Hatco C-6-208-3-QS Booster Heater Instruction Manual

Produkt ponadview

The Hatco C-6-208-3-QS is a compact electric booster heater designed for commercial food service applications. It features a 6-gallon storage capacity and operates on 208v/60/3-ph power with a 6-kW heating element. The unit is constructed with a stainless steel front panel and a powder-coated silver-gray hammertone body, supported by 6-inch plastic non-adjustable legs. It includes a Castone lined tank for durability and is NSF and cULus certified, indicating compliance with public health and safety standards. This model is manufactured in the USA.

Image: Hatco C-6-208-3-QS Compact Booster Heater. This image displays the compact booster heater from a front-side angle, showcasing its stainless steel front panel, gray hammertone body, and four black non-adjustable legs. A control panel with indicators is visible on the lower front section.

Informacje dotyczące bezpieczeństwa

Always read and understand all safety warnings and instructions before installing, operating, or performing maintenance on this equipment. Failure to follow these instructions may result in property damage, serious injury, or death. This appliance must be installed by qualified personnel in accordance with all applicable national and local electrical and plumbing codes.

• Zagrożenie elektryczne: Przed przystąpieniem do prac serwisowych należy odłączyć zasilanie.
• Gorąca powierzchnia: Surfaces may be hot during and after operation. Use caution.
• Ciśnienie wody: Ensure proper water pressure and connections to prevent leaks.
• Wentylacja: Należy zapewnić odpowiednią wentylację wokół urządzenia.
• Ostrzeżenie dotyczące propozycji 65: Ten produkt może narazić Cię na działanie substancji chemicznych, w tym ołowiu, który jest znany w stanie Kalifornia jako czynnik powodujący raka i wady wrodzone lub inne szkody reprodukcyjne. Aby uzyskać więcej informacji, przejdź do www.P65Warnings.ca.gov.

Konfiguracja i instalacja

Proper installation is crucial for the safe and efficient operation of the booster heater. Refer to the detailed installation instructions provided in the full manual for specific plumbing and electrical connections.

Rozpakowywanie

• Ostrożnie wyjmij urządzenie z opakowania.
• Inspect for any shipping damage. Report damage immediately to the carrier.
• Retain packaging materials for future transport or return if necessary.

Wymagania dotyczące lokalizacji

• Install on a level, stable surface capable of supporting the unit's weight (approximately 118 pounds dry, plus water).
• Ensure adequate clearance for ventilation and servicing.
• Locate near appropriate electrical and water supply connections.

Połączenie elektryczne

This unit requires a 208v/60/3-ph electrical supply. All electrical connections must be made by a qualified electrician in accordance with local and national electrical codes.

• Tomtage: 208 wolty
• Cotage: 6000 watów
• Źródło zasilania: Elektryczny przewodowy

Podłączenie hydrauliczne

Connect the water inlet and outlet lines according to standard plumbing practices. Ensure all connections are watertight.

• Install a shut-off valve on the inlet water line.
• Ensure proper drainage for any overflow or relief valve discharge.

Instrukcja obsługi

Once properly installed and connected, the booster heater is designed for straightforward operation.

1. Napełnij zbiornik: Before applying power, ensure the unit's tank is completely filled with water. Open the water supply valve and allow the tank to fill until water flows from the hot water outlet.
2. Zastosuj moc: Turn on the electrical power supply to the unit. The power indicator light on the control panel should illuminate.
3. Cykl grzewczy: The unit will automatically begin heating the water to the set temperature. A heating indicator light may illuminate during this process.
4. Kontrola temperatury: The booster heater is factory-set to maintain a specific temperature. Adjustments, if available, should only be made by qualified service personnel.
5. Normalna praca: The unit will cycle on and off as needed to maintain the desired water temperature.

For optimal performance, ensure a continuous supply of pre-heated water to the booster heater if it is part of a larger dishwashing system.

Konserwacja

Regular maintenance ensures the longevity and efficient operation of your Hatco booster heater. Always disconnect power before performing any maintenance.

Konserwacja dzienna/tygodniowa

• Czyszczenie zewnętrzne: Przetrzeć powierzchnie zewnętrzne środkiem adamp szmatką i łagodnym detergentem. Nie używaj ściernych środków czyszczących.
• Sprawdź, czy nie ma wycieków: Visually inspect all plumbing connections for any signs of leaks.

Konserwacja miesięczna/kwartalna

• Odwapnianie: Depending on water hardness, the tank and heating elements may require deliming to remove mineral deposits. Consult a qualified service technician for proper deliming procedures.
• Sprawdź połączenia: Check electrical and plumbing connections for tightness and wear.

Roczna konserwacja

• It is recommended to have the unit inspected by a qualified service technician annually to ensure all components are functioning correctly and to address any potential issues.

Rozwiązywanie problemów

This section provides solutions to common issues. For problems not listed here, or if issues persist, contact qualified service personnel.

Specyfikacje

Key technical specifications for the Hatco C-6-208-3-QS Booster Heater:

• Model: C-6-208-3-QS
• Producent: Hatco
• Moc: 208 Volts, 6000 Watts, 3-phase
• Pojemność magazynowa: 6 galony
• Wymiary (dł. x szer. x wys.): Około 20.75 x 13 x 19.75 cala
• Waga przedmiotu: Approximately 118 pounds (dry)
• Tworzywo: Stainless Steel (front panel), Powder-coated silver-gray hammertone (body)
• Nogi: 6-inch plastic non-adjustable
• Tank Lining: Castone
• Certyfikaty: NSF, cULus
• Kraj pochodzenia: Wyprodukowano w USA

Informacje o gwarancji

The Hatco C-6-208-3-QS Booster Heater includes a manufacturer's one-year parts and labor warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official warranty document provided with your product or contact Hatco customer support.

Obsługa klienta

For technical assistance, parts inquiries, or warranty claims, please contact Hatco customer support. When contacting support, please have your model number (C-6-208-3-QS) and serial number ready.

Producent: Hatco

Refer to the official Hatco website or product documentation for the most current contact information.