Produkt ponadview
The KränzleUSA K 1122TST is a robust cold water electric pressure washer designed for commercial applications. It features an advanced Kränzle pump engineered for multi-hour bypass and run-dry capability, significantly reducing the risk of accidental pump damage. This unit includes a Dirt Killer turbo nozzle for enhanced cleaning efficiency and an auto on/off control at the gun jet to minimize wear and tear on the pump. It comes equipped with a 50-foot wire braided hose on a hose reel with safety couplers for convenience and safety. The TEFC 1600 RPM electric 110V, 15A motor with GFI allows for versatile power connection.

Image: KränzleUSA K 1122TST Cold Water Electric Pressure Washer, showcasing its compact design, hose reel, and nozzle storage.
Ważne informacje dotyczące bezpieczeństwa
- Always read and understand the entire manual before operating the pressure washer.
- Należy nosić odpowiedni sprzęt ochrony osobistej (PPE), obejmujący ochronę oczu i słuchu.
- Ensure the pressure washer is connected to a properly grounded 110V, 15A electrical outlet with GFI protection.
- Never point the spray gun at people, pets, or electrical components.
- Do not operate the pressure washer in an enclosed area without proper ventilation.
- Przed przystąpieniem do czynności konserwacyjnych lub czyszczenia należy odłączyć zasilanie.
Kluczowe komponenty
- Kränzle Pump: Advanced design for multi-hour bypass and run-dry capability.
- Dirt Killer Turbo Nozzle: Enhances cleaning efficiency.
- Gun Jet with Auto On/Off: Reduces wear and tear on the pump.
- Peszel: Integrated with 50-feet wire braided hose and safety couplers.
- TEFC Electric Motor: 1600 RPM, 110V, 15A with GFI.
- Ciśnieniomierz: Displays operating pressure.
- Integrated Cart: Dla łatwej mobilności.
Przewodnik po konfiguracji
1. Rozpakowywanie
Carefully remove the pressure washer and all accessories from the packaging. Inspect for any shipping damage. Retain packaging for future storage or transport.
2. Montaż
- Ensure all components are securely attached. The unit is largely pre-assembled.
- Confirm the hose reel is properly mounted and the 50-foot hose is correctly routed and connected.
3. Connecting Water and Power
- Connect a standard garden hose (not included) to the water inlet of the pressure washer. Ensure the water supply is clean and free of debris.
- Connect the high-pressure hose from the machine to the gun jet. Ensure safety couplers are securely fastened.
- Plug the pressure washer's power cord into a grounded 110V, 15A electrical outlet with GFI protection.
- Turn on the water supply completely before starting the machine.
Instrukcja obsługi
1. Uruchomienie myjki ciśnieniowej
- Upewnij się, że dopływ wody jest całkowicie otwarty i przewód zasilający jest podłączony.
- Squeeze the trigger on the gun jet to purge air from the system until a steady stream of water emerges.
- Turn the main power switch on the pressure washer to the 'ON' position. The pump will start when the trigger is squeezed and stop when released (auto on/off feature).
2. Using the Nozzles
- Select the appropriate nozzle for your cleaning task. The Dirt Killer turbo nozzle provides an oscillating jet for aggressive cleaning.
- Always test the spray pattern and pressure on an inconspicuous area first.
- Aby uniknąć uszkodzeń, zachowaj bezpieczną odległość od czyszczonej powierzchni.
3. Wyłączanie
- Turn the main power switch to the 'OFF' position.
- Zakręć dopływ wody.
- Squeeze the trigger on the gun jet to release any remaining pressure in the system.
- Odłącz przewód zasilający od gniazdka.
Konserwacja
1. Regularne czyszczenie
- After each use, flush the pump with clean water to remove any detergent or debris.
- Wyczyść zewnętrzną część urządzenia za pomocą adamp płótno.
- Inspect the high-pressure hose, gun, and nozzles for wear or damage. Replace if necessary.
2. Przechowywanie
- Przechowuj myjkę ciśnieniową w suchym i chronionym przed mrozem pomieszczeniu.
- If storing for an extended period, consider using a pump protector or antifreeze solution to prevent freezing and corrosion.
- Coil the high-pressure hose neatly on the hose reel.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brak ciśnienia lub niskie ciśnienie | Niewystarczające zaopatrzenie w wodę; Powietrze w pompie; Zatkana dysza; Zagięty wąż | Ensure full water flow; Purge air by squeezing trigger; Clean or replace nozzle; Straighten hose |
| Silnik nie uruchamia się | No power; GFI tripped; Thermal overload | Check power connection; Reset GFI; Allow motor to cool down |
| Wycieki wody | Luźne połączenia; uszkodzone pierścienie uszczelniające lub uszczelki | Tighten all connections; Inspect and replace O-rings/seals |
Dane techniczne
| Specyfikacja | Wartość |
|---|---|
| Marka | Kränzle |
| Numer modelu | K 1122TST |
| Źródło zasilania | Elektryczny przewodowy |
| Kolor | Niebieski |
| Maksymalne ciśnienie | 1400 PSI |
| Długość węża | 50 stóp |
| Maksymalna szybkość przepływu | 2.1 GPM |
| Silnik | TEFC 1600 RPM Electric 110V, 15A with GFI |
| Wymiary produktu | 17 x 13 x 40 cala |
| Waga produktu | 80 funtów |
| UPC | 857735005011 |
Gwarancja i wsparcie
KränzleUSA products are built to high standards and come with a manufacturer's warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included with your product or visit the official KränzleUSA website. For service or parts, contact an authorized KränzleUSA service center.
For further assistance, please contact KränzleUSA customer support.