Ważne informacje dotyczące bezpieczeństwa
Przed montażem i użytkowaniem produktu prosimy o dokładne zapoznanie się z instrukcją. Nieprzestrzeganie tych instrukcji może spowodować obrażenia ciała lub uszkodzenia.
- Always ensure the umbrella base is properly weighted and stable before opening the canopy.
- Do not use the umbrella in strong winds or severe weather conditions. Close and secure the canopy to prevent damage or injury.
- Aby uniknąć wypadków, podczas korzystania z parasola należy trzymać dzieci i zwierzęta domowe z dala od niego.
- Regularly inspect all parts for wear, damage, or loose connections. Replace damaged parts immediately.
- Do not hang objects from the umbrella frame or canopy.
Zawartość opakowania
Przed rozpoczęciem montażu należy sprawdzić, czy wszystkie elementy są obecne:
- Umbrella Canopy (Sunbrella Henna)
- Offset Umbrella Frame (Steel)
- Podstawa parasola
- Korba
- Sprzęt montażowy
Instrukcje konfiguracji
Krok 1: Złóż podstawę
Place the umbrella base in the desired location on a flat, stable surface. Ensure the base is filled with sand or water as per manufacturer recommendations to provide adequate stability. The base is designed to be filled for optimal performance.

Image: The square umbrella base with a central pole receiver.
Step 2: Attach the Umbrella Frame
Insert the main pole of the umbrella frame into the receiver on the assembled base. Secure it firmly using the provided hardware (e.g., tightening knob or bolts) to ensure a stable connection.
Krok 3: Zabezpiecz baldachim
Ensure the canopy is properly attached to the frame's arms. The LED lights are integrated into the canopy and will draw power from a solar panel located at the top of the umbrella. Allow the solar panel to charge in direct sunlight for a full day before expecting the lights to function.
Instrukcja obsługi
Otwieranie parasola
Locate the crank handle on the umbrella pole. Turn the crank handle clockwise to extend the canopy. Continue cranking until the canopy is fully open and taut. Do not over-crank.

Image: Close-up of the umbrella's crank lift mechanism and curved support arm.
Regulacja parasola
This offset umbrella features a manual tilt mechanism and can be rotated. To tilt the canopy, locate the tilt adjustment lever or button on the frame and adjust to the desired angle. To rotate the umbrella, loosen the rotation lock (if present) and carefully pivot the canopy to the desired position, then re-secure the lock.
Closing and Securing the Umbrella
Turn the crank handle counter-clockwise to retract the canopy. Once fully closed, wrap the attached securing strap around the folded canopy and fasten it to prevent the umbrella from opening unexpectedly or being caught by wind.
Konserwacja
Czyszczenie
- Canopy (Sunbrella Fabric): Clean with mild soap and lukewarm water. Use a soft brush to remove dirt. Rinse thoroughly and allow to air dry completely before folding or storing. Do not use harsh chemicals or bleach.
- Rama: Wytrzyj stalową ramę wodąamp szmatką i łagodnym mydłem. Dokładnie wysuszyć, aby zapobiec rdzewieniu.
Składowanie
When not in use for extended periods or during inclement weather, close and secure the umbrella. For long-term storage, consider using a protective cover or storing the umbrella indoors in a dry, sheltered area to prolong its lifespan.
Rozwiązywanie problemów
- Parasol nie otwiera się/nie zamyka płynnie: Check for any obstructions in the mechanism or canopy fabric. Apply a silicone-based lubricant to moving parts if necessary.
- Umbrella unstable: Ensure the base is adequately weighted with sand or water. Verify all connections between the frame and base are tight.
- Światła LED nie działają: Ensure the solar panel has received sufficient direct sunlight to charge. Check for any debris covering the solar panel.
Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Marka | Hampton zatoki |
| Numer modelu | YJAF052-C |
| Średnica baldachimu | 11 stóp |
| Materiał zadaszenia | Sunbrella Fabric |
| Materiał ramy | Stal |
| Materiał wału | Stal |
| Mechanizm otwierania | Podnośnik korbowy |
| Mechanizm przechylania | Ręczne przechylenie |
| Cechy specjalne | Zintegrowane światła LED |
| Zawarte komponenty | Opierać |
| Przybliżona waga przedmiotu | 0.69 Kilograms (Please verify actual product weight upon receipt) |
Gwarancja i wsparcie
ten Hampton Bay product is covered by the manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or contact Hampton Bay customer service directly. Keep your proof of purchase for warranty purposes.