1. Wprowadzenie
This manual provides essential information for the safe and effective use of your Fluke 117 Digital Multimeter and Fluke 323 True-RMS Clamp Meter combo kit. This kit is designed for residential and commercial electricians, offering productive and effective troubleshooting capabilities.
2. Dołączone komponenty
Your Fluke 117/323 KIT includes the following items:
- Fluke 117 Cyfrowy Multimetr
- Fluke 323 True-RMS klamp Metr
- Przewody pomiarowe (czerwony i czarny)
- Magnetyczny pasek do zawieszania TPAK
- C115 Durable Soft Carrying Case
- 9V Batteries (2 included, pre-installed)
3. Konfiguracja
3.1. Instalacja baterii
The Fluke 117 and 323 meters come with 9V batteries pre-installed. If replacement is needed, refer to the detailed instructions in the full user manual for safe battery compartment access.
3.2. Podłączanie przewodów pomiarowych
Insert the red test lead into the VΩmA jack and the black test lead into the COM jack for voltage, resistance, and continuity measurements. For current measurements with the Fluke 117, insert the red lead into the 10A FUSED jack and the black lead into the COM jack.
3.3. TPAK Magnetic Hanging Strap Assembly
The TPAK magnetic hanging strap allows for hands-free operation. Attach the strap to the back of your multimeter by sliding it into the designated slot until it clicks securely. The magnetic end can then be used to hang the meter on metal surfaces, pipes, or electrical boxes.
3.4. Koniec zestawuview Wideo
Wideo 1: W tym filmie przedstawionoview of the contents included in the Fluke 117/323 combo kit, demonstrating each component and its basic function.
4. Instrukcja obsługi
4.1. Fluke 117 Digital Multimeter
The Fluke 117 measures AC and DC voltage, as well as AC and DC amps. It features True RMS for accurate measurements on non-linear loads and low input impedance to prevent false readings due to ghost voltage. The VoltAlert™ non-contact voltage detection feature enhances safety by indicating the presence of voltage bez bezpośredniego kontaktu.
4.2. Fluke 323 True-RMS Clamp Metr
The Fluke 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage. It provides True RMS AC voltage and current for accurate measurements on non-linear signals. Use the clamp jaw to measure AC current by clamping it around a single conductor.
4.3. Multimeter Features Video
Video 2: This video highlights key features and functionalities of the Fluke 117 True-RMS Multimeter, including its automatic AC/DC voltage detection and non-contact voltagalarm.
4.4. klamp Meter Features Video
Video 3: This video details the features of the Fluke 323 Clamp Meter, including its one-handed operation, test lead connections, and AC current measurement capabilities.
5. Konserwacja
5.1. Czyszczenie
Wytrzyj obudowę licznika wodąamp cloth and mild detergent. Do not use abrasives or solvents. Clean the test leads by wiping them with a damp płótno.
5.2. Wymiana baterii
When the battery indicator appears on the display, replace the 9V battery. To replace, open the battery compartment cover on the back of the meter using a screwdriver. Replace with new 9V alkaline batteries, ensuring correct polarity, then secure the cover.
5.3. Test Lead Inspection
Regularly inspect test leads for damaged insulation or exposed metal. Replace damaged leads immediately to ensure safety and accurate measurements.
6. Rozwiązywanie Problemów
If your Fluke 117/323 kit is not functioning as expected, consider the following:
- Brak wyświetlacza/niski poziom naładowania baterii: Sprawdź poziom naładowania baterii. Wymień baterie, jeśli są niskie.
- Niedokładne odczyty: Ensure test leads are properly connected and undamaged. Verify the correct function is selected on the rotary dial. For clamp meter current measurements, ensure the clamp wokół pojedynczego przewodnika.
- Fałszywa tomtage Readings (Fluke 117): The low input impedance feature helps prevent ghost voltage readings. If readings are still suspect, ensure proper grounding.
- Brak sygnału dźwiękowego ciągłości: Check if the continuity function is selected and test leads are making good contact.
For further assistance, refer to the detailed troubleshooting section in the comprehensive user manual or contact Fluke customer support.
7. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Marka | Fuks |
| Numer modelu | FLUKE-117/323 KIT |
| Źródło zasilania | Alkaline (2 x 9V batteries included) |
| Waga przedmiotu | 1.76 funta (800 gramów) |
| Wymiary produktu | 9 x 30.48 x 3.5 cala |
| Typ pomiaru | Multimetr, Clamp Metr |
| Dokładność pomiaru | 0.5% + 2 |
| Górna ocena temperatury | 752 stopni Fahrenheita |
| Ocena bezpieczeństwa | UL, CSA (Canada and US), ANSI/ISA, CAN/CSA, CE, C-Tick, TUV, VDE |
| Stosowanie | Profesjonalny |
8. Informacje o gwarancji
The Fluke 117/323 Kit comes with a 2-letnia gwarancja on material and workmanship. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included in your kit or visit the official Fluke webstrona.
9. Obsługa klienta
For technical assistance, product inquiries, or service requests, please visit the official Fluke website or contact their customer support line. Contact information can typically be found on the Fluke webstronie internetowej lub w dokumentacji dołączonej do produktu.
