1. Wprowadzenie
The Vivitar VIV-PGBT-T5I Battery Grip is designed to enhance the functionality and ergonomics of compatible Canon Rebel cameras. It allows for extended shooting times by accommodating two Li-ion batteries or six AA batteries. Additionally, it provides a comfortable grip for vertical shooting, featuring an extra shutter release button and control dials for convenient access to camera functions.
Image 1.1: The Vivitar VIV-PGBT-T5I Battery Grip. This image shows the battery grip attached to a camera body, highlighting its ergonomic design and the additional controls for vertical shooting.
2. Konfiguracja i instalacja
2.1. Instalowanie baterii
The battery grip can be powered by either two compatible Li-ion batteries or six AA batteries using the included adapter plate.
- For Li-ion Batteries:
- Open the battery compartment door on the grip.
- Insert two fully charged Li-ion batteries, ensuring correct polarity as indicated inside the compartment.
- Dokładnie zamknij pokrywę komory baterii.
- Dla baterii AA:
- Slide the AA battery adapter plate out of the grip.
- Insert six AA batteries into the adapter plate, observing the polarity markings.
- Slide the loaded adapter plate back into the grip until it locks into place.
2.2. Mocowanie uchwytu do aparatu
- Upewnij się, że kamera jest wyłączona.
- Remove the camera's battery and the battery compartment door. Store the door in a safe place.
- Wyrównaj śrubę mocującą uchwyt akumulatora z gniazdem statywu aparatu.
- Insert the grip's electrical contact into the camera's battery compartment.
- Tighten the mounting screw on the grip until it is firmly attached to the camera. Do not overtighten.
3. Instrukcja obsługi
3.1. Włączanie/wyłączanie zasilania
After attaching the grip and installing batteries, power on your camera as usual. The grip's power button (if present and active) may need to be engaged to enable the grip's controls. Refer to your camera's manual for specific power management settings when using an external grip.
3.2. Sterowanie fotografowaniem w pionie
The Vivitar VIV-PGBT-T5I Battery Grip provides duplicate controls for comfortable vertical shooting.
- Przycisk zwalniania migawki: Use the grip's shutter release button for vertical shots. It functions identically to the camera's main shutter button, including half-press for autofocus and full-press for capturing an image.
- Pokrętła sterujące: The front and rear control dials on the grip allow for quick adjustments to exposure settings (e.g., aperture, shutter speed) while holding the camera vertically.
- Other Control Buttons: Various other buttons on the grip replicate essential camera functions, providing convenient access without needing to reposition your hand.
4. Konserwacja i pielęgnacja
- Keep the battery grip clean and dry. Use a soft, dry cloth to wipe off dust and smudges.
- Avoid exposing the grip to extreme temperatures, humidity, or direct sunlight.
- Jeśli nie używasz uchwytu przez dłuższy czas, wyjmij baterie, aby zapobiec ich wyciekowi.
- Do not attempt to disassemble or repair the grip yourself. Contact qualified service personnel if issues arise.
5. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Sterowanie uchwytem nie reaguje. |
|
|
| Camera not powering on with grip. |
|
|
6. Specyfikacje
- Model: VIV-PGBT-T5I
- Marka: Vivitar
- Kompatybilne mocowania: Canon EF (for compatible Canon Rebel cameras)
- Źródło zasilania: 2 x Li-ion batteries or 6 x AA batteries (batteries not included)
- Zawartość zestawu: Battery Grip, AA Battery Adapter Plate
- Kolor: Czarny
- Waga przedmiotu: Approximately 0.9 Pounds (without batteries)
- Producent: Sakar International, Inc.
7. Gwarancja i wsparcie
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Vivitar webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.
Producent: Sakar International, Inc.
Numer modelu: VIV-PGBT-T5I