Instrukcja obsługi komputera bazowego SIGMA BC 1200

1. Wprowadzenie

The SIGMA BC 1200 Baseline Computer is a wired bicycle computer designed to provide essential cycling data. It features functions for speed, time, and distance, helping you track your rides effectively. This manual will guide you through the installation, operation, and care of your device.

Rysunek 1: Przód view of the SIGMA BC 1200 Baseline Computer, displaying current speed, trip time, and other metrics.

2. Konfiguracja i instalacja

Proper installation is crucial for accurate readings. Follow these steps carefully:

1. Montaż uchwytu: Attach the computer bracket to your handlebar or stem using the provided zip ties or rubber bands. Ensure it is securely fastened and positioned for easy viewing.
2. Installing the Speed Sensor: Mount the speed sensor on the front fork, ensuring it is aligned with the spokes. The sensor should be positioned so that the magnet, when attached to a spoke, passes directly in front of the sensor's marked area.
3. Attaching the Magnet: Securely attach the spoke magnet to one of the spokes on your front wheel. Adjust its position so that it passes within 5mm of the speed sensor with each wheel rotation.
4. Podłączanie kabla: Route the sensor cable along the fork and brake cable, securing it with zip ties to prevent interference with moving parts. Plug the cable into the computer bracket.
5. Inserting the Computer: Slide the BC 1200 computer unit into the bracket until it clicks into place.
6. Ustawienie rozmiaru koła:

   To ensure accurate speed and distance measurements, you must set the correct wheel circumference. Refer to the table below or measure your wheel's circumference in millimeters.

   Common Wheel Circumferences (mm)

   Rozmiar koła	Obwód (mm)
   16 cala	1272
   20 cala	1596
   26 cala	2070
   27 cala	2155
   28 cali / 700C	2240
   29 cala	2330

   To enter the wheel size, press and hold the main button until the setting mode appears. Use the button to adjust the value and confirm.

Rysunek 2: Strona view of the SIGMA BC 1200, illustrating its compact design and wired connection.

3. Instrukcja obsługi

The SIGMA BC 1200 features a simple interface for easy navigation through its functions.

3.1. Funkcje przycisków

• Main Button (usually on the bottom or front): Press to cycle through functions. Press and hold to enter setting mode or reset certain values.

3.2 Dostępne funkcje

The BC 1200 provides the following key metrics:

• Obecna prędkość: Displays your real-time speed in km/h or mph.
• Średnia prędkość: Shows the average speed for your current trip.
• Maksymalna prędkość: Records the highest speed achieved during your current trip.
• Speed Trend: Indicates whether your current speed is above or below your average speed.
• Dystans podróży: Measures the distance covered for your current ride.
• Całkowity dystans: Accumulates the total distance covered by the computer since its last reset (or battery change).
• Czas podróży: Records the duration of your current ride.
• Total Travel Time: Accumulates the total time the computer has been active.
• Zegar: Wyświetla aktualny czas.

3.3. Resetting Trip Data

To reset trip-specific data (e.g., Trip Distance, Trip Time, Average Speed, Max Speed), navigate to the desired function and press and hold the main button until the value resets to zero. Total distance and total travel time are typically not reset with this action and require a battery change or specific reset procedure (refer to troubleshooting if needed).

4. Konserwacja

To ensure the longevity and accuracy of your SIGMA BC 1200, follow these maintenance guidelines:

• Czyszczenie: Wytrzyj jednostkę komputerową i czujnik miękką ściereczką.amp ściereczka. Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
• Wymiana baterii: The BC 1200 uses a Lithium Metal battery (included). When the display becomes dim or erratic, it's time to replace the battery. Carefully open the battery compartment, replace the old battery with a new one of the same type, and ensure the seal is properly seated before closing. Note that replacing the battery may reset total distance and time, depending on the model and duration of power loss.
• Cable and Sensor Check: Periodically inspect the sensor cable for any damage or fraying. Ensure the sensor and magnet remain securely mounted and properly aligned.
• Składowanie: If storing the bicycle for an extended period, remove the computer unit from its bracket to conserve battery life.

Rysunek 3: Kątowy view of the SIGMA BC 1200, showing the display and the "1200" model number on the side.

5. Rozwiązywanie Problemów

If you encounter issues with your BC 1200, try the following solutions:

6. Specyfikacje

Key technical specifications for the SIGMA BC 1200 Baseline Computer:

• Model: SIGMA BC 1200 (Model Number: 01950)
• Producent: SIGMA
• Typ wyświetlacza: LCD
• Rozmiar ekranu: 1.9 cali
• Typ czujnika: Przewodowy czujnik prędkości
• Źródło zasilania: 1 x Lithium Metal Battery (included)
• Waga przedmiotu: Około 68 g
• Wymiary produktu: Approximately 30 x 30 x 30 cm (computer unit)
• Funkcje: Current Speed, Average Speed, Maximum Speed, Speed Trend, Trip Distance, Total Distance, Trip Time, Total Travel Time, Clock.

7. Gwarancja i wsparcie

For warranty information and customer support, please refer to the official SIGMA website or contact your local retailer. Specific warranty terms and conditions may vary by region and purchase date. Please retain your proof of purchase for warranty claims.

Aby uzyskać dalszą pomoc, możesz odwiedzić stronę SIGMA Store on Amazon.