First Alert CO410

First Alert CO410 Carbon Monoxide Detector Alarm User Manual

Model: CO410 | Brand: First Alert

First Alert logo and Carbon Monoxide Alarms banner

Figure 1: First Alert - Protecting Homes & Families Since 1958.

1. Wprowadzenie

The First Alert CO410 Carbon Monoxide Alarm is designed to detect carbon monoxide (CO) gas, a colorless, odorless, and tasteless gas that can be deadly. This battery-operated unit provides continuous monitoring of CO levels, even during power outages, and features a backlit digital display for easy viewing of current and peak CO concentrations. An 85-decibel alarm sounds when CO levels reach dangerous thresholds. The device includes an EZ access battery door for convenient battery changes and an optional wall mount for flexible placement.

First Alert CO410 Carbon Monoxide Detector with Digital Display

Figure 2: First Alert CO410 Carbon Monoxide Detector with Digital Display.

2. Ważne informacje dotyczące bezpieczeństwa

Carbon monoxide (CO) is a highly toxic gas produced by the incomplete combustion of fuels. It is impossible to detect with human senses. CO alarms are crucial for early warning of CO presence. This device is intended to detect carbon monoxide gas from any source of combustion. It is not designed to detect smoke or fire.

Sources of Carbon Monoxide:

  • Unvented gas or kerosene heaters
  • Leaking chimneys or furnaces
  • Gas ranges, water heaters, clothes dryers
  • Generatory przenośne
  • Fireplaces, wood-burning stoves
  • Automobiles running in an attached garage
Icon of a water heater, representing a source of carbon monoxideIcon of a stove, representing a source of carbon monoxideIcon of a chimney, representing a source of carbon monoxideIcon of a clothes dryer, representing a source of carbon monoxide

Figure 3: Common household sources of carbon monoxide.

Objawy zatrucia tlenkiem węgla:

Symptoms of CO poisoning are often mistaken for the flu and include headache, dizziness, nausea, vomiting, and fatigue. Prolonged exposure can lead to collapse, unconsciousness, and death. If you suspect CO poisoning, seek fresh air immediately and call emergency services.

Wideo 1: Overview of First Alert Carbon Monoxide Alarms and their importance in home safety.

3. Konfiguracja

3.1. Instalacja baterii

  1. Open the EZ access battery door located on the front of the unit.
  2. Włóż dwie (2) baterie AA, zwracając uwagę na prawidłową biegunowość (+ i -).
  3. Dokładnie zamknij komorę baterii.
  4. The unit will perform a self-test and indicate readiness.
First Alert CO410 Carbon Monoxide Detector showing battery compartment

Figure 4: The battery compartment of the CO410, designed for easy access.

3.2. Montaż urządzenia

The CO410 can be placed on a flat surface or wall-mounted. For wall mounting:

  1. Choose an appropriate location (refer to "Placement Guidelines" section).
  2. Za pomocą dołączonych śrub i kotew przymocuj uchwyt montażowy do ściany.
  3. Align the back of the CO410 unit with the mounting bracket and twist clockwise until it locks into place.
Back of First Alert CO410 Carbon Monoxide Detector showing mounting holes

Rysunek 5: Tył view of the CO410, illustrating the mounting holes for wall installation.

4. Instrukcja obsługi

4.1. Cyfrowy wyświetlacz

The backlit digital display shows the current carbon monoxide concentration in parts per million (PPM). In normal operation, it may show "0 PPM" or a low background level. The display will illuminate when a button is pressed or during an alarm event.

4.2. Przycisk testu/wyciszenia

Naciśnij i przytrzymaj TEST/CISZA button to test the alarm's functionality. The alarm will sound a loud 85-decibel horn, and the display will show a test pattern. Release the button to stop the test. This button can also silence a non-threatening alarm or a low battery warning chirp.

4.3. Peak Level Memory

Naciśnij POZIOM SZCZYTOWY przycisk do view the highest CO concentration detected by the alarm since its last reset or power-up. This feature is useful for monitoring potential intermittent CO issues. The peak level will be displayed in PPM.

5. Konserwacja

5.1. Regularne testy

Test your CO alarm weekly by pressing the TEST/CISZA button. This ensures the unit is functioning correctly. If the alarm does not sound during the test, replace the unit immediately.

A person pressing the test button on a carbon monoxide alarm

Figure 6: Regularly testing your carbon monoxide alarm is essential for safety.

5.2. Wymiana baterii

The CO410 uses two (2) AA batteries. When the batteries are low, the unit will chirp periodically and display a low battery indicator. Replace batteries promptly to ensure continuous protection. Use only recommended alkaline batteries.

5.3. End-of-Life Warning

The CO410 has a 7-year limited warranty and is designed to last approximately 7 years. After this period, the unit will emit an end-of-life signal chirp, indicating it's time to replace the entire alarm for continued safety.

A person replacing a carbon monoxide alarm on a wall

Figure 7: Replace carbon monoxide alarms at least every 7 years.

6. Wytyczne dotyczące rozmieszczenia

For optimal protection, install carbon monoxide alarms on every level of your home and in each sleeping area. Consider placing additional alarms near potential CO sources like furnaces, water heaters, and attached garages.

Diagram showing recommended placement of CO alarms in a multi-story house

Figure 8: Recommended placement of CO alarms on each level and in bedrooms.

A carbon monoxide alarm mounted on a wall in a hallway

Figure 9: Install alarms on every level and in every bedroom for comprehensive coverage.

7. What to Do in Case of an Alarm

If the carbon monoxide alarm sounds:

  1. Natychmiast wyjdź na świeże powietrze lub otwórz wszystkie drzwi i okna.
  2. Przeprowadź liczenie osób, aby upewnić się, że wszystkie zostały policzone.
  3. Do not re-enter the premises until the building has been aired out and the alarm remains in its normal condition.
  4. Zadzwoń do służb ratunkowych (Straż Pożarna lub 911).
  5. Call a qualified appliance technician to investigate the source of CO from fuel-burning equipment and appliances, and inspect for proper operation of this equipment.

8. Rozwiązywanie Problemów

  • Alarm wydaje dźwięki okresowo: This usually indicates a low battery. Replace the batteries immediately.
  • Alarm Does Not Sound During Test: Ensure batteries are correctly installed and fresh. If the issue persists, the unit may be faulty and requires replacement.
  • Błędne odczyty: Ensure the alarm is not placed near vents, windows, or in areas with high humidity or extreme temperatures, which can affect sensor performance.
  • Alarm Sounds Without Apparent CO: Evacuate the premises and call emergency services. Even low levels of CO can be dangerous.

9. Specyfikacje

MarkaPierwszy alert
ModelCO410
Źródło zasilaniaZasilanie bateryjne (wymagane 2 baterie AA)
Typ czujnikaElektrochemiczny
Typ alarmuTlenek węgla
Głośność alarmu85 decybeli
Wymiary produktu1.5" gł. x 5" szer. x 3.4" wys.
Waga przedmiotu8.3 uncji (236 grama)
CertyfikatyPosiada certyfikat UL
First Alert CO410 Carbon Monoxide Detector with dimensions labeled

Figure 10: Dimensions of the First Alert CO410 Carbon Monoxide Detector.

10. Gwarancja i pomoc techniczna

The First Alert CO410 Carbon Monoxide Detector Alarm comes with a 7-year limited warranty. For warranty claims or technical support, please refer to the contact information provided in the packaging or visit the official First Alert webstrona.

© 2023 First Alert. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.