Beurer PM80 Professional Heart Rate Monitor

Produkt ponadview

The Beurer PM80 is a professional heart rate monitor designed for accurate and reliable heart rate measurement during physical activity. It features an ECG-precise measurement system and digital transmission for interference-free data. This device is suitable for various fitness levels and includes functions for tracking training zones, calorie consumption, and fat burning.

This image displays the Beurer PM80 Professional Heart Rate Monitor. The watch features a sleek stainless steel casing and a black strap. Its digital display clearly shows a heart rate of 138, the time 19:45:57, and the date Friday, April 12th. Buttons labeled 'START/STOP', 'OPTION/SET', and 'MENU' are visible around the bezel, indicating its functional design for fitness tracking.

Główne cechy:

• ECG-precise heart rate measurement for accurate readings.
• Interference-free digital transmission for reliable data.
• PC interface for data download and analysis.
• Waterproof up to 50 meters, suitable for swimming (note: pulse measurement underwater not guaranteed).
• Displays average and maximum heart rate during workouts.
• Includes a digital chest strap with a flexible design.
• Features individual training area and alarm functions.
• Calculates calorie consumption and fat burning.
• Integrated stopwatch, alarm, and display illumination.

Organizować coś

1. Instalacja baterii

The Beurer PM80 watch and chest strap require batteries for operation. The watch uses two CR2032 3V batteries, which are typically included. Ensure correct polarity when inserting the batteries.

1. Locate the battery compartment on the back of the watch and the chest strap.
2. Use a small coin or appropriate tool to open the battery cover.
3. Insert the CR2032 batteries, observing the '+' and '-' markings.
4. Securely close the battery cover to ensure water resistance.

2. Początkowa konfiguracja i parowanie

Upon first use or after battery replacement, you may need to set the time, date, and personal data. The watch will automatically attempt to pair with the chest strap when a heart rate signal is detected.

1. Naciśnij MENU przycisk umożliwiający dostęp do ustawień.
2. Poruszaj się po opcjach za pomocą OPTION/SET przycisk.
3. Set the current time, date, and your personal data (e.g., age, weight, height) for accurate calorie and fat burn calculations.
4. Moisten the electrodes on the chest strap with water or electrode gel.
5. Position the chest strap firmly around your chest, directly below your pectoral muscles.
6. The watch should display your heart rate once a stable connection is established.

Instrukcja obsługi

Podstawowa nawigacja

• MENU: Enters the main menu, navigates between main functions.
• OPTION/SET: Selects options, confirms settings, or moves to the next setting.
• ZACZĄĆ ZAKOŃCZYĆ: Starts or stops a training session, or confirms a selection.

Pomiar tętna

Ensure the chest strap is correctly worn and moistened. Your heart rate will be displayed automatically on the watch face when a signal is detected.

Rozpoczęcie sesji szkoleniowej

1. Na wyświetlaczu czasu naciśnij START/STOP to begin a new training session.
2. The watch will start recording your heart rate, duration, and other relevant metrics.
3. During the session, you can cycle through different display modes (e.g., current heart rate, calories burned, lap times) using the OPTION/SET przycisk.
4. To mark a lap, press the designated button (refer to your specific model's button layout, often OPTION/SET during a session).
5. To end the session, press START/STOP again. The session data will be saved.

Using Training Zones

The PM80 allows you to define individual training zones. If your heart rate falls outside the set zone, an alarm will sound.

1. Access the training zone settings via the MENU.
2. Set your desired minimum and maximum heart rate values for your training.
3. Activate the training zone alarm if desired.

Transfer danych do komputera

The PM80 includes a PC interface and data cable for transferring your training data to a computer. Use the EASYFIT software (available for download) to plan, control, and manage your fitness and weight.

1. Install the EASYFIT software on your computer.
2. Connect the watch to your PC using the provided data cable.
3. Follow the instructions in the EASYFIT software to download and analyze your training data.

Konserwacja

Czyszczenie

• Regularnie czyść zegarek i pasek na klatkę piersiową miękką szmatką.amp płótno.
• Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
• After swimming or heavy sweating, rinse the chest strap with fresh water to prevent salt buildup.

Wymiana baterii

When the battery indicator appears on the display, replace the batteries promptly to ensure continued accurate operation. Refer to the 'Setup' section for battery installation instructions.

Składowanie

Przechowuj urządzenie w chłodnym i suchym miejscu, gdy nie jest używane. Unikaj ekstremalnych temperatur i bezpośredniego światła słonecznego.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

Beurer products are manufactured to high quality standards and are designed for reliable operation. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Beurer webstrona.

If you encounter any issues or require technical assistance, please contact Beurer customer support. You can often find contact information on the official Beurer webna stronie internetowej lub za pośrednictwem sprzedawcy, u którego zakupiłeś produkt.

Więcej informacji znajdziesz na stronie Sklep Beurer na Amazon.