Byron BY301

Byron BYR301 Wireless Door Chime Kit Instruction Manual

Model: BY301

1. Wprowadzenie

Dziękujemy za zakupasing the Byron BYR301 Wireless Door Chime Kit. This kit provides a convenient and reliable solution for your home or office, featuring a portable chime unit with an optional flashing light and a wireless push button. This manual contains important information regarding the installation, operation, and maintenance of your new door chime kit. Please read these instructions carefully before use and retain them for future reference.

2. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

  • 1 x Portable Chime Unit
  • 1 x bezprzewodowy przycisk
  • 1 x CR2032 Battery (for Push Button)
  • Mounting Hardware (screws, adhesive pad)
  • Instrukcja obsługi
Byron BYR301 Wireless Door Chime Kit components: portable chime unit, wireless push button, and packaging.

Figure 2.1: Package contents including the chime unit, push button, and packaging.

3. Informacje dotyczące bezpieczeństwa

  • Do not expose the chime unit or push button to extreme temperatures, direct sunlight, or moisture.
  • Use only the specified battery types. Incorrect battery types may cause damage or explosion.
  • Baterie należy przechowywać poza zasięgiem dzieci. W przypadku połknięcia natychmiast zasięgnij porady lekarza.
  • Nie próbuj samodzielnie otwierać ani naprawiać urządzeń. Wszelkie prace serwisowe zleć wykwalifikowanemu personelowi.
  • Dispose of old batteries and electronic devices responsibly, following local regulations.

4. Koniec produktuview

Familiarize yourself with the components of your Byron BYR301 Wireless Door Chime Kit.

Diagram of Byron BYR301 Wireless Door Chime Kit showing portable unit with volume control, high quality speaker, 8 melodies, flashing light, battery compartment for 3 C batteries, and bell push with push button.

Figure 4.1: Labeled diagram of the portable chime unit and wireless push button.

4.1. Portable Chime Unit Features

  • High Quality Speaker: For clear sound output.
  • 8 melodii: Select from a variety of chime sounds.
  • Regulacja głośności: Adjust the chime volume (4 levels).
  • Migające światło: Alert wizualny o przychodzących gościach.
  • Komora baterii: Requires 3 x C batteries (not included).

4.2. Wireless Push Button Features

  • Naciśnij przycisk: Activates the chime unit.
  • Bateria: Zasilany 1 baterią CR2032 (w zestawie).
  • Odporność na warunki atmosferyczne: Nadaje się do użytku na zewnątrz.

5. Konfiguracja

5.1. Installing Batteries in the Chime Unit

  1. Locate the battery compartment on the underside of the portable chime unit.
  2. Otwórz pokrywę komory baterii.
  3. Insert 3 x C batteries (LR14, not included) according to the polarity markings (+/-) inside the compartment.
  4. Dokładnie zamknij pokrywę komory baterii.

5.2. Installing Battery in the Push Button

  1. The CR2032 battery is typically pre-installed. If not, open the push button casing (usually by gently prying it open with a small screwdriver).
  2. Włóż baterię CR2032 biegunem dodatnim (+) skierowanym do góry.
  3. Zamknij casing bezpiecznie.
Close-up of the wireless push button, showing the grey push area.

Figure 5.1: Wireless Push Button.

5.3. Montaż przycisku

The push button is designed for outdoor use and can be mounted using screws or the provided adhesive pad.

  1. Choose a suitable location near your door, ensuring it is easily accessible to visitors.
  2. Używanie śrub: Mark the desired drilling points, drill pilot holes, and secure the push button base with the provided screws. Snap the front cover back on.
  3. Używanie podkładki samoprzylepnej: Clean the mounting surface thoroughly. Peel off the protective backing from the adhesive pad and firmly press the push button onto the surface for at least 30 seconds.
  4. Ensure the push button is mounted vertically for optimal performance.
Wireless push button mounted on a brick wall next to a white door.

Rysunek 5.2: Example of push button installation.

5.4. Pairing (Automatic Learning)

The Byron BYR301 features automatic learning. Typically, the push button and chime unit are pre-paired at the factory. If they do not connect automatically, or if you are adding another push button, follow these steps:

  1. Ensure both the chime unit and push button have fresh batteries installed.
  2. Press and hold the pairing button (refer to the chime unit diagram for location, usually a small button or switch) on the chime unit until it emits a short sound or its indicator light flashes.
  3. Within 10 seconds, press the wireless push button. The chime unit should sound, indicating successful pairing.
  4. Test the connection by pressing the push button. The chime unit should sound.
Diagram illustrating the 100-meter open-air range between the chime unit and the push button.

Figure 5.3: Wireless range illustration (up to 100m in open air).

6. Instrukcja obsługi

6.1. Zmiana melodii

The chime unit offers 8 different melodies. To change the melody:

  • Locate the melody selection button on the chime unit (refer to Figure 4.1).
  • Press this button repeatedly to cycle through the available melodies. The chime unit will play each melody as you select it.
  • Stop pressing when you hear your desired melody.

6.2. Regulacja głośności

The chime unit has 4 volume levels. To adjust the volume:

  • Locate the volume control button on the chime unit (refer to Figure 4.1).
  • Press this button repeatedly to cycle through the volume levels (low, medium, high, extra loud).
  • Przestań naciskać, gdy osiągniesz pożądany poziom głośności.

6.3. Using the Flashing Light

The chime unit features an optional flashing light for a visual alert.

  • The flashing light activates automatically when the chime sounds.
  • There is typically no separate control for the flashing light; it operates in conjunction with the chime.

7. Konserwacja

7.1. Wymiana baterii

  • Jednostka dzwonka: Replace the 3 x C batteries when the chime sound becomes weak or the unit stops functioning. Follow the steps in Section 5.1.
  • Naciśnij przycisk: Replace the CR2032 battery when the chime unit no longer responds to the push button. Follow the steps in Section 5.2.
  • Always use fresh, high-quality batteries of the specified type.

7.2. Czyszczenie

  • Wytrzyj dzwonek i przycisk miękką, suchą ściereczką.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surfaces.
  • Ensure no moisture enters the units during cleaning.

8. Rozwiązywanie Problemów

Problem Możliwa przyczyna Rozwiązanie
Chime unit does not sound. Wyczerpane lub nieprawidłowo zainstalowane baterie w dzwonku.
Bateria w przycisku jest rozładowana lub nieprawidłowo zainstalowana.
Chime unit and push button are not paired.
Poza zakresem.
Replace C batteries in chime unit, ensuring correct polarity.
Replace CR2032 battery in push button, ensuring correct polarity.
Perform pairing procedure (Section 5.4).
Przesuń dzwonek bliżej przycisku.
Chime sounds intermittently. Niski poziom baterii.
Zakłócenia ze strony innych urządzeń bezprzewodowych.
Przeszkody między jednostkami.
Wymień baterie w obu urządzeniach.
Relocate chime unit or push button away from potential interference sources.
Ensure clear line of sight or fewer obstructions between units.
Flashing light does not work. Chime unit batteries are low or dead. Replace C batteries in the chime unit.

9. Specyfikacje

Funkcja Szczegół
Numer modelu BY301
Producent Byron
Zasilanie jednostki dzwonka 3 x C (LR14) batteries (not included)
Zasilanie przyciskiem Bateria 1 x CR2032 (w zestawie)
Zasięg bezprzewodowej Do 100 metrów (na otwartej przestrzeni)
Melodie 8
Poziomy głośności 4 (including extra loud)
Alert wizualny Optional Flashing Light
Wymiary (jednostka dzwonka) Około. 6 x 20 x 24 cm
Waga 240 gramów (cały zestaw)
Tworzywo Plastik casing
Orzecznictwo CE
Usage (Push Button) Plenerowy

10. Gwarancja i wsparcie

For detailed warranty information, please refer to the documentation included with your purchase or visit the official Byron website. If you encounter any issues not covered in the troubleshooting section, please contact Byron customer support for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.