Pan Beams MB720

Mr. Beams MB720 LED Motion Sensor Light User Manual

Model: MB720 | Brand: Mr Beams

Wstęp

The Mr. Beams MB720 LED Motion Sensor Light is a versatile, battery-operated light designed for various indoor and outdoor applications. It provides 20 lumens of brightness and features a motion sensor for automatic illumination. Its waterproof design allows for flexible placement, making it an ideal solution for illuminating pathways, steps, or small areas where light is needed only when motion is detected.

Informacje dotyczące bezpieczeństwa

Przed użyciem produktu należy przeczytać wszystkie instrukcje bezpieczeństwa. Nieprzestrzeganie tych instrukcji może spowodować porażenie prądem, pożar lub poważne obrażenia.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

Konfiguracja i instalacja

Instalacja baterii

The MB720 light requires 4 x AA batteries (sold separately) for operation.

  1. Znajdź komorę baterii z tyłu lub na spodzie jednostki świetlnej.
  2. Otwórz pokrywę komory baterii.
  3. Włóż 4 baterie AA, zwracając uwagę na prawidłową biegunowość (+ i -), zgodnie ze wskazaniami wewnątrz komory.
  4. Close the battery compartment cover securely to ensure the waterproof seal is maintained.

Umieszczenie

This light is designed to stand on its own on a flat surface or can be mounted. Its IPX4 waterproof rating makes it suitable for both indoor and outdoor environments.

Mr. Beams MB720 LED Motion Sensor Light, front view

Rycina 1: Przód view of the Mr. Beams MB720 LED Motion Sensor Light, showing the motion sensor at the top.

Diagram showing dimensions of Mr. Beams MB720 light

Figure 2: Dimensions of the MB720 light, approximately 3.9 x 3.3 x 1.2 inches (10 x 8.5 x 3 cm).

Diagram highlighting features of Mr. Beams MB720 light

Figure 3: Key features of the MB720 light, including motion sensor, 20 lumens brightness, 1m² irradiation area, 30-second auto-off, and battery compartment.

Działanie

Automatyczna aktywacja

The Mr. Beams MB720 light is designed for fully automatic operation, utilizing both a light sensor and a motion sensor.

Jasność

The light provides 20 lumens of brightness, which is suitable for accent lighting, illuminating steps, or providing a low level of ambient light in dark areas.

Examples of Mr. Beams MB720 light usage in a bathroom, near a toilet, and on steps

Figure 4: Recommended usage scenarios for the MB720 light, including under sinks, near toilets, and on stairs for foot lighting.

Konserwacja

Wymiana baterii

When the light begins to dim, flickers, or fails to activate, it is likely time to replace the batteries. Refer to the 'Battery Installation' steps in the Setup section.

Czyszczenie

To clean the exterior of the light, gently wipe it with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.

Rozwiązywanie problemów

If you encounter issues with your Mr. Beams MB720 light, please refer to the table below for common problems and solutions.

ProblemMożliwa przyczynaRozwiązanie
Światło się nie włącza.Insufficient darkness.Ensure the light is in a sufficiently dark environment for the light sensor to activate.
Światło się nie włącza.Rozładowane lub nieprawidłowo zainstalowane baterie.Replace batteries with new AA batteries, ensuring correct polarity (+/-).
Światło się nie włącza.Czujnik ruchu jest zasłonięty lub znajduje się poza zasięgiem.Usuń wszelkie przeszkody z czujnika view. Ensure motion occurs within 14.8 ft (4.5 m) of the sensor.
Światło świeci się cały czas.Wykryto ciągły ruch.Ensure there is no continuous motion in the sensor's field of view.
Światło świeci się cały czas.Awaria czujnika.Remove batteries for 60 seconds, then reinsert to reset the unit. If the problem persists, contact customer support.

Specyfikacje

Detailed technical specifications for the Mr. Beams MB720 LED Motion Sensor Light:

FunkcjaSzczegół
Numer modeluMB720
MarkaPanie Beams
Wymiary (dł. x szer. x wys.)Około. 3.9 x 3.3 x 1.2 cali (10 x 8.5 x 3 cm)
WagaApprox. 0.4 lbs (0.135 kg) / 4.8 ounces
TworzywoABS Resin / Acrylonitrile Butadiene Styrene
Strumień świetlny20 lumenów
Obszar napromieniowania1 m²
Czujnik ruchuTak
Max Sensing Distance14.8 stóp (4.5 metry)
Czas automatycznego wyłączenia30 seconds after motion ceases
Wymagane baterie4 x AA batteries (sold separately)
Szacowana żywotność baterii12 months (varies with usage frequency)
Życie diody LEDOkoło 30,000 godzin
Stopień wodoodpornościIPX4
Czujnik światłaBuilt-in (activates only after dark)
Zastosowanie wewnątrz/na zewnątrzPlenerowy
Źródło zasilaniaZasilany bateryjnie

Gwarancja i wsparcie

For warranty information, technical support, or to inquire about replacement parts, please contact Mr. Beams customer service. Refer to the product packaging or the official Mr. Beams webna naszej stronie znajdziesz najnowsze dane kontaktowe.

Data pierwszej dostępności: 21 września 2015 r.