Produkt ponadview
The Moen 2580 Posi-Temp Pressure Balancing Shower Valve is designed to provide consistent water temperature by balancing hot and cold water pressure. This valve features a durable brass construction and 1/2-inch crimp ring PEX connections. It is built on the Moen M-PACT common valve system, allowing for future trim updates without altering the plumbing. The valve includes an adjustable temperature limit stop to control maximum hot water temperature and utilizes a 1222 cartridge.
Konfiguracja i instalacja
Proper installation is crucial for the optimal performance of your Moen Posi-Temp valve. This valve is designed for 1/2-inch crimp PEX inlets and includes four ports: two inlets for hot and cold water, one outlet for the shower, and one outlet for the tub. For shower-only installations, the tub outlet must be capped.
- System zaworów: The valve is part of the Moen M-PACT common valve system, which simplifies future trim changes.
- Znajomości: Ensure all connections are secure and meet local plumbing codes. The valve accommodates 1/2-inch crimp ring PEX connections.
- Temperature Limit Stop: Before installing decorative trim, set the adjustable temperature limit stop to prevent scalding by controlling the maximum hot water temperature.
- Nabój: The 1222 cartridge is integral to the valve's pressure balancing function and accommodates back-to-back installations.
Rysunek 1: This diagram provides detailed specifications for the Moen Posi-Temp valve, including its brass construction, pressure balancing mechanism, 1/4 turn stops, and critical installation dimensions for rough-in, such as plaster ground and wall opening measurements.
Rysunek 2: This diagram illustrates how the Moen Posi-Temp valve is used in shower and tub applications, its installation features, and benefits such as pressure balancing, temperature limit stop, and compatibility with the M-PACT common valve system.
Instrukcja obsługi
The Posi-Temp valve is designed for ease of use and consistent performance. Once installed, operate the valve using the compatible Moen trim kit (sold separately).
- Kontrola temperatury: The Posi-Temp technology automatically balances hot and cold water pressure to maintain a consistent water temperature, preventing sudden temperature changes.
- Kontrola przepływu: The valve features 1/4 turn stops for water flow control.
- Adjustable Temperature Limit: The maximum hot water temperature can be adjusted using the temperature limit stop located on the valve. Refer to the trim kit instructions for specific adjustment procedures.
Konserwacja
Regular maintenance ensures the longevity and optimal performance of your Moen Posi-Temp valve.
- Czyszczenie: Clean the exterior of the valve and associated trim with a soft cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that can damage the finish.
- Wymiana wkładu: If you experience issues with water temperature regulation or flow, the 1222 cartridge may need to be inspected or replaced. Consult a qualified plumber or Moen's customer support for assistance.
- Odcięcie wody: Always turn off the main water supply before performing any maintenance or repairs on the valve.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Niezmienna temperatura wody | Faulty Posi-Temp cartridge (1222). | Replace the 1222 cartridge. Ensure the temperature limit stop is correctly set. |
| Niski przepływ wody | Debris in the valve or cartridge. Partially closed shut-off valves. | Flush the valve or clean/replace the cartridge. Ensure all supply valves are fully open. |
| Water Leaks from Valve | Loose connections. Damaged O-rings or cartridge. | Tighten connections. Inspect and replace O-rings or the 1222 cartridge if damaged. |
| Brak ciepłej i zimnej wody | Supply line shut-off valve closed. Cartridge issue. | Check if hot/cold supply valves are open. Inspect or replace the 1222 cartridge. |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | 2580 |
| Marka | Moen |
| Tworzywo | Brass (Metal) |
| Wykończenie zewnętrzne | Mosiądz |
| Typ zaworu | Zawór równoważący ciśnienie |
| Typ połączenia wlotowego | Cross Linked Polyethylene (PEX) |
| Typ przyłącza wyjściowego | PEX |
| Typ złącza | Fałda |
| Rozmiar przyłącza wylotowego | 0.5 cali |
| Liczba portów | 4 (Hot, Cold, Shower, Tub) |
| Pozycja Wymiary (dł. x szer. x wys.) | 7 x 2.75 x 6 cala |
| Specyfikacja Met | ASSE |
| Zawarte komponenty | Zawór |
| UPC / GTIN | 026508233566 |
Gwarancja i wsparcie
Moen provides comprehensive warranty coverage for this product.
- Ograniczona dożywotnia gwarancja: The Moen 2580 Posi-Temp valve is backed by Moen's Limited Lifetime Warranty against leaks, drips, and finish defects for the original consumer purchaser.
- Gwarancja handlowa: A 5-year warranty is provided for commercial installations.
- Obsługa klienta: For technical assistance, warranty claims, or to purchase replacement parts, please visit the official Moen webodwiedź witrynę lub skontaktuj się z obsługą klienta Moen.