AMS 5132/1

AMS 5132/1 Radio-Controlled Pendulum Wall Clock

Instrukcja obsługi

Wstęp

Thank you for choosing the AMS 5132/1 Radio-Controlled Pendulum Wall Clock. This clock combines classic design with modern radio-controlled technology for precise timekeeping. Crafted from walnut lacquered solid wood, it is designed for indoor use. Please read this manual carefully before setup and operation to ensure proper function and longevity of your clock.

AMS 5132/1 Radio-Controlled Pendulum Wall Clock, front view

Obraz: Przód view of the AMS 5132/1 Radio-Controlled Pendulum Wall Clock, showcasing its round dial, analog display, and walnut wood finish.

Informacje dotyczące bezpieczeństwa

  • Przechowuj baterie w miejscu niedostępnym dla dzieci.
  • Nie wystawiaj zegara na działanie ekstremalnych temperatur, bezpośredniego światła słonecznego i wysokiej wilgotności.
  • Avoid using abrasive cleaners on the wood or clock face.
  • Upewnij się, że zegar jest solidnie zamontowany, aby zapobiec jego upadkowi.
  • Zużytych baterii należy pozbywać się w sposób odpowiedzialny, zgodnie z lokalnymi przepisami.

Zawartość opakowania

Proszę sprawdzić, czy w paczce znajdują się następujące elementy:

  • AMS 5132/1 Radio-Controlled Pendulum Wall Clock
  • Pendulum rod and bob
  • Instrukcja obsługi (ten dokument)

Uwaga: Baterie nie są dołączone do zestawu i należy je zakupić osobno.

Organizować coś

  1. Rozpakowywanie: Carefully remove the clock and all components from the packaging. Retain packaging for future transport or storage.
  2. Montaż baterii:
    • Znajdź komorę baterii z tyłu mechanizmu zegara.
    • Włóż wymagane baterie (zazwyczaj 1 x AA, nie ma ich w zestawie) zgodnie z oznaczeniami biegunowości (+/-).
    • Zamknij pokrywę komory baterii.
  3. Montaż wahadła:
    • Carefully attach the pendulum rod to the hook or slot provided on the clock mechanism, usually located below the movement.
    • Ensure the pendulum hangs freely and does not touch the clock casing.
  4. Initial Time Synchronization (Radio Control):
    • Once batteries are installed, the clock hands will automatically move to the 12 o'clock position and begin searching for the radio signal. This process can take several minutes to an hour.
    • Place the clock in an area with good reception, away from electronic devices that may cause interference.
    • The clock will automatically set itself to the correct time once the signal is received.
    Close-up of a clock face showing 'RADIO CONTROLLED' text

    Image: Detail of a clock face indicating the 'RADIO CONTROLLED' feature, essential for automatic time synchronization.

  5. Montaż zegara:
    • Select a suitable wall location for mounting. Ensure the wall can support the weight of the clock.
    • Use appropriate wall anchors and screws (not included) for secure installation.
    • Hang the clock securely on the wall.

Operacyjny

  1. Automatyczna synchronizacja czasu: The clock automatically receives a radio signal to ensure accurate timekeeping, including adjustments for Daylight Saving Time. This typically occurs once a day, usually in the early morning hours.
  2. Ruch wahadła: Gently push the pendulum to start its swing. It should continue to swing rhythmically as long as the clock is powered and functioning correctly.
  3. Manual Time Adjustment (if necessary): In rare cases where the radio signal is consistently weak or unavailable, some models may offer a manual adjustment button (often labeled 'SET' or 'M.SET') on the back. Refer to specific markings on your clock's mechanism. Pressing this button usually advances the minute hand. Hold to move hands quickly. Release when close to the desired time and press repeatedly for fine adjustments. The clock will attempt to resynchronize with the radio signal after manual adjustment.

Konserwacja

  • Czyszczenie: Wipe the wood casing with a soft, dry cloth. For the clock face, use a clean, lint-free cloth. Do not use harsh chemicals or abrasive materials.
  • Wymiana baterii: Replace batteries annually or when the clock hands stop moving or the pendulum stops swinging. Always replace all batteries at the same time with new ones of the same type.
  • Opieka ogólna: Avoid placing the clock in areas with extreme temperature fluctuations or high humidity, as this can affect the wood and the clock mechanism.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Zegar nie działaWyczerpane lub nieprawidłowo włożone baterieWymień baterie, zwracając uwagę na prawidłową biegunowość.
Wyświetlany jest nieprawidłowy czasPoor radio signal receptionMove the clock to a different location, away from electronic interference. Allow time for re-synchronization.
Wahadło się nie huśtaPendulum not properly installed or obstructedEnsure the pendulum is correctly hooked and swings freely without touching the casing. Gently push to start.
Clock loses time or gains timeWeak radio signal or battery issueCheck battery strength. Relocate the clock for better signal reception.

Specyfikacje

  • Marka: AMS
  • Numer modelu: 5132/1
  • Kolor: Orzech włoski
  • Tworzywo: Drewno
  • Typ wyświetlacza: Analog
  • Styl: Klasyczny
  • Kształt: Okrągły
  • Stosowanie: Wnętrz
  • Materiał ramy: Drewno
  • Baterie w zestawie: NIE
  • Typ montażu: Montaż ścienny

Gwarancja i wsparcie

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official AMS webAby uzyskać dalszą pomoc, odwiedź naszą witrynę.

© 2026 AMS. Wszelkie prawa zastrzeżone.