Tenergy 2200mAh Sub C NiCd Battery User Manual

1. Wprowadzenie

This manual provides essential information for the safe and effective use of your Tenergy 2200mAh Sub C NiCd rechargeable batteries. Please read this manual thoroughly before using the batteries to ensure optimal performance and longevity.

Image 1.1: Tenergy Sub C NiCd batteries are suitable for various power tools and devices.

2. Informacje dotyczące bezpieczeństwa

Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the batteries or device.

• Nie wrzucaj baterii do ognia. Mogą eksplodować lub wyciekać.
• Do not mix new batteries with used batteries, or batteries of different types (e.g., NiCd with NiMH).
• Nie wolno zwierać zacisków akumulatora.
• Do not disassemble, puncture, or modify the batteries.
• Keep batteries away from water, heat, and direct sunlight.
• Przechowuj baterie w miejscu niedostępnym dla dzieci i zwierząt domowych.
• If a battery leaks, avoid contact with the fluid. If contact occurs, wash immediately with soap and water. Seek medical attention if irritation persists.
• Use only chargers specifically designed for NiCd batteries.

3. Koniec produktuview

The Tenergy 2200mAh Sub C NiCd batteries are designed for high-drain applications, offering reliable and continuous power. These batteries feature a flat top design with pre-soldered tabs, making them ideal for custom battery pack assembly.

Image 3.1: Tenergy 2200mAh Sub C NiCd Battery 15-Pack.

Główne cechy:

• Duża pojemność: 2200mAh for extended runtime.
• Tomtage: 1.2V per cell.
• Możliwość ładowania: Can be recharged up to 500 times, reducing waste and cost.
• Flat Top with Tabs: Equipped with pre-soldered tabs for easy integration into custom battery packs.
• NiCd Chemistry: Provides consistent power output for high-drain devices.

Image 3.2: The 2200mAh capacity ensures continuous energy for your devices.

4. Aplikacje

These Tenergy Sub C NiCd batteries are suitable for a wide range of high-drain electronic devices and custom battery pack applications, including:

• Power Tools (e.g., cordless drills, electric screwdrivers)
• Oświetlenie awaryjne
• Portable Devices (e.g., handheld vacuums, remote-controlled toys)
• DIY Battery Packs requiring Sub C cells with tabs

Image 4.1: These batteries are ideal for high-drain devices.

5. Konfiguracja i instalacja

The Tenergy Sub C NiCd batteries come with pre-soldered tabs, simplifying the process of creating custom battery packs or replacing cells in existing packs.

Creating Custom Battery Packs:

1. Zaplanuj swoją konfigurację: Determine the required voltage and capacity for your device. This will dictate the number of cells and their series/parallel arrangement.
2. Przygotuj połączenia: The pre-soldered tabs allow for easy soldering to connect cells in series or parallel. Ensure proper polarity (+ to - for series, + to + and - to - for parallel).
3. Lutowanie: Use appropriate soldering techniques to connect the tabs. Minimize heat exposure to the battery cell during soldering.
4. Izolacja: After soldering, insulate all connections with heat shrink tubing or electrical tape to prevent short circuits.
5. Testowanie: Before final assembly, test the voltage and continuity of your custom pack to ensure correct wiring.

Image 5.1: Pre-soldered tabs facilitate easy assembly of custom battery packs.

6. Instrukcja obsługi

Once installed in your device or custom pack, operate the batteries according to the device manufacturer's instructions. For optimal performance, follow these general guidelines:

• Opłata początkowa: Fully charge new batteries before their first use.
• Cykl ładowania: For NiCd batteries, it is often recommended to fully discharge the battery before recharging to prevent the "memory effect."
• Temperatura: Operate batteries within their recommended temperature range (typically 0°C to 45°C for charging, -20°C to 60°C for discharge).
• Unikaj nadmiernego rozładowania: Do not allow batteries to discharge completely below their minimum voltage, as this can damage the cells.

7. Konserwacja

Proper maintenance extends the lifespan and performance of your Tenergy NiCd batteries.

• Regularne ładowanie: Recharge batteries promptly after use, especially if they have been heavily discharged.
• Full Cycles: Periodically perform a full discharge and recharge cycle to mitigate the NiCd memory effect and maintain capacity.
• Czyszczenie: Keep battery terminals clean and free of corrosion. Use a dry cloth to wipe them if necessary.
• Składowanie: For long-term storage, charge batteries to about 40-50% capacity and store them in a cool, dry place. Avoid extreme temperatures.
• Sprzedaż: NiCd batteries contain cadmium, a toxic heavy metal. Do not dispose of them in household waste. Recycle them at designated battery recycling centers.

8. Rozwiązywanie Problemów

If you encounter issues with your Tenergy NiCd batteries, consider the following common solutions:

9. Specyfikacje

Detailed technical specifications for the Tenergy 2200mAh Sub C NiCd Battery:

• Typ baterii: Niklowo-kadmowy (NiCd)
• Rozmiar komórki: Sub C
• Objętość nominalnatage: 1.2 wolty
• Pojemność: 2200 mlnampgodzina (mAh)
• Możliwość ponownego użycia: Rechargeable (up to 500 cycles)
• Konfiguracja: Flat Top with Tabs
• Wymiary przedmiotu: Approximately 0.91 x 0.91 x 1.69 inches (23mm x 23mm x 43mm)
• Waga przedmiotu: Approximately 1.8 Ounces (0.11 Pounds) per cell
• Numer modelu: 6543873008
• Kod UPC: 844949016292

Image 9.1: Approximate dimensions of the Tenergy Sub C NiCd battery with tabs.

10. Gwarancja i wsparcie

For warranty information, technical support, or further inquiries regarding your Tenergy products, please visit the official Tenergy webodwiedź witrynę lub skontaktuj się bezpośrednio z działem obsługi klienta.

You can also visit the Tenergy Store on Amazon for product details and support resources:

Visit the Tenergy Store