somfy 1810633

Somfy Telis 4 RTS Pure Remote (Model 1810633) Instruction Manual

1. Koniec produktuview

The Somfy Telis 4 RTS Pure Remote is a 5-channel radio remote control designed for operating Somfy RTS motorized window coverings. It enables individual or group control of up to five window coverings or groups of coverings. This remote also features a 'my' button for memorizing and recalling a favorite position. Its ergonomic design and durable rubber edging ensure comfortable and long-lasting use.

Somfy Telis 4 RTS Pure Remote front view
Obraz 1.1: Przód view of the Somfy Telis 4 RTS Pure Remote. This image shows the remote's main control buttons: Up arrow, 'my' button, Down arrow, and the channel indicator lights with the channel selection button at the bottom.

2. Konfiguracja

2.1 Instalacja baterii

The Telis 4 RTS Pure Remote requires one CR2 battery. To install or replace the battery:

  1. Znajdź komorę baterii z tyłu pilota.
  2. Ostrożnie otwórz pokrywę komory.
  3. Włóż jedną baterię CR2, zwracając uwagę na prawidłową biegunowość (+/-).
  4. Dokładnie zamknij pokrywę komory baterii.

2.2 Pairing with RTS Motors

To pair the Telis 4 RTS Pure Remote with your Somfy RTS motor, follow these general steps. Specific procedures may vary depending on your motor model; refer to your motor's instruction manual for precise details.

  1. Ensure the Somfy RTS motor is powered on and in programming mode. This often involves a brief power cycle of the motor (unplugging and replugging), or pressing a program button on an existing remote or directly on the motor.
  2. On the back of the new Telis 4 remote, locate the small program button.
  3. Press and hold the program button on the new remote until the motor jogs (moves slightly up and down). This indicates successful pairing.
  4. Test the remote by pressing the 'Up' or 'Down' buttons to confirm control.
Z powrotem view of Somfy Telis 4 RTS Pure Remote showing program button
Obraz 2.1: Tył view of the Somfy Telis 4 RTS Pure Remote. This image highlights the location of the small program button, typically used for pairing the remote with Somfy RTS motors.

3. Instrukcja obsługi

3.1 Wybór kanału

The Telis 4 RTS Pure Remote can control up to five individual window coverings or groups of coverings. To select a channel:

  • Press the channel selection button (the large round button at the bottom front of the remote) repeatedly.
  • The indicator lights above the button will illuminate to show the currently active channel (1-5).
  • Select the desired channel before sending commands.

3.2 Up/Down Control

Once a channel is selected:

  • Naciśnij Strzałka w górę button to raise the window covering.
  • Naciśnij Strzałka w dół button to lower the window covering.
  • Press either the Up or Down arrow button again to stop the covering at its current position.

3.3 'My' Button Function

The 'my' button serves two primary functions:

  • Funkcja zatrzymania: During movement, press the 'my' button to stop the window covering at its current position.
  • Ulubiona pozycja: If a favorite position has been programmed, press the 'my' button to move the covering to that pre-set position.

To Set a Favorite Position:

  1. Move the window covering to your desired favorite position using the Up or Down arrow buttons.
  2. Naciśnij i przytrzymaj 'my' button until the window covering jogs. This confirms the favorite position has been saved for the selected channel.
Somfy Telis 4 RTS Pure Remote controlling a window shade
Image 3.1: The Somfy Telis 4 RTS Pure Remote in use, sending a signal to a motorized window shade. This illustrates the remote's function in controlling window coverings.

4. Konserwacja

4.1 Wymiana baterii

If the remote's operational range decreases or it becomes unresponsive, the battery may need replacement. Refer to section 2.1 for battery installation instructions.

4.2 Czyszczenie

Clean the remote control with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the remote's electronics or finish.

5. Rozwiązywanie Problemów

  • Pilot nie odpowiada:
    • Check if the battery is correctly installed and has sufficient charge. Try replacing the CR2 battery.
    • Ensure the remote is within the maximum operating range of 65 feet from the Somfy RTS motor.
    • Verify that the correct channel is selected on the remote.
  • Motor not responding to remote commands:
    • Check the power supply to your Somfy RTS motor. Ensure it is receiving power.
    • Attempt to re-pair the remote with the motor following the instructions in section 2.2.
    • If you have multiple remotes, test with another known working remote to isolate the issue.
  • Window covering stops unexpectedly or does not reach limits:
    • This may indicate an issue with the motor's limit settings. Refer to your specific motor's instruction manual for details on adjusting limit settings.
    • Ensure no obstructions are preventing the covering from moving freely.

6. Specyfikacje

FunkcjaSzczegół
MarkaSomfy
Nazwa modeluTelis 4 RTS Pure Remote
Numer modelu1810633
Technologia łącznościRadio Frequency (RTS)
Liczba kanałów5
Typ bateriiBateria 1 x CR2
Maksymalny zasięg65 stóp (20 m)
Funkcja specjalnaErgonomiczna konstrukcja
KolorCzysty

7. Informacje o gwarancji

Warranty information for the Somfy Telis 4 RTS Pure Remote (Model 1810633) is typically provided with your purchase documentation or can be found on the official Somfy website. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the manufacturer's official warranty policy.

8. Wsparcie

Aby uzyskać dalszą pomoc, wsparcie techniczne lub dowiedzieć się o innych produktach Somfy, odwiedź oficjalną stronę internetową Somfy website or contact their customer service department. You can often find helpful resources, FAQs, and contact information on their support pages.

  • Oficjalny Somfy Webstrona: www.somfy.com
  • Obsługa klienta: Odnieś się do webstrona zawierająca regionalne informacje kontaktowe.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.