Selve i-R Receive Radio Receiver Instruction Manual

1. Wprowadzenie

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Selve i-R Receive radio receiver. Please read this manual carefully before installation and operation to ensure proper function and safety.

The Selve i-R Receive is designed to receive radio signals from Selve radio transmitters operating at 868 MHz, enabling control of connected devices such as roller shutters or awnings.

2. Instrukcje bezpieczeństwa

Zawsze przestrzegaj następujących środków ostrożności:

• Instalację musi wykonać wykwalifikowany elektryk, zgodnie z lokalnymi przepisami i regulacjami elektrycznymi.
• Przed przystąpieniem do prac instalacyjnych, konserwacyjnych lub rozwiązywania problemów należy odłączyć zasilanie.
• Nie narażaj urządzenia na działanie wilgoci ani ekstremalnych temperatur.
• Zapewnij odpowiednie uziemienie, aby zapobiec porażeniu prądem.
• Nie otwieraj obudowy urządzenia. Wewnątrz nie ma żadnych części, które mogłyby zostać naprawione przez użytkownika.

3. Koniec produktuview

The Selve i-R Receive is a compact radio receiver designed for integration into electrical systems. It features terminals for input and output connections and a programming button.

Rycina 3.1: Przód view of the Selve i-R Receive showing input/output terminals and programming button.

Rysunek 3.2: Tył view of the Selve i-R Receive indicating the programming button location.

Rysunek 3.3: Kątowy view of the Selve i-R Receive, highlighting its compact design.

Figure 3.4: The Selve i-R Receive unit alongside its packaging.

Rysunek 3.5: Dół view of the Selve i-R Receive, showing the "PROG" label and button.

Rysunek 3.6: Strona view of the Selve i-R Receive, illustrating the antenna cable exit point.

Figure 3.7: Functional example diagram showing the Selve i-R Receive connected to a roller shutter and controlled by an i-R Transmit unit.

4. Specyfikacje techniczne

5. Konfiguracja i instalacja

Ważny: Installation must be carried out by a qualified electrician. Disconnect the main power supply before beginning installation.

5.1 połączeń przewodów

Refer to the wiring diagram on the device and in Figure 3.7 for correct connections. The terminals are typically labeled as follows:

• W: Power input (L - Live, N - Neutral).
• NA ZEWNĄTRZ: Output to the motor/device (e.g., for roller shutters: Up, Down, Neutral).
• Sprawdź, czy wszystkie połączenia są solidne i właściwie zaizolowane.

5.2 Montaż

The i-R Receive is designed for flush-mounted installation behind a switch or in a junction box. Ensure adequate space for ventilation and wiring.

5.3 Umiejscowienie anteny

The integrated antenna should be positioned freely and not be coiled or placed near large metal objects, which could interfere with signal reception.

6. Instrukcja obsługi

6.1 Parowanie z nadajnikiem

To control the i-R Receive, it must first be paired with a compatible Selve radio transmitter (e.g., Selve i-R Transmit). The programming button is located on the back of the unit (see Figure 3.2 and 3.5).

1. Ensure the i-R Receive is powered on.
2. Press the programming button on the i-R Receive briefly (approx. 1 second). The connected device may briefly react (e.g., a short movement of a roller shutter) to indicate it is in pairing mode.
3. Within approximately 10 seconds, press the desired "UP" or "DOWN" button on your Selve radio transmitter.
4. The connected device should react again, confirming successful pairing.
5. Repeat for additional transmitters if desired.

6.2 Podstawowa obsługa

Once paired, the i-R Receive will respond to commands from the linked Selve radio transmitter:

• Pressing the "UP" button on the transmitter will activate the 'Up' output.
• Pressing the "DOWN" button on the transmitter will activate the 'Down' output.
• A "STOP" or middle button (if available on the transmitter) will halt the current movement.

7. Konserwacja

The Selve i-R Receive is designed for maintenance-free operation. No regular maintenance is required.

• Czyszczenie: If necessary, gently wipe the exterior with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Kontrola: Periodically check wiring connections for looseness or damage. Ensure the device is not exposed to excessive heat or moisture.

Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic operation.

8. Rozwiązywanie Problemów

9. Gwarancja i wsparcie

Selve products are manufactured to high quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official Selve webstrona.

For technical support or service inquiries, please contact your authorized Selve dealer or the Selve customer service department. When contacting support, please have your product model (i-R Receive, 29 87 71) and ASIN (B007E5L328) ready.

Selve GmbH & Co. KG
Werdohler Landstraße 286
58513 Lüdenscheid
Niemcy

Note: Contact details are for informational purposes and may vary. Please refer to the official Selve webna tej stronie znajdziesz najbardziej aktualne dane kontaktowe.

10. Utylizacja

Do not dispose of electrical devices with household waste. In accordance with the European Directive on Waste Electrical and Electronic Equipment (WEEE), electrical and electronic equipment must be collected separately and recycled in an environmentally sound manner. Contact your local authorities for information regarding proper disposal and recycling facilities.