Kolpin Universal Gun/Saw Boot Bracket

1. Wprowadzenie

This manual provides detailed instructions for the installation, operation, and maintenance of your Kolpin Universal Gun/Saw Boot Bracket, Model 20200. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Produkt ponadview

The Kolpin Universal Gun/Saw Boot Bracket is designed for secure attachment of Kolpin Gun Boot IV, 4.3, 6.0, Kolpin Stronghold Gun Boot L cases, and saw boots (sold separately) to ATVs or UTVs. Its versatile design allows for adjustment to multiple angle positions and fits various tubular steel racks or UTV frames.

2. Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:

• Kolpin Universal Gun/Saw Boot Bracket - 20200
• All necessary mounting hardware (bolts, nuts, washers, rubber coated ring)

3. Główne cechy

• Zgodność: Fits Kolpin Gun Boot IV, 4.3, 6.0, Kolpin Stronghold Gun Boot L cases and saw boot only (sold separately).
• Uniwersalne dopasowanie: Designed for most ATV tubular steel racks or UTV frames up to 2 inches diameter, including square tubing.
• Trwała konstrukcja: All-metal constructed loop bracket ensures longevity and strength.
• Regulowany kąt: Bracket can be adjusted to multiple angle positions between 0° and 45° for optimal positioning.
• Bezpieczne trzymanie: Features a rubber-coated ring to securely hold your Gun Boot case.

4. Informacje dotyczące bezpieczeństwa

Always prioritize safety when installing and using this product. Failure to follow these instructions could result in injury or damage to equipment.

• Ensure the bracket is securely fastened to your vehicle's rack or frame before mounting any boot.
• Do not exceed the weight capacity of your vehicle's rack system.
• Regularly inspect all mounting hardware for tightness and wear.
• Always ensure the gun or saw boot is properly seated and secured in the bracket before operating the vehicle.
• Podczas regulacji trzymaj dłonie i palce z dala od ruchomych części.
• This product is intended for off-road use. Adhere to all local laws and regulations regarding transport of firearms or tools.

5. Konfiguracja i instalacja

Follow these steps for proper installation of your Kolpin Universal Gun/Saw Boot Bracket.

5.1 Wymagane narzędzia

• Wrench set (appropriate sizes for bolts)
• Measuring tape (optional, for optimal placement)

5.2 Wybór miejsca montażu

Choose a mounting location on your ATV or UTV that provides secure attachment and does not obstruct vehicle operation or visibility. The bracket is designed to fit tubular steel racks or UTV frames up to 2 inches in diameter, including square tubing.

5.3 Attaching the Bracket Base

Position the bracket base on your chosen rack or frame. Use the provided U-bolts or other suitable hardware to secure the base firmly. Ensure the base is level and stable before tightening all nuts.

Obraz: Szczegółowy view of the Kolpin Universal Gun/Saw Boot Bracket, showing its various components and the rubber-coated ring.

5.4 Assembling the Adjustable Arm

Attach the adjustable arm to the bracket base using the pivot bolt and nut. Do not fully tighten at this stage, as you will need to adjust the angle.

5.5 Regulacja kąta

Place your Kolpin Gun Boot or Saw Boot (sold separately) into the rubber-coated ring of the bracket. Adjust the angle of the arm to achieve the desired position, typically between 0° and 45° relative to the vehicle's rack. Ensure the boot is clear of wheels, suspension, and other vehicle components.

Image: A person adjusting the angle of a Kolpin Gun Boot mounted on an ATV using the universal bracket, demonstrating the flexibility of the bracket's positioning.

Image: A Kolpin Gun Boot securely mounted on the rear rack of an ATV, showcasing the bracket's stable attachment and the boot's position.

5.6 Dokręcanie końcowe

Once the desired angle is set, securely tighten all bolts and nuts on the bracket base and the adjustable arm. Double-check all connections to ensure they are firm and stable.

Obraz: Bok view of a Kolpin Gun Boot mounted on an ATV, illustrating the bracket's low profile and how the boot extends along the vehicle's side.

6. Działanie

To use the Kolpin Universal Gun/Saw Boot Bracket:

1. Ensure the bracket is securely installed and all fasteners are tight.
2. Open your Kolpin Gun Boot or Saw Boot (sold separately).
3. Carefully insert your firearm or saw into the boot.
4. Close and secure the boot according to its own instructions.
5. Place the secured boot into the rubber-coated ring of the bracket. The rubber coating provides a snug fit and prevents scratching.
6. Verify that the boot is firmly seated in the bracket before operating your vehicle.

7. Konserwacja

Regular maintenance will ensure the longevity and reliable performance of your bracket.

• Kontrola: Periodically inspect the bracket and all mounting hardware for signs of wear, corrosion, or damage. Check for loose bolts or nuts.
• Czyszczenie: Clean the bracket with mild soap and water. Avoid harsh chemicals that may damage the finish or rubber coating.
• Smarowanie: If the adjustable pivot point becomes stiff, apply a small amount of silicone-based lubricant.
• Składowanie: If removing the bracket for extended periods, store it in a dry place away from direct sunlight and extreme temperatures.

8. Rozwiązywanie Problemów

If you encounter issues with your Kolpin Universal Gun/Saw Boot Bracket, refer to the following common problems and solutions:

9. Specyfikacje

10. Gwarancja i wsparcie

Kolpin products are manufactured to high standards and are backed by a limited warranty. For specific warranty details, product registration, or technical support, please visit the official Kolpin webstronie lub skontaktuj się z działem obsługi klienta.

Webstrona: www.kolpin.pl

Obsługa klienta: Refer to the Kolpin webwitryna do informacji kontaktowych.