Wstęp
The Bunker Hill Wireless Security Driveway Alert System provides a simple and effective solution for monitoring activity around your property. This system consists of a wireless motion sensor and an indoor wireless receiver. When the infrared sensor detects motion, it sends a signal to the receiver, which then chimes to alert you. Designed for ease of use and installation, it offers peace of mind by notifying you of unexpected visitors or vehicles within its detection range.

Figure 1: The wireless motion sensor (right) and the indoor wireless receiver (left).
Informacje dotyczące bezpieczeństwa
- Przechowuj baterie w miejscu niedostępnym dla dzieci.
- Nie mieszaj starych i nowych baterii ani różnych typów baterii.
- Baterie należy utylizować zgodnie z lokalnymi przepisami.
- Ensure the outdoor sensor is mounted securely to prevent falling.
- This product is intended for security alerting purposes only and should not be used as a substitute for professional security systems.
Zawartość opakowania
- 1x Wireless Motion Sensor
- 1x Indoor Wireless Receiver
- Sprzęt montażowy
- Instrukcja obsługi (ten dokument)
Uwaga: Baterie nie są dołączone do zestawu i należy je zakupić osobno.
Organizować coś
1. Instalacja baterii
- Dla Bezprzewodowy czujnik ruchu: Open the battery compartment and insert one (1) 9V battery. Ensure correct polarity.
- Dla Indoor Wireless Receiver: Open the battery compartment and insert three (3) C batteries. Ensure correct polarity.
- Zamknij dokładnie obie komory baterii.
2. Montaż czujnika
The wireless motion sensor is designed for outdoor use and is weather-proof. It can be mounted on a post or wall using the included mounting hardware. Choose a location that provides an unobstructed view of the area you wish to monitor, such as a driveway or entryway. Ensure the sensor is positioned to detect motion effectively.
3. Umieszczenie odbiornika
The indoor wireless receiver can be placed anywhere inside your house, provided it is within 400 feet of the motion sensor. Consider placing it in a central location where the chime can be easily heard. The receiver can be hung on a wall using the integrated keyhole slots or placed on a flat surface.
Instrukcja obsługi
1. Włączanie
Once batteries are installed in both units, the system is ready for operation. There is no complex pairing process required.
2. Motion Detection and Alert
- The outdoor infrared sensor will detect motion within its 400 ft range.
- Upon detection, the sensor sends a wireless signal to the indoor receiver.
- The receiver will then emit an audible chime to alert you.
3. Regulacja głośności
The receiver typically features a switch to select between high and low volume settings for the chime. Adjust this according to your preference and environment.
Konserwacja
- Wymiana baterii: Replace batteries in both the sensor and receiver as needed. A decrease in range or false alarms can indicate low battery levels.
- Czyszczenie: Wipe the exterior of both units with a soft, damp płótno. Nie używaj ostrych środków chemicznych ani ściernych środków czyszczących.
- Umiejscowienie czujnika: Periodically check the outdoor sensor's position to ensure it remains clear of obstructions and is securely mounted.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| No alert when motion is detected. | Low or dead batteries; sensor out of range; obstruction; faulty unit. | Replace batteries in both units. Ensure receiver is within 400 ft of sensor. Clear any obstructions between units. Test units closer together. |
| Fałszywe alarmy. | Sensor picking up unwanted motion (e.g., animals, moving foliage); low batteries. | Adjust sensor angle or location to avoid non-target motion. Replace batteries. |
| Krótki zasięg wykrywania. | Obstructions; interference; low batteries. | Ensure clear line of sight. Minimize electronic interference. Replace batteries. |
Specyfikacje
| Marka | Bunker Hill Security |
| Numer modelu | 69590 |
| Kolor | Biały |
| Źródło zasilania | Zasilany bateryjnie |
| Waga przedmiotu | 10.2 uncji (0.64 funta) |
| Wymiary produktu | 7 x 2.5 x 5.5 cala |
| Maksymalny zasięg | 400 stóp |
| Typ montażu | Montaż ścienny |
| Wymagania dotyczące baterii | 1x 9V (for sensor), 3x C (for receiver) |
| Temperatura pracy | 40 Degrees Fahrenheit (Note: This seems low, usually a range is given, but using provided data) |
| UPC | 792363930680, 792363624473, 531479622221, 701904035364, 792363695909 |
Gwarancja i wsparcie
Information regarding product warranty and customer support is not available in the provided data. Please refer to the product packaging or contact Bunker Hill Security directly for details on warranty coverage and support options.
For legal disclaimers, please note: Must be 18 or older to purchase this product.