1. Wprowadzenie
The Venitem MURANO-LS is a self-powered anti-foam siren designed for robust security applications. It features advanced technical capabilities including automatic speaker and battery efficiency testing, LED flasher with alarm memory, and flexible installation signaling. Built with SMD technology and protected against polarity reversal, this siren ensures reliable performance in various environments. Its IP44 rating guarantees protection against dust and splashing water.
Rysunek 1: Venitem MURANO-LS Self-Powered Anti-Foam Siren. This image displays the external view of the siren, typically mounted on a wall, showcasing its design and robust casing.
2. Informacje dotyczące bezpieczeństwa
- Przeczytaj wszystkie instrukcje: Before installation and operation, carefully read and understand all instructions in this manual.
- Wykwalifikowany personel: Installation and maintenance should only be performed by qualified personnel to ensure safety and proper functioning.
- Zasilanie: Ensure the power supply matches the product specifications (12 V DC). Disconnect power before any installation or maintenance.
- Biegunowość: The electronic circuit is protected against polarity reversal, but always ensure correct wiring to prevent damage.
- Montowanie: Mount the siren securely on a stable surface to prevent accidental detachment.
- Ciśnienie akustyczne: The siren produces a high sound pressure level (105 dB at 3m). Avoid prolonged exposure to prevent hearing damage.
- Warunki środowiskowe: The siren is rated IP44, providing protection against splashing water and solid objects larger than 1mm. Do not immerse the device in water.
3. Konfiguracja i instalacja
3.1. Koniec komponentówview
- ABS plastic siren base
- Centering bulb
- Inner and outer covers (varnished ABS, pearlescent or metallic colors)
- LED flasher (smoked dome)
- Double magnetic reed tamper switch (anti-opening and anti-tear)
- Electronic circuit board (SMD technology, resin-immersed)
- Battery housing (for 12 V 2.2 Ah battery, battery not included)
3.2. Montaż syreny
- Select a suitable mounting location, ensuring it is secure and provides optimal sound coverage.
- Open the siren casing by disengaging the tamper przełączniki.
- Use the ABS plastic siren base as a template to mark drilling points on the wall.
- Drill holes and secure the siren base to the wall using appropriate fasteners.
- Ensure the centering bulb is correctly positioned.
3.3. Okablowanie i podłączenie zasilania
- Connect the 12 V DC power supply to the designated terminals. The electronic circuit is protected against polarity reversal.
- Install a 12 V 2.2 Ah battery (not included) into the battery housing. Ensure correct polarity.
- Connect the control wires for activation. The siren supports 2 or 3-wire activation and programming for positive or negative control.
- Connect the ON-OFF installation signaling wires (for permanent or timed signaling).
- Verify all connections are secure and correct before proceeding.
3.4. Programowanie
The MURANO-LS siren offers flexible programming options:
- Wejście sterujące: Program for positive or negative control signals.
- Tryb aktywacji: Choose between 2-wire or 3-wire activation.
- Sound and Timing: Select from 4 distinct sound programs and timing configurations.
- Cykle alarmowe: Configure for 4 daily alarm cycles or infinite cycles.
- Refer to the detailed wiring diagram (not provided in this manual, typically found in a separate installation guide) for specific programming jumper or switch settings.
4. Instrukcja obsługi
4.1. Pierwsze uruchomienie
- After completing installation and wiring, apply 12 V DC power to the siren.
- The siren will perform an automatic test of the speaker and battery efficiency.
- Observe the LED flasher for initial status indications.
4.2. Aktywacja alarmu
When an alarm signal is received from the control panel (via the programmed 2 or 3-wire input):
- The siren will activate, emitting the pre-programmed sound.
- The LED flasher will activate, providing visual indication of the alarm.
- The flasher includes an alarm memory function, indicating if an alarm occurred even after it has ceased.
4.3. Siren Failure Output
The siren provides an output signal in case of a siren failure, allowing it to be connected to a control panel for remote monitoring of its operational status.
5. Konserwacja
- Regularne czyszczenie: Okresowo czyść zewnętrzną część syreny miękką,amp ściereczka. Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
- Sprawdzenie baterii: The siren performs an automatic battery efficiency test. If a battery fault is indicated (e.g., via the siren failure output or specific LED patterns, refer to your control panel manual), replace the 12 V 2.2 Ah battery with a new one of the same specifications.
- Tamper Switches: Ensure the double magnetic reed tamper switches are clean and free from obstructions to guarantee proper anti-opening and anti-tear protection.
- Kontrola wizualna: Regularly inspect the siren for any signs of physical damage, loose connections, or environmental wear.
- Inspekcja profesjonalna: It is recommended to have the siren professionally inspected and serviced by a qualified technician at least once a year.
6. Rozwiązywanie Problemów
This section provides solutions to common issues. For problems not listed here, or if the issue persists, please contact Venitem technical support or your installer.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Siren does not activate | No power supply; Incorrect wiring; Control signal not received; Dead battery. | Check 12 V DC power connection; Verify all wiring connections; Ensure control panel is sending an alarm signal; Check and replace battery if necessary. |
| LED flasher not working | Flasher fault; Power issue. | Check power supply; Contact technical support if flasher remains inactive during an alarm. |
| Siren failure output active (false alarm) | Tamper switch triggered; Internal fault; Low battery. | Ensure siren casing is properly closed and secured; Check battery status; Contact technical support. |
| Siren sounds continuously or erratically | Faulty control signal; Internal circuit issue. | Verify control panel output; Disconnect power and reconnect; If issue persists, contact technical support. |
7. Specyfikacje techniczne
| Funkcja | Specyfikacja |
|---|---|
| Model | MURANO-LS |
| Marka | Venitem |
| Zasilacz | 12 V prądu stałego |
| Prąd spoczynkowy | 15mA |
| Alarm Current (with battery) | 500mA |
| Poziom ciśnienia akustycznego | 105 dB(A) w odległości 3 m |
| Obudowa akumulatora | For 12 V 2.2 Ah battery (battery not included) |
| Wymiary (szer. x wys. x gł.) | Wymiary: 236 x 312 x 109 mm |
| Stopień ochrony | IP44 |
| Certyfikaty | IMQ Level II |
| Cechy | Automatic speaker/battery test, Siren failure output, LED flasher with alarm memory, ON-OFF installation signaling, 4 sound/timing programs, 2/3-wire activation, Double magnetic reed tampeee. |
| Budowa | ABS plastic base, resin-immersed SMD electronic circuit, varnished ABS covers. |
8. Gwarancja i wsparcie
8.1. Informacje o gwarancji
Specific warranty details for the Venitem MURANO-LS siren are typically provided at the point of purchase or within separate documentation included with the product. Please retain your proof of purchase for warranty claims. The warranty generally covers manufacturing defects under normal use. Damage resulting from improper installation, misuse, or unauthorized modifications is not covered.
8.2. Wsparcie techniczne
For technical assistance, troubleshooting, or inquiries regarding your Venitem MURANO-LS siren, please contact your authorized Venitem dealer or the installer of your security system.
You may also visit the official Venitem website for further information or to find contact details for customer support in your region.
