Flexson FLXP1WB2021

Flexson FLXP1WB2021 Wall Bracket for Sonos Play:1 Speakers

Instrukcja obsługi

Wstęp

This manual provides instructions for the safe and proper installation and use of your Flexson FLXP1WB2021 Wall Bracket, designed specifically for Sonos Play:1 speakers. Please read this manual thoroughly before installation and retain it for future reference.

Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE:

Improper installation can lead to equipment damage or personal injury. If you are unsure about the installation process, consult a qualified professional.

  • Ensure the wall material is suitable for supporting the weight of the bracket and speaker.
  • Use appropriate wall mounting hardware (screws and anchors) for your specific wall type. Wall mounting hardware is not included with this product.
  • Do not exceed the maximum weight capacity of the bracket. This bracket is designed for Sonos Play:1 speakers only.
  • Trzymaj małe części poza zasięgiem dzieci.

Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:

  • 2 x Flexson Wall Brackets (FLXP1WB2021)
  • Instrukcja obsługi (ten dokument)

Notatka: Sonos Play:1 speakers and wall mounting hardware (screws, anchors) are not included.

Konfiguracja i instalacja

Follow these steps to install your Flexson wall bracket:

  1. Przygotuj miejsce montażu: Choose a suitable wall location, ensuring it can support the weight of the speaker and bracket. Mark the desired drilling points for the wall bracket.
  2. Wywierć otwory pilotażowe: Using an appropriate drill bit for your wall type and chosen mounting hardware, drill pilot holes at the marked locations.
  3. Attach Wall Bracket: Securely fasten the wall bracket to the wall using suitable screws and wall anchors (not supplied). Ensure the bracket is level and firmly attached.
  4. Attach Speaker to Bracket: The Flexson bracket features a unique 2-piece design for easy assembly. Align your Sonos Play:1 speaker with the bracket's mounting points. The bracket allows for neat cable routing.
  5. Bezpieczny głośnik: Use the provided screw to secure the Sonos Play:1 speaker to the bracket. Ensure it is tightened sufficiently to hold the speaker firmly.
  6. Zarządzanie kablami: Route the speaker's power cable neatly through the designated channels on the bracket to maintain a clean appearance.
Two black Flexson wall brackets for Sonos Play:1 speakers, showing the front with branding and model number.

Figure 1: Flexson FLXP1WB2021 Wall Brackets. These brackets are designed to securely hold Sonos Play:1 speakers.

Technical drawing showing dimensions of the Flexson wall bracket for Sonos Play:1, including side, front, and back views z pomiarami w milimetrach.

Figure 2: Dimensional drawing of the Flexson wall bracket, illustrating various measurements for installation planning.

Obsługa i regulacja

Once installed, the Flexson wall bracket offers flexible positioning for your Sonos Play:1 speaker:

  • Przechylanie: The bracket allows for a 15° downward tilt, enabling you to direct sound towards your listening area.
  • Obrót: You can swivel the speaker 40° left and 40° right to optimize sound dispersion.
  • Montaż odwrócony: The bracket supports mounting the speaker upside down. This feature allows easier access to the speaker's on-device controls when mounted higher on a wall.

Konserwacja

To maintain the appearance and functionality of your Flexson wall bracket:

  • Clean the bracket with a soft, dry cloth.
  • Unikaj stosowania środków czyszczących o właściwościach ściernych i rozpuszczalników, ponieważ mogą one uszkodzić wykończenie.
  • Okresowo sprawdzaj wszystkie śruby mocujące, aby mieć pewność, że są dobrze dokręcone i bezpieczne.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Speaker feels unstable or loose.Mounting screws are not tight enough, or incorrect wall anchors were used.Ensure all wall mounting screws and the speaker attachment screw are securely tightened. Verify that appropriate wall anchors were used for your wall type.
Trudności z regulacją nachylenia lub obrotu.Mechanism may be stiff or overtightened.Apply gentle force. Do not force adjustments if resistance is excessive. Check for any obstructions.

Specyfikacje

  • Numer modelu: FLXP1WB2021
  • Zgodność: Sonos Play:1 Speakers
  • Tworzywo: Stal
  • Kolor: Czarny
  • Regulacja nachylenia: 15° downwards
  • Regulacja obrotu: 40° w lewo, 40° w prawo
  • Wymiary produktu: 5.47 x 3.62 x 1.77 cala (139 x 92 x 45 mm)
  • Waga przedmiotu: 7 uncji (198 grama)
  • Producent: FLEXSON

Gwarancja i wsparcie

Aby uzyskać informacje dotyczące gwarancji i pomocy technicznej, zapoznaj się z oficjalną stroną Flexson webOdwiedź witrynę lub skontaktuj się ze sprzedawcą. Zachowaj dowód zakupu na wypadek reklamacji.

© 2023 Flexson. Wszelkie prawa zastrzeżone.