Instrukcja obsługi bezprzewodowego systemu gitarowego Nady U-800 GT UHF 800-Channel PLL

Wstęp

Thank you for choosing the Nady U-800 GT UHF 800-Channel PLL Synthesized Wireless Guitar System. This system provides reliable, high-quality wireless audio transmission for your guitar or other instrument, offering freedom of movement on stage or in the studio. With 800 selectable UHF channels, it ensures clear, interference-free performance.

Ważne informacje dotyczące bezpieczeństwa

Please read and follow all instructions carefully before operating this device. Keep this manual for future reference.

• Nie wystawiać urządzenia na działanie deszczu i wilgoci.
• Nie umieszczać w pobliżu źródeł ciepła, takich jak grzejniki, kratki wentylacyjne, piece lub inne urządzenia (w tym amp(lifiers) wytwarzające ciepło.
• Stosować wyłącznie dodatki/akcesoria wskazane przez producenta.
• Wszelkie czynności serwisowe należy powierzyć wykwalifikowanemu personelowi serwisowemu. Serwis jest wymagany, gdy urządzenie zostało w jakikolwiek sposób uszkodzone.
• Zapewnij odpowiednią wentylację i nie blokuj żadnych otworów wentylacyjnych.
• Baterie należy utylizować zgodnie z lokalnymi przepisami.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:

• U-800 GT UHF Wireless Receiver
• UB-800 UHF Wireless Transmitter
• Instrument Cable (1/4" to mini XLR)
• Zasilacz (do odbiornika)
• 2 baterie AA (do nadajnika)
• Instrukcja obsługi (ten dokument)

Image: The Nady U-800 GT wireless receiver and UB-800 bodypack transmitter, along with the instrument cable, illustrating the main components of the system.

Image: The included power adapter, used to power the U-800 GT wireless receiver.

Produkt ponadview

U-800 GT Wireless Receiver

Image: Front panel of the U-800 GT receiver, showing the power button, display, and channel selection controls.

• Przycisk zasilania: Włącza/wyłącza odbiornik.
• Anteny: For receiving UHF signals from the transmitter.
• Wyświetlacz LCD: Shows channel number, frequency, RF/AF levels, and battery status.
• Przyciski GÓRA/DÓŁ: Do wyboru kanałów.
• Przycisk MENU: For accessing system settings.
• ASC™ (Automatic Channel Scan): Automatically finds clear channels.

Image: Rear panel of the U-800 GT receiver, displaying the unbalanced out, DC input, volume control, and balanced out connections.

• WEJŚCIE DC: Do podłączenia zasilacza.
• UNBALANCED OUT (1/4" Jack): Standardowe wyjście instrumentu.
• BALANCED OUT (XLR): Professional audio output for mixers/PAs.
• TOM: Steruje poziomem wyjściowym dźwięku.

UB-800 UHF Wireless Transmitter

Image: The UB-800 bodypack transmitter, showing its compact design and antenna.

Image: The UB-800 bodypack transmitter with the instrument cable connected, ready for use with a guitar.

• Antena: For transmitting UHF signals to the receiver.
• Input Jack (Mini XLR): For connecting the instrument cable.
• Dioda zasilania/akumulatora: Indicates power on and low battery status.
• Przycisk zasilania: Włącza/wyłącza nadajnik.
• Gain Control: Adjusts input sensitivity for different instruments.
• Komora baterii: Mieści 2 baterie AA.

Instrukcje konfiguracji

1. Umieszczenie odbiornika: Place the U-800 GT receiver in a location free from obstructions and away from other electronic devices that may cause interference. Ensure the antennas are fully extended and positioned vertically.
2. Podłącz zasilanie: Connect the supplied power adapter to the DC INPUT on the rear of the receiver and plug it into an AC outlet.
3. Podłącz wyjście audio:
   • For standard instrument amplifiers or pedals, use a 1/4" TS cable (not included) from the UNBALANCED OUT jack to your ampwejście lifiera.
   • For professional mixers or PA systems, use an XLR cable (not included) from the BALANCED OUT jack to a balanced input on your mixer.
4. Instalacja baterii nadajnika: Open the battery compartment on the UB-800 transmitter and insert 2 x AA batteries, observing correct polarity. Close the compartment.
5. Connect Instrument to Transmitter: Connect one end of the supplied instrument cable (1/4" jack) to your guitar or instrument, and the mini XLR end to the INPUT jack on the UB-800 transmitter.
6. Włącz odbiornik: Press the POWER button on the receiver. The LCD display will illuminate.
7. Wybierz kanał: Use the ASC™ (Automatic Channel Scan) function by pressing and holding the MENU button for 3 seconds, or manually select a channel using the UP/DOWN buttons. Choose a clear channel with no interference.
8. Włącz nadajnik: Turn on the UB-800 transmitter. The Power/Battery LED should illuminate.
9. Sync Transmitter and Receiver: Ensure the transmitter and receiver are set to the same channel. The receiver's RF indicator should light up, indicating a strong signal.
10. Dostosuj wzmocnienie: Play your instrument and adjust the GAIN control on the transmitter to prevent clipping (distortion) while ensuring a strong signal. Adjust the VOLUME control on the receiver for the desired output level.

Instrukcja obsługi

Wybór kanału

The U-800 GT system offers 800 selectable UHF channels to avoid interference. It is crucial to select a clear channel before each use, especially in environments with multiple wireless systems.

• Automatic Channel Scan (ASC™): Press and hold the MENU button on the receiver for approximately 3 seconds. The receiver will scan for the clearest available channel and automatically set itself to that frequency.
• Ręczny wybór kanału: Press the UP or DOWN buttons on the receiver to cycle through available channels. Observe the RF indicator on the display; a strong, steady signal indicates a good channel.
• Once a channel is selected on the receiver, ensure the transmitter is also set to the exact same channel. Refer to the transmitter's manual for specific channel setting procedures if not automatically synced.

Zarządzanie baterią

The UB-800 transmitter operates on 2 x AA batteries. The Power/Battery LED on the transmitter indicates battery status:

• Zielony: Normalna praca.
• Red (or flashing red): Low battery. Replace batteries immediately to avoid signal loss.

Always carry spare batteries, especially for live performances.

Optymalizacja wydajności

• Maintain a clear line of sight between the transmitter and receiver antennas.
• Avoid placing the receiver near large metal objects or other wireless devices.
• Keep the transmitter and receiver within the recommended operating range (typically up to 100 meters / 300 feet, depending on environment).
• Adjust the receiver's VOLUME control to match the input sensitivity of your ampmikser lub urządzenie spulchniające.

Konserwacja

• Czyszczenie: Use a soft, dry cloth to clean the exterior of the receiver and transmitter. Do not use liquid cleaners or solvents.
• Przechowywanie baterii: If the transmitter will not be used for an extended period, remove the batteries to prevent leakage and damage.
• Anteny: Handle antennas carefully. Do not bend them excessively or apply undue force.
• Pielęgnacja kabli: Store the instrument cable without sharp bends or kinks to prolong its life.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

Nady Systems, Inc. warrants this product to be free from defects in material and workmanship for a period of one year from the date of original purchase. This warranty is non-transferable and applies only to the original purchaser.

Co jest objęte: Repair or replacement of defective parts and labor.

Czego nie obejmuje: Damage caused by accident, misuse, abuse, unauthorized modification, improper installation, power surges, or normal wear and tear. Batteries are not covered by this warranty.

Aby uzyskać usługę: If your product requires service, please contact Nady Systems, Inc. customer support. Do not attempt to repair the unit yourself. Proof of purchase is required for all warranty claims.

For further assistance or technical support, please visit the official Nady Systems webstronie lub skontaktuj się z działem obsługi klienta.