1. Wprowadzenie
This instruction manual provides essential information for the Bburago Ferrari F12 Berlinetta 1:24 scale die-cast model car. This model is a detailed replica designed for display and light play. Please read this manual carefully to ensure proper handling and care of your model.
1.1 Przeznaczenie
This product is intended as a collectible scale model and for recreational play. It is suitable for indoor use.
1.2 Ostrzeżenia dotyczące bezpieczeństwa
- Zalecany wiek: Suitable for ages 3 years and up. Contains small parts that may pose a choking hazard for children under 3 years.
- Avoid rough handling to prevent damage to the model or injury.
- Chronić przed ekstremalnymi temperaturami i bezpośrednim działaniem promieni słonecznych.
2. Koniec produktuview
The Bburago Ferrari F12 Berlinetta is a highly detailed 1:24 scale die-cast model. It features a metal body with plastic components, replicating the iconic Ferrari F12 Berlinetta from 2012.
2.1 Główne cechy
- Die-cast metal body with plastic parts.
- Opening doors, hood, and trunk (where applicable).
- Detailed interior and engine bay.
- Free-rolling wheels.

Obraz 2.1.1: Widok z góry na dół view of the model with the hood and doors open, showcasing szczegóły silnika i wnętrza.

Obraz 2.1.2: Tylna część trzy czwarte view of the model with the hood and doors open.

Obraz 2.1.3: Przód view of the Ferrari F12 Berlinetta model.

Obraz 2.1.4: Tył view of the Ferrari F12 Berlinetta model.

Obraz 2.1.5: Profesjonalizm bocznyfile view of the Ferrari F12 Berlinetta model.

Obraz 2.1.6: Widok z góry na dół view of the Ferrari F12 Berlinetta model.
3. Konfiguracja
3.1 Rozpakowywanie
- Carefully remove the model car from its packaging.
- Inspect the model for any visible damage or missing parts.
- Jeśli zajdzie taka potrzeba, zachowaj opakowanie w celu przyszłego przechowywania lub transportu.

Image 3.1.1: The model car in its traditional packaging.
3.2 Wstępna kontrola
Before use, ensure all movable parts (doors, hood, wheels) operate smoothly. If any part feels stiff, do not force it. Refer to the Troubleshooting section for guidance.
4. Obsługa
The Bburago Ferrari F12 Berlinetta model operates manually and does not require batteries or an external power source.
4.1 Opening Parts
- Drzwi: Gently lift the door handle area and pull the door outwards to open.
- Kaptur: Locate the small tab or seam at the front of the hood. Gently lift to open and reveal the engine bay.
- Pień: If applicable, locate the small tab or seam at the rear of the trunk. Gently lift to open.
Notatka: Always open and close movable parts with care to avoid damage to hinges or paintwork.
4.2 Rolling the Model
The model features free-rolling wheels. Simply place the car on a flat surface and push it gently to make it move. Avoid excessive force or rolling on rough surfaces to prevent damage to the wheels or axles.
5. Konserwacja
5.1 Czyszczenie
- To clean the model, use a soft, dry cloth to gently wipe away dust.
- W przypadku uporczywych plam delikatnieampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the paint or plastic components.
5.2 Przechowywanie
- Przechowuj model w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
- If storing for extended periods, consider keeping it in its original packaging or a display case to protect it from dust and accidental damage.
6. Rozwiązywanie Problemów
6.1 Stiff or Stuck Movable Parts
If a door, hood, or trunk is stiff or stuck:
- Do not force the part open.
- Gently wiggle the part to see if it loosens.
- Ensure no foreign objects are obstructing the movement.
- If the part remains stuck, contact customer support for assistance.
6.2 Koła nie toczą się płynnie
If the wheels do not roll smoothly:
- Check for any debris or dust caught in the axles.
- Sprawdź, czy koła są prawidłowo ustawione i nie są wygięte.
7. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | Bburago (Manufactured by May Cheong) |
| Nazwa modelu | Ferrari F12 Berlinetta |
| Numer modelu | 26007 |
| Skala | 1:24 |
| Tworzywo | Odlew metalowy z częściami z tworzywa sztucznego |
| Kolor | Czerwony |
| Wymiary (dł. x szer. x wys.) | Około 18 x 9 x 7 cm (7.64 x 3.39 x 2.26 cala) |
| Waga | 450 gramów |
| Zalecany wiek | 3 do 99 lat |
| Źródło zasilania | None (Manual Operation) |
| Wymagane baterie | NIE |
| Wymagany montaż | NIE |
| Środowisko użytkowania | Wnętrz |
| Rok modelowy | 2012 |

Image 7.1.1: Visual representation of the model's dimensions.
8. Gwarancja i wsparcie
For warranty information or product support, please refer to the contact details provided on the product packaging or the official Bburago webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.