Wstęp
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Falcon B101S Q 626 B Series Grade 2 Medium Duty Cylindrical Lock. This lock features a passage function with a Quantum lever and a keyless cylinder, designed for applications requiring reliable, non-locking access.
Image: Falcon B101S Q 626 Passage Function Quantum Lever Lock in Satin Chrome finish, showing both exterior and interior levers and the latch mechanism.
Konfiguracja i instalacja
Zawartość zestawu:
- Lock Chassis
- Dźwignia zewnętrzna
- Dźwignia wewnętrzna
- Roses (interior and exterior)
- Through-bolted Rose Inserts
- Latch Bolt Assembly
- Blacha zaczepowa
- Śruby montażowe
Wymagane narzędzia:
- Śrubokręt krzyżakowy
- Taśma miernicza
- Ołówek
- Wood Chisel (if needed for strike plate)
- Drill with appropriate bits (for new installations)
Kroki instalacji:
- Przygotuj drzwi: Ensure the door preparation meets ANSI A156.2 Series 4000 Grade 2 standards. The lock is non-handed, meaning it can be installed on left or right-hand doors without modification.
- Montaż rygla zatrzaskowego: Insert the latch bolt assembly into the edge bore hole of the door. Ensure the bevel of the latch faces the door frame. Secure with screws.
- Install Exterior Chassis: Insert the exterior lock chassis into the cross bore hole, ensuring the spindle engages with the latch mechanism.
- Install Interior Chassis: Place the interior rose and lever assembly over the interior side of the door, aligning it with the exterior chassis.
- Bezpieczna blokada: Use the through-bolts to secure the interior and exterior assemblies together. Tighten screws evenly to prevent binding.
- Zamontuj dźwignie: Secure the levers to the spindles. For the Quantum lever, ensure the retainer is properly seated.
- Montaż blachy zaczepowej: Mark and chisel out the door frame for the strike plate, ensuring the latch bolt engages smoothly. Secure the strike plate with screws.
- Operacja testowa: Close the door and test the operation of both levers to ensure the latch retracts and extends freely.
Instrukcja obsługi
The Falcon B101S Q 626 lock is a passage function lock, meaning it does not have a locking mechanism. Both the interior and exterior levers are always free to operate, allowing unrestricted access. To open the door, simply depress either the interior or exterior lever. The latch bolt will retract, allowing the door to open. Releasing the lever will allow the latch bolt to extend, securing the door in the closed position.
Konserwacja
Regular maintenance ensures the longevity and smooth operation of your Falcon lock.
- Czyszczenie: Wyczyść zewnętrzne powierzchnie zamka miękką,amp szmatką. Unikaj środków czyszczących o działaniu ściernym i rozpuszczalników, ponieważ mogą one uszkodzić wykończenie.
- Smarowanie: Periodically apply a small amount of silicone-based lubricant to the latch bolt mechanism and inside the lever hub to maintain smooth operation. Do not use oil-based lubricants, which can attract dust and debris.
- Kontrola: Annually inspect all mounting screws for tightness. Loose screws can affect the lock's performance and durability.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Dźwignia jest sztywna lub trudno ją przekręcić. | Lack of lubrication; debris in mechanism; misaligned installation. | Apply silicone lubricant. Clean visible debris. Check for proper alignment during installation. |
| Zasuwka nie chowa się całkowicie. | Binding due to overtightened screws; debris in latch mechanism. | Loosen mounting screws slightly and re-test. Clean latch bolt area. |
| Door rattles when closed. | Strike plate not properly aligned or shimmed. | Adjust strike plate position or add shims behind it to reduce play. |
| Levers feel loose or wobbly. | Mounting screws are loose; lever retainer not fully engaged. | Tighten all mounting screws. Ensure lever retainer is properly seated. |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | Sokół |
| Numer modelu | B101S Q 626 |
| Typ zamka | Cylindrical Lock, Passage Function |
| Styl dźwigni | Quantum Lever |
| Typ cylindra | Bezkluczykowy |
| Skończyć | Satynowy Chrom (626) |
| Tworzywo | Alloy Steel, Brass, Bronze, Chrome, Zinc |
| Stopień | ANSI / BHMA klasa 2 |
| Przekazywanie | Nieręczne |
| Lista UL | 1.5 hour fire door |
| Waga przedmiotu | 3.62 funta |
| Wymiary opakowania | 9.5 x 7.1 x 3.8 cala |
Informacje o gwarancji
Falcon provides a 10-year warranty for the B101S Q 626 B Series Grade 2 Medium Duty Cylindrical Lock. This warranty covers defects in material and workmanship under normal use. For specific terms and conditions, please refer to the official Falcon warranty documentation or contact customer support.
Wsparcie
For further assistance, technical support, or warranty claims, please contact Falcon customer service. You can typically find contact information on the manufacturer's official weblub za pośrednictwem sprzedawcy produktu.
Więcej informacji znajdziesz na oficjalnej stronie Falcon Brand Page.