Nerf A9317

Nerf Cross Bolt Blaster (Model A9317) Instruction Manual

Model: A9317 | Brand: Nerf

1. Wprowadzenie

This manual provides essential instructions for the safe and effective use of your Nerf Cross Bolt Blaster. The Nerf Cross Bolt is a high-capacity, clip-fed dart blaster designed for performance. It features a crossbow design and is part of the N-Strike Elite series, known for its dart firing distance.

Nerf Cross Bolt Blaster in its packaging, showing a child holding the blaster.

Image 1.1: The Nerf Cross Bolt Blaster in its retail packaging, highlighting its features and design.

2. Informacje dotyczące bezpieczeństwa

Please read and understand all safety warnings before operating the blaster. Failure to follow these instructions may result in injury.

  • OSTRZEŻENIE: Nie celuj w oczy ani w twarz.
  • To avoid injury, use only darts designed for this product. Do not modify darts or blaster.
  • W przypadku młodszych użytkowników zaleca się nadzór osoby dorosłej.
  • Podczas pracy urządzenia należy trzymać palce z dala od ruchomych części.

3. Zawartość opakowania

Sprawdź, czy w pakiecie znajdują się wszystkie komponenty:

  • Nerf Cross Bolt Blaster (Model A9317)
  • 12-strzałkowy magazynek
  • 12 rzutki Nerf Elite
A person holding the Nerf Cross Bolt Blaster box.

Image 3.1: A person holding the product box, indicating the contents within.

4. Instalacja i montaż

4.1 Ładowanie klipsa do rzutek

  1. Upewnij się, że pistolet nie jest uzbrojony.
  2. Insert Nerf Elite darts into the 12-dart clip, pushing them in until they click into place. Ensure darts are fully seated.
A person inserting a dart clip into the Nerf Cross Bolt Blaster.

Image 4.1: Demonstrates the process of inserting the loaded dart clip into the blaster's magazine well.

4.2 Inserting the Clip into the Blaster

  1. Locate the clip well on the underside of the blaster.
  2. Slide the loaded 12-dart clip into the clip well until it locks securely into place.

5. Działanie

5.1 Przygotowanie blastera

  1. With the clip inserted, grasp the priming handle located at the top of the blaster.
  2. Pull the priming handle all the way back until it clicks, then push it forward to its original position. The blaster is now primed and ready to fire.
Hands demonstrating how to prime the Nerf Cross Bolt Blaster by pulling back the priming handle.

Obraz 5.1: Zbliżenie view of hands operating the priming mechanism on the top of the blaster.

5.2 Strzelanie z blastera

  1. Aim the blaster at a safe target, ensuring no eyes or faces are in the line of fire.
  2. Naciśnij spust, aby wystrzelić rzutkę.
  3. To fire another dart, repeat the priming process (Section 5.1) and pull the trigger again.
A person holding the Nerf Cross Bolt Blaster in a firing stance.

Image 5.2: A user demonstrating the proper grip and firing posture with the Nerf Cross Bolt Blaster.

A person aiming the Nerf Cross Bolt Blaster.

Image 5.3: A user aiming the Nerf Cross Bolt Blaster, ready to engage a target.

5.3 Removing the Dart Clip

To remove the dart clip, press the clip release button (usually located near the clip well) and pull the clip downwards.

5.4 Oficjalny film o produkcie

Video 5.4: An official product video demonstrating the features and operation of the Nerf N-Strike Elite CrossBolt Blaster. This video shows how to load the clip, prime the blaster, and fire darts, highlighting its accuracy and range.

6. Konserwacja

6.1 Czyszczenie

Wytrzyj blaster reklamąamp cloth to remove dust and dirt. Do not submerge the blaster in water or use harsh cleaning agents.

6.2 Pielęgnacja rzutek

To maintain optimal performance, keep darts clean and free from damage. Bent or torn darts may affect firing accuracy and can cause jamming.

7. Rozwiązywanie Problemów

Problem Możliwa przyczyna Rozwiązanie
Blaster does not fire. Blaster nie jest w pełni uzbrojony. Ensure the priming handle is pulled all the way back until it clicks, then pushed fully forward.
Dart jams in the barrel. Damaged dart or improper loading. Open the jam access door (if available) and carefully remove the jammed dart. Use only undamaged, official Nerf Elite darts. Ensure darts are fully inserted into the clip.
Darts do not load from clip. Clip not fully inserted or empty. Ensure the clip is securely locked into the blaster. Reload the clip with darts.

8. Specyfikacje

  • Numer modelu: A9317
  • Marka: Osłabić
  • Tworzywo: Plastikowy
  • Kolor: Wielobarwność
  • Waga przedmiotu: 0.01 uncji (ok. 0.28 gramów)
  • Wymiary przedmiotu: 2.68 x 18.5 x 10 cala (6.8 x 47 x 25.4 cm)
  • Przedział wiekowy: 8 lat i więcej (minimalny wiek producenta: 96 miesiące)
  • Tryb działania: Podręcznik
  • Maksymalny zasięg: Do 90 stóp (27 metrów)
  • Źródło zasilania: Podręcznik
  • Wymagany montaż: NIE
Diagram showing the dimensions of the Nerf Cross Bolt Blaster.

Image 8.1: A diagram illustrating the approximate dimensions of the Nerf Cross Bolt Blaster.

9. Gwarancja i wsparcie

This product is manufactured by Hasbro. The manufacturer states "No Warranty" for this item. For further assistance or inquiries, please refer to the official Nerf website or contact Hasbro customer support.

Oficjalny Nerf Webstrona: Odwiedź sklep Nerf na Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.