Wstęp
This manual provides essential information for the safe and effective use of your VOX AC15C1 1x12 inch 15-watt Guitar Tube Combo Amplifier. Please read these instructions thoroughly before operating the unit to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Rycina 1: Przód view of the VOX AC15C1 Guitar Tube Combo Ampliyfikator.
Organizować coś
1. Rozpakowanie i ustawienie
Ostrożnie usuń amplifier from its packaging. Inspect the unit for any signs of damage. Place the amplifier on a stable, level surface, ensuring adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
2. Podłączenie zasilania
Zapewnij amplifier's power switch is in the OFF position. Connect the supplied power cord to the AC input on the rear panel of the amplifier and then to a grounded AC outlet. Verify that the voltage pasuje do lokalnego źródła zasilania.
3. Podłączenie instrumentu
Connect your guitar to either the 'NORMAL' input jack or the 'TOP BOOST' input jack on the front panel using a standard 1/4-inch instrument cable. The 'TOP BOOST' channel offers additional tone shaping capabilities.
4. Pierwsze uruchomienie
- Ensure all volume controls on the amplifier are set to their minimum (counter-clockwise) position.
- Przełącz przełącznik POWER na pozycję ON. Zaświeci się kontrolka zasilania.
- Wait approximately 30-60 seconds for the tubes to warm up.
- Flip the STANDBY switch to the ON position. The amplifier jest teraz gotowy do użycia.
Rysunek 2: Tył view of the VOX AC15C1 showing power and standby switches, and input jacks.
Obsługa Ampżywsze
The AC15C1 features two main channels: Normal and Top Boost, each with dedicated inputs and volume controls. It also includes built-in Tremolo and Reverb effects.
Panel sterowania nadview
Figure 3: Close-up of the VOX AC15C1 control panel.
- Przycisk zasilania: Obraca ampWŁĄCZANIE lub WYŁĄCZANIE głównego zasilania urządzenia.
- STANDBY Switch: Engages or disengages the amplifier's high voltage. Always use the standby switch when taking short breaks or powering on/off.
- GŁOŚNOŚĆ: Kontroluje ogólną głośność wyjściową ampliyfikator.
- TONE CUT: Adjusts the high-frequency response in the power amp section. Turning it clockwise reduces high frequencies.
- TREMOLO (DEPTH, SPEED): Controls the intensity (Depth) and rate (Speed) of the built-in tremolo effect.
- REVERB (LEVEL): Adjusts the amount of the built-in spring reverb effect.
- TOP BOOST (BASS, TREBLE, VOLUME): Controls the volume and tone (Bass, Treble) for the Top Boost channel.
- NORMAL (VOLUME): Controls the volume for the Normal channel.
- INPUT JACKS (NORMAL, TOP BOOST): Podłącz swój instrument tutaj.
Using the Channels
The AC15C1 offers two distinct channels. The Normalny kanał provides a classic, clean VOX tone. The Top Boost channel offers a brighter, more aggressive sound with independent Bass and Treble controls for detailed tone shaping. Experiment with both channels to find your preferred sound.
Pętla efektów
Ten amplifier includes a by-passable effects loop for integrating external effects pedals. Connect your pedals' output to the 'RETURN' jack and their input to the 'SEND' jack on the rear panel. This allows effects to be applied after the preamp sekcja.
External Speaker Outputs
The AC15C1 provides extension and external speaker outputs. Ensure the impedance of any external speaker cabinet matches the amplifier's output impedance settings (8 or 16 ohms) to prevent damage.
Pomocne filmy
VOX AC15 Quick Tour
Ten film przedstawia szybki przeglądview of the VOX AC15 amplifier's features and controls, demonstrating its basic functionality.
Sound Demos of All Controls on the AC15 and AC30 Amps
Explore the sound capabilities of the AC15 and AC30 amplifiers with detailed demonstrations of each control knob's effect on the tone.
Most Misunderstood Feature of Vox AC15 and AC30 Amps
This video clarifies a common point of confusion regarding the functionality of the AC15 and AC30 amplifiers, enhancing user understanding.
Vox AC15C1X Walkthrough
A detailed walkthrough of the Vox AC15C1X, highlighting its features and operational aspects.
GŁOS Amplifier Up Close + Video Review
An in-depth look at the VOX amplifier, including a close-up examination of its components and a comprehensive review.
Konserwacja
Opieka ogólna
Aby utrzymać swoje amplifier's condition, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Keep the amplifier away from excessive dust, moisture, and extreme temperatures. When transporting, ensure the unit is securely packed to prevent physical damage.
Wymiana rurki
The AC15C1 is a tube amplifier, and its tubes (EL84 power tubes and 12AX7 preamp tubes) will eventually require replacement. If you notice a decrease in sound quality, unusual noise, or a loss of power, the tubes may need to be replaced. It is recommended that tube replacement and biasing be performed by a qualified technician. Incorrect handling of tubes can lead to electric shock or damage to the ampliyfikator.
Rozwiązywanie problemów
If you encounter issues with your AC15C1 amplifier, zapoznaj się z poniższymi typowymi problemami i rozwiązaniami:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brak dźwięku | Power not connected, standby switch off, volume controls at zero, faulty cable, or damaged tubes. | Check power and standby switches. Ensure all volume controls are up. Test with a different instrument cable. Consult a technician for tube inspection. |
| Unwanted noise or rattle | Microphonic tubes, loose components, or external interference. | Gently tap tubes to identify microphonic ones (replace if necessary). Ensure all connections are secure. Move amplifier away from other electronic devices. If persistent, consult a technician. |
| Słaby lub zniekształcony dźwięk | Worn out tubes, incorrect impedance setting for external speaker, or internal component failure. | Consider tube replacement. Verify external speaker impedance. For internal issues, professional service is required. |
Specyfikacje
- Marka: GŁOS
- Nazwa modelu: AC15C1
- Moc wyjściowatage: 15 watów
- Rozmiar głośnika: 12 Inches (Custom Celestion VX10 speaker)
- Amplifier Typ: Rura
- Rury: EL84 power tubes, 12AX7 preamp rurki
- Kanały: Normal, Top Boost
- Ruchomości: Tremolo, pogłos
- Sterownica: Master Volume, Tone Cut, Tremolo Depth, Tremolo Speed, Reverb Level, Top Boost Bass, Top Boost Treble, Top Boost Volume, Normal Volume
- Łączność: 3.5mm Jack, 6.35mm Jack (Instrument Inputs, External Speaker, Extension Speaker, Effects Loop Send/Return)
- Źródło zasilania: Elektryczny przewodowy
- Wymiary przedmiotu (gł. x szer. x wys.): 15.2" gł. x 28.1" szer. x 21.9" wys.
- Waga przedmiotu: 56.1 funtów
- Materiał obudowy: Leather or Vinyl
- Producent: Korg USA Inc.
Gwarancja
The VOX AC15C1 amplifier jest dostarczany z 1-letnia gwarancja covering parts and labor. Please note that tubes and footswitches are covered for a period of 90 dni from the date of purchase. For warranty service, please retain your proof of purchase and contact your authorized VOX dealer or Korg USA Inc. customer support.
Wsparcie
For further assistance, technical support, or service inquiries, please contact your local VOX dealer or visit the official VOX Amplifikacja website. You can also refer to the contact information provided by Korg USA Inc., the manufacturer.
Online resources and FAQs may also be available to help with common questions and operational guidance.