B008MMW998

Generic Vacuum Cleaner Cord Hook Wrap Instruction Manual

Wstęp

This manual provides instructions for the installation, operation, and maintenance of your Generic Vacuum Cleaner Cord Hook Wrap. These cord hooks are designed to manage and store the power cord of your vacuum cleaner, particularly useful for commercial machines with large, heavy-duty, long cords.

The package includes two cord wraps/hooks and screws for installation.

Produkt ponadview

Two black vacuum cleaner cord hooks and four screws

Rysunek 1: Generic Vacuum Cleaner Cord Hooks and Screws. This image displays two black plastic cord hooks, designed to wrap and secure vacuum cleaner power cords. Below the hooks are four metal screws, intended for mounting the hooks.

Główne cechy

  • Designed for vacuum cleaner cord management.
  • Includes 2 cord wraps/hooks.
  • Comes with screws for installation.
  • Suitable for commercial machines with large, heavy-duty, long cords.

Konfiguracja i instalacja

Follow these steps to properly install your vacuum cleaner cord hooks.

  1. Określ miejsce montażu: Choose a suitable, sturdy surface on your vacuum cleaner or a nearby wall where the cord hooks can be securely attached. Ensure the location allows for easy cord wrapping and unwrapping without obstruction.
  2. Pozycja haka: Place one cord hook in the desired position. Mark the screw holes with a pencil or marker.
  3. Wywierć otwory pilotażowe (opcjonalne, ale zalecane): For easier installation and to prevent material splitting, especially on plastic or wood, drill small pilot holes at the marked spots. Use a drill bit slightly smaller than the screw diameter.
  4. Zabezpiecz hak: Align the hook with the pilot holes (if drilled) and insert the provided screws. Use a screwdriver to tighten the screws until the hook is firmly attached. Notatka: If the provided screws are too long for your specific application, you may need to use shorter, appropriate sheet metal screws (as noted by some users).
  5. Repeat for Second Hook: Install the second cord hook following the same procedure, positioning it appropriately to allow for effective cord wrapping.
  6. Stabilność testu: Gently pull on the installed hooks to ensure they are securely fastened before wrapping the vacuum cleaner cord.

Instrukcja obsługi

Once installed, the cord hooks are simple to use for cord management.

  1. Wrap the Cord: Begin by wrapping the vacuum cleaner's power cord around the installed hooks. Start from one end and coil the cord neatly.
  2. Zabezpiecz przewód: Ensure the cord is snugly wrapped around both hooks to prevent it from unraveling or dragging.
  3. Unwrap for Use: To use the vacuum cleaner, simply unwrap the cord from the hooks.

Konserwacja

The cord hooks require minimal maintenance.

  • Czyszczenie: Okresowo przecieraj haki reklamąamp szmatką, aby usunąć kurz lub zanieczyszczenia.
  • Kontrola: Occasionally check the screws to ensure they remain tight. Retighten if necessary.
  • Kontrola uszkodzeń: Inspect the hooks for any signs of cracks or damage. Replace if significantly damaged to ensure proper cord retention.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Hooks are loose after installation.Screws not tightened sufficiently or pilot holes too large.Retighten screws. If still loose, consider using slightly larger screws or relocating the hook to a more secure spot.
Provided screws are too long.Mounting surface is thin or requires shorter fasteners.Obtain shorter sheet metal screws of appropriate gauge for your specific application.
Cord does not stay wrapped.Improper wrapping technique or hooks are too far apart.Ensure the cord is wrapped snugly. Adjust the position of the hooks if possible to optimize cord retention.

Specyfikacje

  • Nazwa produktu: Vacuum Cleaner Cord Hook Wrap
  • Marka: Ogólny
  • Model: B008MMW998
  • Dołączony: 2 Cord Wraps/Hooks, Screws
  • Tworzywo: Plastic (inferred from product image)
  • Zgodność: Works with various vacuum cleaner models, including Panasonic MC-UG589, MC-UG585, MC-UG583, MC-UG581, MC-UG383, Carpet Pro CPU-1, CPU-2, CPU-1T.
  • Zamiar: Cord management for commercial machines with large, heavy-duty long cords.

Gwarancja i wsparcie

Specific warranty information for this Generic product is not provided in the product details. For any issues or support inquiries, please refer to the seller or retailer from whom the product was purchased.

Aby uzyskać ogólne informacje o produkcie, odwiedź stronę Generic brand page on Amazon.

Documents - B008MMW998 – B008MMW998

brak odpowiednich dokumentów