BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light User Manual

Wstęp

This manual provides essential information for the safe and effective installation, operation, and maintenance of your BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light. Please read this manual thoroughly before use and retain it for future reference.

Informacje dotyczące bezpieczeństwa

Przed instalacją lub konserwacją należy upewnić się, że zasilanie jest odłączone.
This LED strip is designed for 12V DC power only. Connecting to a higher voltaguszkodzimy produkt.
This product is IP30 rated, meaning it is non-waterproof. Avoid exposure to water or high humidity.
Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit board or LEDs.
Ensure proper ventilation around the LED strip to prevent overheating.
Przechowywać w miejscu niedostępnym dla dzieci.
Only use the recommended power adapter (DC12V3A) or a compatible power supply.

Zawartość opakowania

Sprawdź, czy wszystkie komponenty są obecne i w dobrym stanie:

1 x BTF-LIGHTING 16.4ft (5m) Warm White SMD5630 LED Strip Light
1 x Remote Control (if included with your specific package)
Note: Power adapter is typically sold separately.

Specyfikacje

Marka	OŚWIETLENIE BTF
Numer modelu	56305MWW60W30
Typ diody LED	SMD5630
Ilość diod LED	300 diod LED (60 diod LED/metr)
Długość paska	16.4 ft (5 metry)
FPCB Board Width	10mm
Kolor światła	Ciepła biel
Temperatura barwowa	2700K-3000K
Lumen per LED	23-25 lm/LED
Objętość roboczatage	Prąd stały 12 V
Zalecany zasilacz	DC 12V 3A (36W) or higher
Cotage	30 watów
Poziom wodoodporności	IP30 (Non-Waterproof)
Temperatura pracy	-20°C do 50°C
Długość życia	>50,000 godzin
Certyfikaty	CE i RoHS

Instrukcje konfiguracji

Przygotuj powierzchnię: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
Obraz: Zbliżenie view of the LED strip, highlighting individual SMD5630 LEDs and designated cut points marked with a scissor icon. The strip also shows the adhesive backing being peeled.
Zmierz i tnij (opcjonalnie): If a shorter length is required, cut the LED strip only at the designated cut marks (usually indicated by a scissor icon and copper pads). Cutting elsewhere will damage the circuit and prevent the section from lighting up.
Podłącz zasilanie:
- Identify the 2-pin connectors on the LED strip.
- Connect the LED strip's 2-pin connector to a compatible DC 12V power adapter (not included). Ensure polarity is correct (positive to positive, negative to negative).
- If a remote control is included, connect the LED strip to the remote controller, and then connect the controller to the power adapter.
Image: Two separate sections of the LED strip, each terminating with a 2-pin connector (red and black wires), ready for connection to a power source or controller.
Test Before Adhering: Before removing the adhesive backing, plug in the power adapter to test if the LED strip lights up correctly. This allows for troubleshooting before permanent installation.
Przyklej pasek: Once tested, peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the desired clean, dry surface. Apply firm, even pressure along the entire length to ensure good adhesion.

Instrukcja obsługi

Once the LED strip is properly installed and connected to a 12V DC power supply:

Włączanie/wyłączanie: Plug the power adapter into a wall outlet to turn the strip light on. Unplug it to turn it off.
Using the Remote Control (if applicable): If your package included a remote control, refer to its specific instructions for functions such as brightness adjustment or on/off control.

Examples of warm white LED strip lighting in various indoor settings

Obraz: Wizualizacjaamples of LED strip lighting used in different indoor environments, demonstrating the warm white illumination. This image also shows Cool White and Nature White, but this product is Warm White.

Konserwacja

Czyszczenie: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Kontrola: Periodically check the strip for any signs of damage, loose connections, or adhesive degradation.
Składowanie: If storing the LED strip, ensure it is kept in a dry, cool place, away from direct sunlight and extreme temperatures.

Rozwiązywanie problemów

Problem	Możliwa przyczyna	Rozwiązanie
Taśma LED nie świeci.	Brak zasilania adaptera. Incorrect power connection (polarity reversed). Wadliwy zasilacz. Damaged LED strip. Remote control battery dead or not paired (if applicable).	Check wall outlet and power adapter connection. Ensure positive (+) and negative (-) connections are correct. Test with a known working 12V DC power adapter. Inspect the strip for visible damage, especially at cut points. Replace remote battery or re-pair according to remote instructions.
Part of the LED strip is not lighting up.	Uszkodzenie fragmentu paska. Incorrect cutting.	Inspect the unlit section for physical damage or a broken circuit. Ensure cuts were made only at designated marks. Damaged sections cannot be repaired.
Diody LED świecą słabo lub migoczą.	Niewystarczające zasilanie. Luźne połączenie.	Upewnij się, że zasilacz zapewnia wystarczającą moc.tage (minimum 30W for this strip). Sprawdź, czy wszystkie połączenia są dobrze zamocowane.

Gwarancja i wsparcie

BTF-LIGHTING products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please contact BTF-LIGHTING customer service through the retailer where the product was purchased or visit the official BTF-LIGHTING webstrona.

Please have your model number (56305MWW60W30) and purchase details ready when contacting support.

BTF-LIGHTING 56305MWW60W30