Wstęp
Dziękujemy za zakupasing the Amazon Basics Ni-MH AA/AAA Battery Charger with USB Output. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new charger. Please read this manual thoroughly before use and retain it for future reference.
Informacje dotyczące bezpieczeństwa
- Use only with Ni-MH AA/AAA rechargeable batteries. Do not attempt to charge other battery types (e.g., alkaline, Ni-Cd, Li-ion) as this may cause explosion, rupture, or leakage, leading to personal injury or property damage.
- Do not charge 1 or 3 batteries. This charger is designed to charge batteries in pairs (2 or 4 batteries simultaneously).
- Ensure correct battery polarity (+/-) when inserting batteries. Insert the negative (-) terminal first, then gently press down the positive (+) terminal to secure the battery and protect the contacts.
- Do not expose the charger to rain or moisture. Use indoors only.
- Nie rozmontowuj, nie modyfikuj ani nie próbuj naprawiać ładowarki. Wszelkie czynności serwisowe powierzaj wykwalifikowanemu personelowi.
- Przechowywać w miejscu niedostępnym dla dzieci.
- Odłączaj ładowarkę od gniazdka elektrycznego, gdy nie używasz jej lub przed czyszczeniem.
- Avoid charging batteries in extreme temperatures or direct sunlight.
Produkt ponadview
The Amazon Basics Ni-MH AA/AAA Battery Charger is designed for efficient and safe charging of your rechargeable batteries. It features multiple charging slots and a convenient USB output port.
Komponenty
- Battery Charging Slots (for AA/AAA Ni-MH batteries)
- USB Output Port (for charging USB-powered devices)
- Power Plug (EU standard)
- LED Indicators (for charging status)
Cechy
- 4-hour Ni-MH battery charger with USB port.
- Charges 2 or 4 AA/AAA Ni-MH rechargeable batteries simultaneously.
- Reverse polarity and overcharge protection for safe charging.
- Built-in switching power technology for worldwide use (100-240V AC input).

Rycina 1: Przód view of the Amazon Basics Ni-MH AA/AAA Battery Charger.

Rysunek 2: Tył view of the charger showing product label and EU plug.

Figure 3: Close-up of the USB output port located on the side of the charger.
Organizować coś
- Rozpakuj ładowarkę: Ostrożnie wyjmij ładowarkę z opakowania.
- Sprawdź, czy nie ma uszkodzeń: Sprawdź ładowarkę pod kątem widocznych uszkodzeń. Nie używaj jej, jeśli jest uszkodzona.
- Przygotuj baterie: Ensure the Ni-MH AA/AAA batteries you intend to charge are clean and free from corrosion.
Instrukcja obsługi
Ładowanie baterii
- Włóż baterie:
- Insert 2 or 4 AA/AAA Ni-MH rechargeable batteries into the charging slots.
- Ważny: When inserting batteries, always insert the negative (-) terminal first, then gently press down the positive (+) terminal to secure the battery and protect the contacts.
- If charging only 2 batteries, place them side-by-side in two adjacent slots (e.g., the two leftmost slots or the two rightmost slots). The charger cannot charge 1 or 3 batteries.
- Podłącz do zasilania: Plug the charger directly into a standard 100-240V AC wall outlet.
- Ładowanie monitora: The LED indicators will illuminate to show the charging status. Refer to the charger's specific LED behavior (e.g., red for charging, green for fully charged).
- Wyjmij baterie: Once charging is complete (indicated by the LEDs), unplug the charger from the wall outlet and remove the batteries.

Figure 4: Charger with AA batteries correctly inserted for charging.

Figure 5: Charger with AAA batteries correctly inserted for charging.
Korzystanie z portu wyjściowego USB
The charger features a USB output port that can be used to charge USB-powered devices (e.g., smartphones, tablets). This port provides 5.0V at 0.5A output.
- Podłącz ładowarkę do zasilania: Plug the battery charger into a standard 100-240V AC wall outlet.
- Podłącz urządzenie USB: Connect your USB-powered device to the USB output port on the charger using a compatible USB cable.
- Ładowanie: Your device will begin charging. Note that charging batteries and using the USB output simultaneously might affect charging speeds.

Figure 6: Charger plugged into a wall outlet with a USB cable connected to the USB output port.
Konserwacja
- Czyszczenie: Unplug the charger before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Składowanie: Przechowuj ładowarkę w chłodnym i suchym miejscu, z dala od bezpośredniego światła słonecznego i wilgoci, gdy nie jest używana.
- Styki baterii: Periodically check the battery contacts in the charging slots for dust or debris and clean if necessary to ensure proper connection.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Akumulatory się nie ładują. |
|
|
| USB device not charging. |
|
|
Specyfikacje
| Atrybut | Wartość |
|---|---|
| Numer modelu | V-3299USB-EU |
| Wejście Voltage | Prąd zmienny 100-240 V, 50/60 Hz |
| Typ baterii | Ni-MH AA/AAA rechargeable batteries |
| Wyjście ładowania akumulatora | AA: 2x (2.8V = 600mA), AAA: 2x (2.8V = 350mA) |
| Wyjście USB | 5.0V = 0.5A |
| Wymiary produktu (dł. x szer. x wys.) | 6.89 x 6.44 x 10.94 cm (2.71 x 2.54 x 4.31 cala) |
| Waga przedmiotu | 109 gramów (3.84 uncji) |
| Kolor | Czarny |
| Kraj pochodzenia | Chiny |

Figure 7: Dimensions of the Amazon Basics Battery Charger.
Gwarancja i wsparcie
For warranty information and customer support, please refer to the Amazon Basics official webOdwiedź witrynę lub skontaktuj się bezpośrednio z obsługą klienta Amazon. Zachowaj paragon zakupu na wypadek reklamacji.
Aby uzyskać dalszą pomoc, odwiedź stronę: Obsługa klienta Amazon