Selve SEL-PLUS 2/7 Tubular Motor Instruction Manual

1. Koniec produktuview

The Selve SEL-PLUS 2/7 is a high-quality tubular motor designed for roller shutters. It features electronic end position adjustment, making installation and configuration straightforward. This motor is compatible with SW60 roller shutter systems and provides a pulling force of 19 kg. Key functionalities include obstacle detection, overload protection, and the ability to connect multiple units in parallel.

Rysunek 1: Selve SEL-PLUS 2/7 tubular motor. This image displays the Selve SEL-PLUS 2/7 tubular motor, a grey cylindrical unit designed for roller shutters. It features black end caps for mounting and connection.

2. Główne cechy

• Wykrywanie przeszkód: Features obstacle detection in the downward direction with an automatic reverse function (rewinding from the obstacle).
• Łatwa regulacja: Simple unit adjustment via the four-wire connection cable, eliminating the need to open the roller shutter box.
• Zabezpieczenie przed przeciążeniem: Integrated overload protection in both directions (e.g., shutdown in case of a frozen shutter).
• Połączenie równoległe: Allows parallel connection of multiple Selve electronic drives without requiring additional switching elements.
• Automatic Direction Assignment: Provides automatic assignment of operating direction.

3. Konfiguracja i instalacja

Ważne informacje dotyczące bezpieczeństwa: Installation should only be performed by qualified personnel. Disconnect power before beginning any installation work. Ensure all local electrical codes and regulations are followed.

1. Przygotowanie: Ensure the roller shutter tube is correctly prepared and the mounting brackets are securely installed.
2. Motor Insertion: Carefully insert the tubular motor into the roller shutter tube. Ensure the drive adapter (crown) and bearing are properly seated.


Rysunek 2: Drive adapter (crown). This image shows a white plastic drive adapter, often referred to as a crown or wheel, which fits onto the motor shaft. It features hexagonal slots to engage with the roller shutter tube, transferring the motor's rotation.

3. Podłączenie elektryczne: Connect the four-wire cable to the motor's electrical port. Refer to the wiring diagram provided with the product for correct connections (Live, Neutral, Up, Down).

Rysunek 3: Electrical connection end cap. A detailed view of one end cap of the Selve tubular motor, showing the electrical connection port and mounting points. This is where the four-wire connection cable is attached.
4. Regulacja pozycji końcowej: Once powered, use the control unit to set the upper and lower end positions. The electronic adjustment system simplifies this process via the connected cable. Follow the specific instructions in the detailed product manual for precise adjustment steps.
5. Testowanie: After adjustment, thoroughly test the motor's operation, including obstacle detection and overload protection, to ensure proper functionality.

4. Instrukcja obsługi

The Selve SEL-PLUS 2/7 motor operates roller shutters by receiving commands from a connected switch or control system. Once installed and end positions are set:

• Up Command: Activates the motor to raise the roller shutter to its programmed upper end position.
• Down Command: Activates the motor to lower the roller shutter to its programmed lower end position.
• Polecenie Stop: Interrupts the motor's movement, stopping the roller shutter at its current position.
• Funkcje automatyczne: The motor's electronic system automatically manages end positions and reacts to obstacles or overloads as programmed during setup.

5. Konserwacja

The Selve SEL-PLUS 2/7 tubular motor is designed for long-term, maintenance-free operation. However, periodic checks can help ensure its longevity:

• Czyszczenie: Keep the roller shutter and surrounding area clean from dust and debris that could impede movement. Do not clean the motor directly with liquids.
• Kontrola połączenia: Periodically inspect the electrical connections for any signs of wear or loosening. Ensure the cable is not pinched or damaged.
• Brak części nadających się do samodzielnej naprawy przez użytkownika: The motor unit itself contains no user-serviceable parts. Do not attempt to open or repair the motor.
• Inspekcja profesjonalna: If you notice any unusual noises, erratic operation, or significant changes in performance, contact a qualified technician for inspection.

6. Rozwiązywanie Problemów

If you encounter issues with your Selve SEL-PLUS 2/7 tubular motor, consider the following common troubleshooting steps:

• Silnik nie reaguje:
  • Check the power supply to the motor. Ensure the circuit breaker is not tripped.
  • Sprawdź, czy wszystkie połączenia elektryczne są solidne i prawidłowo podłączone.
  • Test the control switch or system to ensure it is functioning correctly.
• Incorrect End Positions:
  • The end positions may need to be re-adjusted. Refer to the detailed adjustment procedure in the full product manual.
• Migawka zatrzymuje się niespodziewanie:
  • This could indicate obstacle detection or overload protection activation. Check for any obstructions in the shutter's path or excessive resistance.
  • If the issue persists without visible cause, contact technical support.
• Nietypowe dźwięki:
  • Loud grinding or clicking noises may indicate a mechanical issue within the roller shutter system or the motor. Discontinue use and seek professional assistance.

For complex issues or if troubleshooting steps do not resolve the problem, contact Selve customer support or a certified technician.

7. Specyfikacje

8. Gwarancja i wsparcie

For warranty information, technical support, or service inquiries regarding your Selve SEL-PLUS 2/7 tubular motor, please contact the retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.