Astrapool Ultra 125

AstralPool Ultra 125 Robotic Pool Cleaner User Manual

Model: Ultra 125

1. Wprowadzenie

Thank you for choosing the AstralPool Ultra 125 Robotic Pool Cleaner. This advanced automatic cleaner is designed to efficiently clean the bottom, walls, and waterline of public swimming pools up to 15 meters in length. Featuring a Gyro intelligent navigation system and powerful brushless DC motors, the Ultra 125 ensures thorough cleaning and superior performance. Please read this manual carefully before operating your device to ensure proper use and maintenance.

AstralPool Ultra 125 Robotic Pool Cleaner

Figure 1: AstralPool Ultra 125 Robotic Pool Cleaner. This image shows the compact design of the cleaner, ready for deployment in a pool.

2. Konfiguracja

Follow these steps to prepare your AstralPool Ultra 125 for its first use.

  1. Rozpakowywanie: Carefully remove the cleaner and all accessories from the packaging. Ensure all components are present: the cleaner unit, power supply unit, and cable.
  2. Umiejscowienie zasilacza: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool. Ensure it is in a shaded area and protected from direct sunlight and splashing water. Do not immerse the power supply unit in water.
  3. Połączenie kablowe: Podłącz kabel pływający od odkurzacza do zasilacza. Upewnij się, że połączenie jest stabilne.
  4. Umieszczanie odkurzacza w basenie: Gently lower the cleaner into the pool. Hold the handle and allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the cleaner. The cleaner will sink naturally.
  5. Włączanie: Podłącz zasilacz do uziemionego gniazdka elektrycznego.
Placing the AstralPool Ultra 125 in the pool

Figure 2: Proper placement of the cleaner into the pool. Lower the unit gently to avoid tangling the cable.

3. Instrukcja obsługi

The AstralPool Ultra 125 is designed for simple operation.

  1. Rozpoczęcie cyklu czyszczenia: Once the cleaner is in the pool and the power supply is connected, press the ON/OFF button on the power supply unit. The cleaner will begin its cleaning cycle automatically.
  2. Cykl czyszczenia: The cleaner operates on a fixed 3-hour cleaning cycle, during which it systematically cleans the pool floor, walls, and waterline. The Gyro intelligent navigation system optimizes the cleaning path for maximum coverage and efficiency.
  3. Operacja monitorowania: Observe the cleaner's movement. It should move across the pool surfaces, climbing walls to clean the waterline.
  4. Zakończenie cyklu: After approximately 3 hours, the cleaner will automatically shut off.
  5. Usuwanie środka czyszczącego: Disconnect the power supply from the electrical outlet. Gently pull the floating cable to bring the cleaner to the surface. Use the handle to lift the cleaner out of the water. Allow excess water to drain from the cleaner before placing it on the pool deck. Do not pull the cleaner out of the water by its cable.

4. Konserwacja

Regular maintenance ensures optimal performance and extends the lifespan of your AstralPool Ultra 125.

  • Czyszczenie worka filtrującego: After each cleaning cycle, or as needed, remove and clean the ultrafine filter bag.
    1. Open the cleaner's filter compartment (refer to your cleaner's specific design for access).
    2. Wyjmij worek filtrujący.
    3. Rinse the filter bag thoroughly with a garden hose until all debris is removed.
    4. Ensure the filter bag is completely clean before reinserting it into the cleaner. A clogged filter will reduce cleaning efficiency.
  • Kontrola kabla: Periodically inspect the 23-meter floating cable for any signs of damage, kinks, or wear. If damage is found, contact authorized service personnel.
  • Kontrola wirnika: Occasionally check the impeller for any trapped debris that might obstruct water flow.
  • Składowanie: When not in use for extended periods, clean the cleaner thoroughly, ensure the filter bag is dry, and store the unit in a cool, dry, shaded area, away from direct sunlight and extreme temperatures.
Cleaning the filter bag of the AstralPool Ultra 125

Figure 3: Illustrative image of filter bag cleaning. Regular cleaning of the ultrafine filter bag is crucial for maintaining suction power.

5. Rozwiązywanie Problemów

This section addresses common issues you might encounter with your AstralPool Ultra 125.

ProblemMożliwa przyczynaRozwiązanie
Cleaner does not move or start.
  • Power supply not connected or switched off.
  • Cable not properly connected to power supply.
  • Electrical outlet issue.
  • Ensure power supply is plugged in and ON.
  • Check cable connection at both ends.
  • Sprawdź gniazdko za pomocą innego urządzenia.
Poor cleaning performance or missed areas.
  • Clogged filter bag.
  • Zanieczyszczenia w wirniku.
  • Improper water chemistry (e.g., excessive algae).
  • Clean the ultrafine filter bag thoroughly.
  • Inspect and clear any debris from the impeller.
  • Balance pool water chemistry.
Cleaner does not climb walls or clean waterline effectively.
  • Clogged filter bag.
  • Excessive air in the cleaner.
  • Slippery pool surfaces (e.g., heavy algae build-up).
  • Clean the ultrafine filter bag.
  • Ensure cleaner is fully submerged and air-free before starting.
  • Brush pool walls manually to remove algae before using the cleaner.
Cable tangles during operation.
  • Improper cable deployment.
  • Cleaner operating in a very small or irregularly shaped pool.
  • Ensure the cable is fully extended and free of kinks before placing the cleaner.
  • Periodically straighten the cable.

6. Specyfikacje

FunkcjaSzczegół
ModelUltra 125
MarkaAstrapool
Typ basenuPublic pools
Maximum Pool Length15 metrów
Zakres czyszczeniaFloor, Walls, Waterline
Czas trwania cyklu czyszczenia3 godziny
Długość kabla23 metrów
Typ silnikaBrushless DC (1 pump motor, 1 traction motor)
Pump Suction Flow16.4 m³/godz.
System nawigacyjnyGyro Intelligent Navigation
Typ filtraUltrafine Bag Filter
Wymiary opakowaniaWymiary 54.5 x 51 x 37.7 cm
Waga paczki14.11 kilogramów
Numer referencyjny producenta60165
ASINB00WRCTZPK

7. Gwarancja i wsparcie

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Astrapool website. For technical support, spare parts, or service inquiries, please contact your authorized Astrapool dealer or customer service department. Keep your purchase receipt as proof of purchase for warranty claims.

© 2024 Astrapool. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.