CGOLDENWALL High Precision Silk Screen Printing Tension Meter 7-36N User Manual

1. Wprowadzenie

This manual provides detailed instructions for the proper use and maintenance of your CGOLDENWALL High Precision Silk Screen Printing Tension Meter. This instrument is designed for accurate measurement of mesh tension in silk screen printing applications, ensuring consistent and high-quality results. Please read this manual thoroughly before operation.

Image 1.1: CGOLDENWALL High Precision Silk Screen Printing Tension Meter.

2. Koniec produktuview

2.1. Lista rzeczy do spakowania

Po rozpakowaniu sprawdź, czy wszystkie wymienione poniżej przedmioty znajdują się na miejscu i są w dobrym stanie:

• 1 x Tension Meter
• 1 x Calibration Glass
• 1 x Storage Case
• 1 x Instrukcja obsługi

Image 2.1: Contents of the product packaging, including the tension meter, calibration glass, storage case, and manual.

2.2. Identyfikacja komponentów

Familiarize yourself with the various parts of the tension meter:

Image 2.2: Diagram illustrating the main components of the tension meter, including the spindle sheath, pointer, scale disc, table body, calibration glass, measuring board, scale, and scale lock.

• Spindle Sheath: Protects the internal mechanism.
• Wskaźnik: Indicates the tension reading on the scale.
• Scale Disc: The main dial displaying tension values.
• Table Body: The main housing of the meter.
• Calibration Glass: Used for zero calibration.
• Measuring Board: The contact surface that rests on the screen mesh.
• Skala: Markings around the dial indicating tension in N/cm.
• Scale Lock: Secures the scale in place.

Image 2.3: Various perspectives of the tension meter, showing its front, back, left, and right sides.

3. Konfiguracja

The tension meter is factory-calibrated. However, it is essential to perform a zero calibration before each use to ensure accuracy.

3.1. Kalibracja zera

1. Place the tension meter on the provided calibration glass plate or any smooth, flat, and hard surface.
2. Turn the dial to reset the pointer to the zero mark. This ensures the meter is accurately calibrated for measurement.

Image 3.1: Illustration of placing the tension meter on a glass plate and adjusting the dial for zero calibration.

4. Działanie

Follow these steps to accurately measure the tension of your silk screen mesh:

Image 4.1: Visual guide to the operational steps for the tension meter, including initial calibration and measurement.

1. Perform zero calibration as described in Section 3.1.
2. Place the tension meter gently on the silk screen mesh. Ensure the measuring board is fully in contact with the mesh.
3. Gently flick the silk screen mesh. The pointer will move and then settle. The tension value is indicated by the pointer once it stops moving.
4. The Newton indication on the meter shows the tension at the contactor. The error margin is ±0.5N.
5. The second circle on the meter indicates the measured value during the measurement process. For accurate readings, observe the pointer's position after it has completed its initial movement and settled.

4.1. Understanding Readings and Tips

Image 4.2: Important tips for using the tension meter, including data display methods and calibration reminders.

• Data Display Method: The data indicated by the pointer during its first circle of movement is not accurate. The second circle provides the correct reading. You should gently flick the mesh beside the tension meter to help the pointer settle. The normal reading is taken from the second circle of the pointer.
• N/cm: This unit represents the pulling force per centimeter of mesh width. It is generally represented in Newtons (N) or Kilograms (Kg), where 1kg equals 9.8N.
• Small Pointer: The small pointer is used to display the number of complete circles made by the large pointer. For example, if the small pointer points to "2", it means the large pointer has circled twice.
• Data Normal Reading: You can read the data when the large pointer has stopped moving.

4.2. Recommended Tension Guidelines

The following table provides general tension guidelines for different screen types and printing tasks:

Image 4.3: A table outlining recommended tension values (N/CM) for various screen types and printing applications.

5. Konserwacja

• The tension meter is a precision instrument. Avoid dropping it or subjecting it to unnecessary impacts. Handle with care during use.
• Do not attempt to disassemble or re-repair the instrument on your own. Disassembly is not allowed as it may affect calibration and accuracy.
• Avoid touching the bottom contactor with your hands to prevent contamination or damage.
• Store the machine vertically when not in use, preferably in its protective storage case.
• Keep the calibration glass clean and free from dust or debris.

6. Rozwiązywanie Problemów

• Niedokładne odczyty: Ensure the meter is properly zero-calibrated on a flat, hard surface before each use. Gently flick the screen mesh to help the pointer settle for the most accurate reading (refer to the second circle of the pointer). If persistent inaccuracies occur, contact customer support.
• Pointer Not Moving Smoothly: Check for any obstructions on the measuring board or debris within the mechanism. Do not force the pointer.
• Damage to Instrument: If the instrument is dropped or visibly damaged, its accuracy may be compromised. Do not attempt self-repair.

7. Specyfikacje

Image 7.1: Table detailing the technical parameters of the tension meter.

8. Gwarancja i wsparcie

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the documentation included with your purchase or contact CGOLDENWALL customer service.

For technical support, service, or inquiries, please contact your retailer or the manufacturer directly. Do not attempt to repair the device yourself, as this may void the warranty and cause further damage.

Producent: ŚCIANA CGOLDENWALL

E-mail: słoneczniksmile20120401@hotmail.com