Rev-A-Shelf 5CW2-1222-CR 2-Tier Cabinet Pullout Cookware Organizer Instruction Manual

1. Wprowadzenie

This manual provides detailed instructions for the installation, operation, and maintenance of your Rev-A-Shelf 5CW2-1222-CR 2-Tier Cabinet Pullout Cookware Organizer. This product is designed to maximize kitchen cabinet space by providing an adjustable, heavy-duty wire storage solution for pots, pans, and lids.

Obraz 1.1: Koniecview of the Rev-A-Shelf 2-Tier Cookware Organizer highlighting key features like extension brackets, heavy-duty wire, 100 lb. rating, and easy installation.

2. Informacje dotyczące bezpieczeństwa

• Przed instalacją i użytkowaniem przeczytaj uważnie wszystkie instrukcje.
• Ensure the cabinet is stable and capable of supporting the weight of the organizer and its contents.
• Use appropriate tools and follow all safety precautions during installation.
• Do not overload the organizer beyond its specified weight capacity.
• Keep small parts and hardware away from children.
• Ensure all screws are securely tightened after installation.

3. Lista części

The Rev-A-Shelf 5CW2-1222-CR includes the following components:

• (1) Chrome two-tier cookware organizer frame with slides
• Adjustable wire dividers for lower basket
• Mounting hardware (screws, nuts, etc.)

Note: Optional door-mount brackets (5WB-DMKIT) are sold separately.

4. Instalacja

4.1. Pre-Installation: Measuring Your Cabinet

Accurate measurements are crucial for proper fit and function. Measure the minimum cabinet opening (MCO) for width, depth, and height. Consider any obstructions like door hinges or plumbing.

Image 4.1: Visual guide on how to measure width, depth, and height for both framed and frameless cabinets.

For a 15-inch base cabinet, the minimum cabinet opening required is 11.5"W x 22"D x 22"H for a face frame cabinet and 11.75"W x 22"D x 22"H for a frameless cabinet.

4.2. Potrzebne narzędzia

• Taśma miernicza
• Electric Drill + #2 Phillips Bit
• #2 Phillips Bit (manual screwdriver)
• Adjustable Wrench (for door mount kit, if applicable)

Image 4.2: Illustration of the tools required for the installation process.

4.3. Instalacja krok po kroku

1. Prepare Slides and Bracket: Remove slides from baskets. Attach bottom slides to the U-shaped bracket using 8 machine screws, starting with the circular hole.


Rysunek 4.3: Szczegółowy view of preparing the slides and attaching them to the U-shaped bracket.

2. Install Bracket in Cabinet: Attach top basket slides to the U-shaped bracket at one of the 3 height options using 8 machine screws. Slide the entire unit into the cabinet.


Image 4.4: Illustration of installing the assembled bracket unit into the cabinet.

3. Zabezpiecz jednostkę: Use 4 wood screws to attach the U-shaped unit to the cabinet floor. Push the rear metal sockets to the back of the cabinet and attach them using 4 wood screws.


Image 4.5: Demonstrates securing the organizer to the cabinet floor and rear.

4. Zakończ instalację: Re-engage the shelves into the slides carefully. Attach wire dividers to the lower basket for organizing cookware. Ensure everything is properly aligned for optimal performance.


Image 4.6: Shows the final steps of re-engaging shelves and installing dividers.

4.4. Optional Door Mounting Kit Installation

If you purchased the optional 5WB-DMKIT door mounting kit, refer to the video below for installation instructions. This kit allows the cabinet door to pull out with the organizer.

5. Działanie

The Rev-A-Shelf 2-Tier Cookware Organizer features independently operating shelves that glide smoothly on full-extension ball-bearing slides. This allows for easy access to all your pots, pans, and lids.

Image 5.1: The organizer fully extended from the cabinet, showcasing organized pots, pans, and lids.

5.1. Adjusting Dividers

The lower shelf includes adjustable wire dividers. These can be repositioned to accommodate various sizes of pots and pans, ensuring a custom fit for your cookware collection. Simply lift and move the dividers to your desired slot.

5.2. Zgodność naczyń kuchennych

The adjustable height of the shelves (16.75 to 19 inches) and the dividers allow for versatile storage. The top shelf can accommodate up to 7 lids, depending on their size.

Image 5.2: Guide illustrating the types and sizes of cookware compatible with the organizer at minimum and maximum tier heights.

6. Konserwacja

• Czyszczenie: Wipe the chrome-plated wire frame with a soft, damp szmatką. Unikaj środków czyszczących o działaniu ściernym i silnych środków chemicznych, które mogłyby uszkodzić wykończenie.
• Smarowanie: Periodically check the ball-bearing slides for smooth operation. If needed, apply a small amount of silicone-based lubricant to the slides.
• Szczelność: Regularly inspect all mounting screws and connections to ensure they remain tight. Re-tighten if any looseness is detected.

7. Rozwiązywanie Problemów

8. Specyfikacje

Image 8.1: Visual representation of the product's dimensions and adjustable height settings.

9. Gwarancja i pomoc techniczna

9.1. Informacje o gwarancji

This Rev-A-Shelf product comes with a Ograniczona dożywotnia gwarancja. Please retain your proof of purchase for warranty claims. For specific details regarding the warranty coverage, refer to the documentation included with your product or visit the official Rev-A-Shelf webstrona.

9.2. Obsługa klienta

For further assistance, technical support, or to inquire about replacement parts, please contact Rev-A-Shelf customer service. Contact information can typically be found on the product packaging or the official Rev-A-Shelf webstrona.