode Selection (M) Button: Press to cycle through the 24 massage modes.
• Strength Adjuster (+/-) Buttons: Press '+' to increase intensity, '-' to decrease intensity.
• Time Adjuster (T) Button: Press to adjust the session duration (each press adds 20 minutes).

Organizować coś

1. Ładowanie urządzenia

1. Connect the USB charger cable to the charging port on the device.
2. Podłącz drugi koniec kabla USB do kompatybilnego zasilacza USB (nie ma go w zestawie) lub do portu USB komputera.
3. The battery indicator on the display will show charging status. A full charge can take up to 10 hours for the initial charge.
4. Once fully charged, the device can provide up to 20 hours of use.

2. Attaching Electrode Pads and Cables

1. Przed podłączeniem lub odłączeniem elektrod należy upewnić się, że urządzenie jest wyłączone.
2. Gently peel the electrode pads from their protective film. Retain the film for storage.
3. Snap the electrode cables onto the metal studs of the electrode pads. Ensure a secure connection.
4. Insert the pin connectors of the electrode cables firmly into the output ports on the top or bottom of the TENS unit.

3. Applying Electrode Pads

1. Clean and dry the skin area where you intend to place the pads. Avoid applying to broken or irritated skin.
2. Place the electrode pads firmly on the desired treatment area. Refer to the included Treatment Points Chart for recommended placements.
3. Ensure pads are not touching each other.

Obraz: Byłyample of electrode pad placement for various body areas.

Instrukcja obsługi

1. Włączanie/wyłączanie zasilania

• To turn on the device, press and hold the 'M' (Mode Selection) button for a few seconds until the screen illuminates.
• To turn off the device, press and hold the 'M' button again for a few seconds until the screen turns off.

2. Selecting a Massage Mode

• After powering on, the device will display the current mode.
• Press the 'M' button repeatedly to cycle through the 24 preprogrammed massage modes (e.g., Tapping, Acupuncture, Deep Tissue, Foot, Cupping, Combo).
• Select the mode that best suits your needs.

3. Regulacja intensywności

• Once a mode is selected, use the '+' button to increase the intensity of the stimulation.
• Use the '-' button to decrease the intensity.
• There are 20 levels of adjustable strength. Start with a low intensity and gradually increase until you feel a comfortable, yet effective, sensation. Avoid setting the intensity too high, which can cause discomfort.

4. Setting Session Time

• Press the 'T' (Time Adjuster) button to set the desired session duration.
• Each press of the 'T' button will add 20 minutes to the session time.
• The device will automatically shut off once the set time has elapsed.

Konserwacja

1. Czyszczenie urządzenia

• Przed czyszczeniem wyłącz urządzenie i odłącz wszystkie kable.
• Przetrzyj urządzenie miękką, lekko damp płótno. Nie używaj ściernych środków czyszczących ani nie zanurzaj urządzenia w wodzie.
• Przed schowaniem lub następnym użyciem należy upewnić się, że urządzenie jest całkowicie suche.

2. Dbanie o elektrody

• After each use, gently remove the pads from your skin and reattach them to their protective film.
• If the pads lose their adhesiveness, clean them with a small amount of water and let them air dry. This can help restore stickiness.
• Replace pads when they no longer adhere well to the skin, as poor adhesion can reduce effectiveness and cause discomfort.

3. Przechowywanie

• Store the device and accessories in the provided carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Przechowywać w miejscu niedostępnym dla dzieci.

Rozwiązywanie problemów

Specyfikacje

• Wymiary produktu: 3.3 x 0.2 x 2.5 cala
• Waga: 2 uncji
• Producent: Otto Trading
• Numer modelu (ASIN): B01JAVH23C
• Tryby masażu: 24 preprogrammed modes
• Poziomy intensywności: 20 regulowane poziomy
• Źródło zasilania: Rechargeable internal lithium battery
• Czas pracy baterii: Do 20 godzin na jednym ładowaniu

Gwarancja i wsparcie

TechCare Massager offers a Dożywotnia gwarancja and Hassle-Free Return policy for this product. For any questions, concerns, or warranty claims, please contact TechCare Massager customer support directly.

Producent: Otto Trading

Sprzedający: Masażer TechCare

For support, please visit the TechCare Massager store on Amazon or refer to the contact information provided with your purchase documentation.