Broan-NuTone CT700

Broan-NuTone CT700 Deluxe Electric Power Brush Instruction Manual

Model: CT700 | Brand: Broan-NuTone

1. Wprowadzenie

Thank you for choosing the Broan-NuTone CT700 Deluxe Electric Power Brush. This power brush is designed to enhance your central vacuum system, providing deep cleaning action for carpets and floors. It features a motorized roller bar with nylon brushes, adjustable height settings, and built-in LED lights for improved visibility. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new power brush.

Broan-NuTone CT700 Deluxe Electric Power Brush

Figure 1: Broan-NuTone CT700 Deluxe Electric Power Brush

2. Ważne informacje dotyczące bezpieczeństwa

  • Always disconnect the power brush from the central vacuum hose before performing any maintenance or cleaning.
  • Do not use the power brush on wet surfaces or to pick up liquids.
  • Trzymaj włosy, luźne ubrania, palce i inne części ciała z dala od otworów i ruchomych części.
  • Używaj wyłącznie zgodnie z opisem w niniejszej instrukcji. Używaj wyłącznie akcesoriów zalecanych przez producenta.
  • Inspect the power brush and hose for any damage before each use. Do not use if damaged.

3. Konfiguracja

3.1 Attaching the Power Brush to the Wand

The CT700 power brush is designed to connect securely to your central vacuum wand. Ensure the wand is compatible with the power brush's electrical connections.

  1. Align the electrical pins on the power brush's connector with the corresponding slots on your central vacuum wand.
  2. Push the wand firmly into the power brush's connector until it clicks into place. Ensure a secure connection for both mechanical stability and electrical contact.

3.2 Connecting to the Central Vacuum System

Once the power brush is attached to the wand, connect the central vacuum hose to a wall inlet. The power brush will receive power through the hose's electrical connection to the central vacuum unit.

4. Instrukcja obsługi

4.1 Włączanie/wyłączanie

The power brush is activated via the central vacuum system's hose. When the central vacuum is turned on (typically via a switch on the hose handle), the power brush will receive power, and its motorized roller bar will begin to spin.

4.2 świateł LED

The CT700 features built-in, full-width LED lights that illuminate the cleaning path, maximizing visibility and ensuring no dirt or debris is missed, especially in dimly lit areas or under furniture.

Close-up of LED lights on Broan-NuTone CT700 Power Brush

Figure 2: Built-in LED lights for enhanced visibility

4.3 Regulacja wysokości

The power brush offers 4-position height adjustments to optimize cleaning for various carpet types and floor surfaces. This adjustment is typically made using a foot pedal located on the power brush. Press the pedal to cycle through the height settings:

  • Najniższe ustawienie: Ideal for hard floors and low-pile carpets.
  • Ustawienia średnie: Suitable for medium-pile carpets.
  • Najwyższe ustawienie: Recommended for high-pile or shag carpets.
Floor height adjustment indicator on Broan-NuTone CT700 Power Brush

Figure 3: Floor height indicator with multiple settings

4.4 Manewrowość

The power brush features a built-in steering element and non-marking, rubberized coated wheels. This design provides maximum maneuverability, allowing for easy navigation around furniture and along baseboards. The brush release pedal also allows for a low profile, enabling access to hard-to-reach areas like under beds or couches.

Broan-NuTone CT700 Power Brush in use on carpet

Figure 4: Power brush effectively cleaning carpet

4.5 Oficjalny film o produkcie

Wideo 1: W tym filmie przedstawionoview of the Broan-NuTone central vacuum systems and accessories, highlighting features like powerful suction, quiet operation, HEPA filtration, and customizable accessories. It demonstrates the general benefits and design principles of the system, including the power brush.

5. Konserwacja

5.1 Czyszczenie wałka szczotkowego

Periodically inspect the motorized roller bar for tangled hair, strings, or debris. To clean:

  1. Disconnect the power brush from the central vacuum hose.
  2. Turn the power brush upside down.
  3. Carefully cut away any tangled hair or debris from the brush roll using scissors. Be careful not to damage the bristles or the belt.
  4. Upewnij się, że szczotka obrotowa obraca się swobodnie po czyszczeniu.
Underside of Broan-NuTone CT700 Power Brush showing brush roll

Rysunek 5: Spód view of the power brush, showing the brush roll

5.2 Wymiana paska

The motorized brush roll is driven by a belt. If the brush roll stops spinning or makes unusual noises, the belt may need replacement. Refer to the detailed instructions provided with replacement belts or consult a qualified service technician.

6. Zgodność

The Broan-NuTone CT700 Deluxe Electric Power Brush is designed for use with specific Broan-NuTone central vacuum hoses. Compatible hoses include:

  • Broan-NuTone CH520 Hose
  • Broan-NuTone CH515 Hose
  • Broan-NuTone CH615 Hose
  • Broan-NuTone CH620 Hose

Using non-compatible hoses may result in improper function or damage to the power brush or central vacuum system.

7. Specyfikacje

FunkcjaSzczegół
MarkaBroan-NuTone
Nazwa modeluCT700
Numer modeluCT700
KolorCzarny
Źródło zasilaniaAC
Tomtage120 wolty
Hose Length (Brush Width)14 cali
Zalecenia dotyczące powierzchniDywan, twarda podłoga
Funkcja specjalnaWheels, Built-in LED Lights, 4-position Height Adjustment
Waga przedmiotu0.5 kilograma
GTIN/UPC026715193158

8. Rozwiązywanie Problemów

ProblemMożliwa przyczynaRozwiązanie
Szczotka rolkowa się nie obracaTangled debris, worn/broken belt, electrical connection issue.Clean brush roll of debris. Inspect and replace belt if necessary. Check hose and wand connections for secure fit and electrical contact.
Światła LED nie działająElectrical connection issue, faulty lights.Ensure the central vacuum system is powered on and the hose/wand connections are secure. If problem persists, contact support.
Loss of suction at power brushClog in hose or power brush, improper height setting.Check for and clear any clogs. Adjust height setting appropriately for the surface being cleaned.
Power brush 'cuts in and out'Loose electrical connection in hose or wand.Ensure all connections (hose to inlet, wand to hose, power brush to wand) are tight and secure.

9. Gwarancja i wsparcie

Please note that this product is indicated to have no manufacturer's warranty. For any product inquiries, technical assistance, or to purchase replacement parts, please contact Broan-NuTone customer support directly. Refer to the official Broan-NuTone website or your central vacuum system documentation for contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.