iSpring FM25B
iSpring FM25B Whole House Iron & Manganese Reducing Water Filter Cartridge User Manual
Model: FM25B
Wstęp
This manual provides instructions for the iSpring FM25B Whole House Iron & Manganese Reducing Water Filter Cartridge. The FM25B is designed to reduce iron and manganese in your water supply, improving water quality and protecting your plumbing and appliances. It is compatible with iSpring whole house water filter systems, specifically models WGB32BM and WGB22BM.

Image: The iSpring FM25B filter cartridge, highlighting its effectiveness in reducing iron (up to 3.0 ppm) and manganese (up to 1.0 ppm) to 0.01 ppm.
Konfiguracja i instalacja
The FM25B filter cartridge is intended for use within iSpring whole house water filter systems like the WGB32BM and WGB22BM. For optimal performance and to extend the lifespan of this filter, it is recommended to install the FM25B Po a sediment filter and/or a water softener.

Image: Illustration of iSpring WGB32BM and WGB22BM whole house filter systems, indicating where the FM25B filter is typically placed.

Image: A diagram illustrating the recommended installation order: sediment filter, water softener, then the FM25B filter. This setup helps prevent sediment and hard water from impacting the FM25B's lifespan.
Instrukcja wideo instalacji
For a comprehensive guide on installing an iSpring whole house water filtration system, please refer to the official installation video below. This video demonstrates the general process which applies to systems compatible with the FM25B cartridge.
Video: Official iSpring Whole House Water Filtration System Installation Guide. This video provides visual instructions for setting up your whole house water filter system.
Zasady działania
The iSpring FM25B filter utilizes catalytic media to effectively reduce iron and manganese from your water. This process does not consume the media, contributing to a longer filter life compared to traditional greensand filters.
- Redukcja żelaza: Reduces iron levels from a maximum of 3.0 ppm down to 0.01 ppm.
- Manganese Reduction: Reduces manganese levels from a maximum of 1.0 ppm down to 0.01 ppm.
- Przepływ: Designed for high flow rates with a very low pressure drop. Expect up to a 5 psi drop at a flow rate of 8 gallons per minute (gpm).
- Warunki pracy: Stable performance within a pH range of 5.8 - 8.6 and a temperature range of 40 - 113°F (4.4 - 45°C).

Image: Clear water flowing from a faucet, illustrating the benefit of filtered water.
Konserwacja
Regular maintenance, primarily filter replacement, is crucial for ensuring the continued effectiveness of your iSpring FM25B filter cartridge.
- Żywotność filtra: The FM25B filter typically lasts up to 50,000 gallons when treating water with a 3.0 ppm iron level, or approximately 12 months based on 200 gallons per day (GPD) usage. Actual lifespan may vary depending on water quality and usage.
- Wymiana: Replace the filter cartridge when you notice a decrease in water flow or a return of iron/manganese symptoms (e.g., reddish-brown stains, metallic taste).

Image: A hand demonstrating the process of inserting a new filter cartridge into a water filter housing.
Rozwiązywanie problemów
If you experience issues such as reduced water flow, persistent iron or manganese discoloration, or unusual tastes/odors after installing the FM25B filter, consider the following:
- Zmniejszony przepływ: This often indicates a clogged filter. Check if it's time for a replacement based on the recommended lifespan or if your water has unusually high sediment levels.
- Iron/Manganese Symptoms Persist: Ensure the filter was installed correctly and that your water's iron/manganese levels are within the filter's capacity. Very high concentrations might require additional pre-treatment.
- Wycieki: Check all connections for proper sealing. Ensure O-rings are correctly seated and lubricated.
Aby uzyskać dalszą pomoc, zapoznaj się z sekcją Pomoc.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | FM25B |
| Wymiary produktu | 6"D x 22"W x 6"H (4.5" x 20" cartridge size) |
| Waga przedmiotu | 8 funtów |
| Tworzywo | Iron (referring to the reduction capability, not the filter material itself) |
| Zalety produktu | Removes Iron and Manganese |
| Iron Reduction Capacity | MAX 3.0 ppm down to 0.01 ppm |
| Manganese Reduction Capacity | MAX 1.0 ppm down to 0.01 ppm |
| Ciśnienie wody zasilającej | 20 - 100 psi |
| Pressure Impact | Up to 5 psi drop at 8 gpm flow rate |
| Zakres pH | 5.8-8.6 |
| Zakres temperatur | 40 - 113°F (4.4 - 45°C) |
| Żywotność filtra | 50,000 gallons at 3.0 ppm iron level, or approx. 12 months @ 200 GPD |
| Certyfikacja testów zewnętrznych | ANSI (tested by independent third party against NSF/ANSI standards) |
| Kompatybilne systemy | iSpring WGB22BM, iSpring WGB32BM |
| UPC | 662425080076 |
Gwarancja i wsparcie
iSpring is committed to providing high-quality products and excellent customer service. The FM25B filter is manufactured to comply strictly with FDA standards and is tested by an independent third party against NSF/ANSI standards for water quality, material safety, and structural integrity.
We offer lifetime free technical support from our U.S. local support team. If you encounter any problems with your water filter or have questions, please do not hesitate to reach out to us immediately. We are dedicated to helping you find solutions.

Image: A customer service representative wearing a headset, symbolizing readily available support for any inquiries.

Image: A flowchart illustrating the customer support process, from identifying an issue to receiving a solution.
For support, please visit the official iSpring website or contact their customer service directly. You can find contact information on the product packaging or the iSpring webstrona.
Powiązane dokumenty - FM25B
![]() |
iSpring WSP Series User Manual User manual for the iSpring WSP Series reusable spin-down sediment water filter systems, covering overview, installation, and maintenance. |
![]() |
iSpring WSP Series User Manual: Installation, Operation, and Maintenance Comprehensive user manual for the iSpring WSP Series whole house sediment water filter systems, including installation instructions, operation details, maintenance guidelines, specifications, and warranty information. Covers WSP and WSP-SL models. |
![]() |
iSpring Whole House Filter Replacement Instructions and Filter Schedule Comprehensive guide for replacing iSpring whole house water filter cartridges, detailing step-by-step instructions, sanitization procedures, and a detailed filter replacement schedule for various iSpring models. |
![]() |
iSpring Whole House Water Filtration and UV Filter Systems: Installation and User Manual Comprehensive user and installation manual for iSpring WGB32B 3-Stage Whole House Water Filtration System and iSpring UVF55FS Whole House UV Water Filter. Covers product specifications, installation steps, maintenance, troubleshooting, and warranty information. |
![]() |
iSpring WGB & WDS Series Heavy Duty Water Filtration Systems Installation & User Manual Comprehensive installation, maintenance, and troubleshooting guide for iSpring WGB and WDS series heavy-duty water filtration systems. Learn how to install, replace filters, and optimize performance. |
![]() |
iSpring WGB32B Series Heavy Duty Water Filtration Systems Installation Instructions & User Manual This manual provides comprehensive installation, operation, and maintenance instructions for the iSpring WGB32B Series Heavy Duty Water Filtration Systems. It covers product overview, specifications, component lists, tools needed, installation steps, maintenance, troubleshooting, FAQs, and warranty information. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.





