PDP Afterglow Wireless Controller for PS3

Wstęp

Thank you for choosing the PDP Afterglow Wireless Controller. This controller is designed to enhance your gaming experience on the PlayStation 3 and is also compatible with Windows 7 and up on PC. It features a distinctive clear polycarbonate housing with signature Afterglow blue lighting, custom-engineered SmartTrack technology for precise analog stick control, and upgraded L1/R1 and L2/R2 buttons with swappable functions. This manual provides essential information for setting up, operating, and maintaining your controller.

Obraz: Przód view of the PDP Afterglow Wireless Controller, showcasing its clear blue illuminated design.

Zawartość opakowania

Sprawdź zawartość paczki, aby upewnić się, że znajdują się w niej wszystkie elementy:

• 1 x PDP Afterglow Wireless Controller
• 1 x USB Wireless Receiver Dongle
• 1 x Instrukcja obsługi (ten dokument)

Notatka: Do działania urządzenia wymagane są 2 baterie AA, które nie są dołączone do zestawu.

Organizować coś

1. Zainstaluj baterie: Open the battery compartment on the back of the controller. Insert two (2) AA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
2. Podłącz odbiornik bezprzewodowy USB:
   • For PlayStation 3: Plug the USB wireless receiver dongle into an available USB port on your PlayStation 3 console.
   • Dla komputera: Plug the USB wireless receiver dongle into an available USB port on your PC. Ensure your PC is running Windows 7 or a newer version.
3. Parowanie kontrolera:

   Once the USB receiver is connected, turn on your controller. The controller should automatically pair with the receiver. The blue LED lights on the controller will indicate a successful connection. If the controller does not connect automatically, ensure the receiver is properly inserted and the controller has fresh batteries. You may need to briefly remove and re-insert the USB receiver.

Image: Illustration demonstrating how to connect the USB wireless receiver to a PlayStation 3 console or PC.

Instrukcja obsługi

Układ kontrolera

Image: Detailed diagram illustrating the button layout and labels of the PDP Afterglow Wireless Controller.

• Left Stick / Right Stick: Do sterowania ruchem i kamerą.
• Pad kierunkowy: Do precyzyjnego wprowadzania kierunku.
• Face Buttons (Triangle, Circle, Cross, Square): Standardowe przyciski akcji.
• Left Bumper (L1) / Right Bumper (R1): Guziki na ramionach.
• Left Trigger (L2) / Right Trigger (R2): Wyzwalacze analogowe dla zmiennych danych wejściowych.
• Select / Start Buttons: Game-specific functions.
• Przycisk Home: Access the PlayStation 3 XMB menu or PC game menu.

Afterglow Button Functionality

The Afterglow button, located on the back of the controller, allows you to swap the functions of the L1/R1 and L2/R2 buttons. To activate this feature, press and hold the Afterglow button. This can be useful for customizing your control scheme based on game preferences.

Sterowanie oświetleniem LED

The signature blue LED lighting can be toggled on or off. To control the lighting, locate the dedicated button on the back of the controller. Pressing this button will cycle the LED lights between on and off states.

Zarządzanie energią

To conserve battery life, the controller is designed to automatically shut down after approximately 2 minutes of inactivity. To reactivate the controller, press any button. The controller cannot be used to power on the PlayStation 3 console; the console must be turned on manually.

Uwagi dotyczące zgodności

This controller is specifically designed for PlayStation 3 games and PC games (Windows 7 and up). It is not compatible with PlayStation 2 games, even if played on a backwards-compatible PlayStation 3 console.

Konserwacja

• Wymiana baterii: Replace AA batteries when the controller's performance diminishes or the LED lights dim. Always use fresh batteries and dispose of old batteries responsibly.
• Czyszczenie: Do czyszczenia kontrolera należy używać miękkiej, suchej ściereczki. W przypadku uporczywych zabrudzeń należy użyć delikatnej ściereczki.amp cloth can be used, but ensure no moisture enters the controller's internal components. Avoid using harsh chemicals or abrasive cleaners.
• Składowanie: Przechowuj kontroler w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur, jeśli nie będziesz go używać przez dłuższy czas.

Rozwiązywanie problemów

Kontroler się nie włącza:

Ensure fresh AA batteries are correctly installed with proper polarity. Check the battery compartment for any obstructions.

Controller does not connect or pair:

• Verify the USB wireless receiver dongle is securely plugged into an active USB port on your console or PC.
• Try unplugging and re-plugging the USB receiver.
• Ensure the controller has fresh batteries.
• Move the controller closer to the USB receiver to rule out range issues.

Buttons or analog sticks are unresponsive or sticking:

Ensure the controller is clean and free from debris around the buttons and sticks. Avoid excessive force during use. If the issue persists, contact customer support.

Diody LED nie świecą:

Check if the LED lighting feature has been toggled off using the dedicated button on the back of the controller. Ensure batteries are not depleted.

Controller does not turn on the PlayStation 3 console:

This is expected behavior. The PlayStation 3 console must be powered on manually.

Controller does not work with PlayStation 2 games:

This controller is not designed for PlayStation 2 games. It is compatible with PlayStation 3 and PC (Windows 7 and up) titles only.

Specyfikacje

Image: The PDP Afterglow Wireless Controller with its key dimensions (length, width, height) indicated.

Gwarancja i wsparcie

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official PDP webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

Wsparcie online: Odwiedź sklep PDP na Amazon