Somfy Sunis Indoor Wirefree RTS Sun Sensor (9013707) Instruction Manual

Wstęp

The Somfy Sunis Indoor Wirefree RTS Sun Sensor is designed to automate motorized window coverings based on the intensity of sunlight. This device helps manage natural light and temperature within a room by automatically adjusting window coverings. This manual provides detailed instructions for installation, operation, and maintenance of your Sunis sensor.

Informacje dotyczące bezpieczeństwa

• Przed instalacją i użytkowaniem przeczytaj uważnie wszystkie instrukcje.
• Trzymaj urządzenie z dala od wilgoci i ekstremalnych temperatur.
• Nie próbuj samodzielnie otwierać ani naprawiać urządzenia. Wszelkie prace serwisowe zleć wykwalifikowanemu personelowi.
• Upewnij się, że bateria została włożona prawidłowo, zgodnie z oznaczeniami biegunów.

Produkt ponadview

The Sunis Indoor Wirefree RTS Sun Sensor is a compact device featuring an integrated sun sensor and controls for programming and sensitivity adjustment.

Organizować coś

1. Instalacja

The Sunis sensor offers flexible installation options to suit your window environment.

• Window Sill Mount: Place the sensor directly on the window sill, ensuring it has a clear view słońca.
• Window Glass Mount: Use the provided suction cup to attach the sensor directly to the window glass. Ensure the glass surface is clean and dry for secure adhesion.

Position the sensor where it receives direct sunlight for optimal performance. Avoid placing it behind curtains or obstructions that would block sunlight.

2. Instalacja baterii

The Sunis sensor is wirefree and operates on batteries. To install or replace batteries:

1. Ostrożnie zdejmij tylną pokrywę czujnika.
2. Insert the required batteries (refer to product specifications for battery type) ensuring correct polarity.
3. Załóż ponownie tylną pokrywę.

3. Programming with RTS Motorized Window Coverings

To link the Sunis sensor with your Somfy RTS motorized window coverings:

1. Ensure your window covering motor is powered and functioning.
2. On your existing RTS remote control for the window covering, press and hold the programming button (usually a small button on the back) until the window covering jogs (moves slightly up and down).
3. Within 2 minutes, press the 'PROG' button on the back of the Sunis sensor (with the cover removed). The window covering will jog again, confirming successful pairing.
4. Repeat this process for all window coverings you wish to control with this sensor.

Operating the Sunis Sensor

1. Przełącznik włączania/wyłączania

The sensor features a convenient ON/OFF switch on the front. Slide the switch to the 'ON' position (sun icon) to activate sun detection and automatic operation. Slide it to 'OFF' to disable the sun sensor function.

2. Adjusting Sun Sensitivity

The sun sensitivity level determines the amount of sunlight required to trigger the automatic movement of your window coverings. To adjust:

1. Remove the back cover to access the controls.
2. Locate the adjustable sun sensitivity dial (marked with '+' and '-' symbols).
3. Turn the dial towards '+' for higher sensitivity (window coverings will react to less intense sunlight).
4. Turn the dial towards '-' for lower sensitivity (window coverings will require more intense sunlight to react).
5. Test the setting by exposing the sensor to varying light conditions.

3. Operating Mode Button

The 'MODE' button on the back of the sensor (under the cover) allows you to select the desired operating mode. Consult your specific window covering motor's manual for details on compatible modes and their functions. Typically, this button cycles through options like 'Open on Sun' or 'Close on Sun'.

Konserwacja

1. Czyszczenie

To ensure accurate sun detection, keep the sensor's surface clean. Use a soft, dry cloth to gently wipe away dust or smudges. Do not use abrasive cleaners or solvents.

2. Wymiana baterii

When the battery level is low, the L.E.D. indicator on the sensor may flash or the device may stop responding. Replace the batteries as described in the 'Battery Installation' section under Setup. Always use fresh batteries of the specified type.

Rozwiązywanie problemów

• Czujnik nie odpowiada: Check if the sensor is switched 'ON'. Verify battery charge and replace if necessary. Ensure the sensor is within range of the motorized window covering.
• Window covering not reacting to sun: Check the sun sensitivity setting. Increase sensitivity if needed. Ensure the sensor has a clear view of the sun and is not obstructed. Re-program the sensor to the window covering if the link was lost.
• Inconsistent operation: Ensure the sensor is placed in a stable location and not subject to movement. Verify that no external factors (e.g., shadows from trees, reflections) are interfering with sun detection.

Specyfikacje

Gwarancja

This Somfy product is covered by a 5-year warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Somfy webodwiedź witrynę lub skontaktuj się z działem obsługi klienta.

Wsparcie

For further assistance, technical support, or to inquire about replacement parts, please visit the official Somfy weblub skontaktuj się z działem obsługi klienta. Dane kontaktowe można zazwyczaj znaleźć na stronie internetowej Somfy. webwitryny lub opakowania produktu.

Webstrona: www.somfy.com