CISA 1C141603044 Smart Plus 2 Door Closer, Black - Instruction Manual

1. Wprowadzenie

This manual provides detailed instructions for the installation, operation, and maintenance of your CISA Smart Plus 2 Door Closer. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.

The CISA Smart Plus 2 is a high-quality door closer designed for various door materials, offering adjustable closing force and speed, along with a hold-open function for convenience.

Główne cechy:

• Suitable for installation on doors of any material.
• Adjustable closing force EN 2-4, suitable for doors up to 80 kg and 1100 mm wide.
• Independent valves for regulating closing speed and final snap force.
• Stable hold-open position thanks to the adjustable steel arm.
• Rounded ABS casinprojekt g.

2. Informacje dotyczące bezpieczeństwa

Podczas instalacji i obsługi należy zawsze przestrzegać następujących środków ostrożności:

• Ensure the door closer is installed by a qualified professional if you are unsure about the process.
• Podczas instalacji należy używać odpowiednich narzędzi i środków ochrony osobistej (PPE).
• Nie należy podejmować prób modyfikacji samozamykacza ani jego podzespołów.
• Keep children and pets away from the door during installation and adjustment.
• Verify that all screws and fasteners are securely tightened after installation.

3. Dołączone komponenty

Przed rozpoczęciem instalacji należy upewnić się, że w opakowaniu znajdują się wszystkie elementy:

• CISA Smart Plus 2 Door Closer unit
• Arm with hold-open function
• Śruby montażowe
• Szablon wiertniczy
• Instrukcja instalacji (niniejsza instrukcja)

Rysunek 3.1: CISA Smart Plus 2 Door Closer with its main components.

4. Konfiguracja i instalacja

The CISA Smart Plus 2 door closer can be installed in various configurations (standard, parallel arm, top jamb). Refer to the drilling template for precise hole placement based on your chosen installation type and door swing.

Kroki instalacji:

1. Przygotuj drzwi i ościeżnicę: Determine the mounting position on the door or frame. Use the provided drilling template to mark the screw holes accurately.
2. Wywierć otwory pilotażowe: Drill pilot holes at the marked positions. Ensure the drill bit size is appropriate for the mounting screws to prevent stripping or cracking.
3. Montaż korpusu samozamykacza: Secure the main body of the door closer to the door or frame using the provided mounting screws. Ensure it is firmly attached and level.
4. Zamontuj zespół ramienia:
   

   Rysunek 4.1: Detail of the adjustable steel arm with hold-open.

   Attach the main arm to the door closer spindle. Then, attach the forearm to the door frame (for standard installation) or to the door (for parallel arm installation). Ensure the arm is correctly oriented according to the installation diagram in the drilling template.

5. Connect the Arm Sections: Connect the two sections of the arm using the provided fasteners. Adjust the length of the arm if necessary to ensure it is perpendicular to the door frame when the door is closed.
6. Regulacja początkowa: Perform initial adjustments for closing speed and final snap as described in the "Operating Instructions" section.

Rysunek 4.2: Approximate dimensions of the CISA Smart Plus 2 Door Closer for installation planning.

5. Instrukcja obsługi i regulacji

The CISA Smart Plus 2 door closer features independent valves for precise control over door closing behavior and a hold-open function.

Adjusting Closing Speed and Final Snap:

Rysunek 5.1: Location of the adjustment valves on the door closer body.

• Valve 1 (Closing Speed): This valve controls the main closing speed of the door from its fully open position until approximately 15 degrees from closed. Turn clockwise to decrease speed (slower closing) and counter-clockwise to increase speed (faster closing). Make small adjustments and test the door's movement.
• Valve 2 (Final Snap/Latching Speed): This valve controls the speed of the door for the last 10-15 degrees of closing, providing a "snap" to ensure the latch engages. Turn clockwise to decrease the final snap force and counter-clockwise to increase it. Adjust this to ensure the door closes securely without slamming.

Adjusting the Hold-Open Function:

The adjustable steel arm allows the door to be held open at a desired position. This is typically adjusted using a screw or mechanism on the arm itself. Refer to the specific diagram on your drilling template for the exact adjustment point.

• To engage the hold-open, open the door to the desired angle.
• Tighten the hold-open mechanism on the arm to secure the door in that position.
• To release, simply push the door further open or pull it slightly closed, depending on the mechanism type.
• If the hold-open function becomes weak or unreliable, check the tightness of the adjustment screw on the arm.

6. Konserwacja

Regular maintenance ensures the optimal performance and longevity of your CISA Smart Plus 2 Door Closer.

• Czyszczenie: Okresowo przecieraj korpus i ramię samozamykacza miękką szmatką.amp Do usuwania kurzu i brudu należy używać ściereczki. Unikać środków czyszczących o działaniu ściernym.
• Smarowanie: The internal mechanism is factory-lubricated and generally does not require additional lubrication. If the arm joints become stiff, a small amount of silicone-based lubricant can be applied to the pivot points.
• Kontrola: Annually inspect all mounting screws and fasteners for tightness. Re-tighten if necessary. Check the arm for any signs of wear or damage.
• Kontrola funkcjonalności: Periodically test the closing speed, final snap, and hold-open function to ensure they are operating correctly and adjust if needed.

7. Rozwiązywanie Problemów

Oto kilka typowych problemów i ich potencjalne rozwiązania:

8. Specyfikacje

9. Informacje o gwarancji

The CISA Smart Plus 2 Door Closer comes with a 12-miesięczna gwarancja from the date of purchase. This warranty covers manufacturing defects and material faults under normal use and service conditions.

The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

10. Obsługa klienta

If you encounter any issues not covered in this manual or require further assistance, please contact CISA customer support. For the most up-to-date contact information, please visit the official CISA website or refer to the packaging.

When contacting support, please have your product model number (1C141603044) and proof of purchase readily available.