SEIKO Global Radio Wave Digital Alarm Clock

Wstęp

This manual provides detailed instructions for the proper use and maintenance of your SEIKO Global Radio Wave Digital Alarm Clock, model SQ648S. This compact alarm clock is designed for convenience, especially during travel, featuring global radio wave reception, an alarm, calendar, and temperature display.

Please read this manual thoroughly before using the product to ensure correct operation and to maximize its lifespan.

Główne cechy

• Global Radio Wave Reception: Automatically corrects time by receiving signals from Japan (40kHz/60kHz), USA, Germany, and the UK.
• Alarm elektroniczny: Features a gradual tone alarm with 4 volume levels.
• Funkcja drzemki: Umożliwia tymczasowe zawieszenie alarmu.
• W pełni automatyczny kalendarz: Displays date and day of the week automatically.
• Wyświetlacz temperatury: Shows ambient temperature (accuracy ±2°C).
• Wyświetlacz 12/24-godzinny: Switch between 12-hour and 24-hour time formats.
• Wskaźnik niskiego poziomu baterii: Powiadamia o konieczności wymiany baterii.
• Kompaktowa i przenośna konstrukcja: Ideal for travel and business trips.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

• SEIKO Global Radio Wave Digital Alarm Clock (Model SQ648S)
• Baterie alkaliczne AAA (x2)
• Instruction Manual (this document) with Warranty Information

Organizować coś

1. Instalowanie baterii

1. Otwórz pokrywę komory baterii znajdującą się z tyłu zegara.
2. Włóż dwie (2) baterie alkaliczne AAA, zwracając uwagę na prawidłową biegunowość (+/-).
3. Dokładnie zamknij pokrywę komory baterii.

Rycina 1: Przód view of the SEIKO SQ648S clock. The main display shows the time, and the radio wave reception icon is visible.

2. Initial Time Setting and Radio Wave Reception

Upon battery installation, the clock will automatically attempt to receive a radio time signal. This process may take several minutes.

• Aby zapewnić optymalny odbiór sygnału, ustaw zegar w pobliżu okna.
• The radio wave icon on the display will indicate signal strength. A solid icon means successful reception.
• If reception is unsuccessful, the time can be set manually (refer to the "Manual Time Setting" section in Operating Instructions).

Rysunek 2: Szczegółowy view of the digital display, showing time, date, temperature, and the radio wave reception indicator.

Instrukcja obsługi

Time Display Modes (12/24 Hour)

Press the "12/24H" button to switch between 12-hour (with AM/PM indicator) and 24-hour formats.

Ustawianie alarmu

1. Press the "ALARM SET" button. The alarm time will flash.
2. Use the "HOUR" and "MINUTE" buttons to adjust the desired alarm time.
3. Press "ALARM SET" again to confirm.
4. To activate/deactivate the alarm, slide the "ALARM ON/OFF" switch. An alarm icon will appear on the display when active.

Funkcja drzemki

When the alarm sounds, press the "SNOOZE/LIGHT" button to temporarily stop the alarm. The alarm will sound again after approximately 5 minutes.

Podświetlenie wyświetlacza

Press the "SNOOZE/LIGHT" button to illuminate the display for a few seconds.

Temperature and Date Display

The clock automatically displays the temperature and date. You can switch between displaying temperature or day of the week by pressing the "TEMP/DAY" button.

Manual Time Setting (If radio reception fails)

1. Press and hold the "SET" button until the time starts flashing.
2. Use the "HOUR" and "MINUTE" buttons to adjust the time.
3. Press "SET" to move to the next setting (Year, Month, Day). Adjust using "HOUR" and "MINUTE".
4. Continue pressing "SET" to cycle through all settings and exit manual setting mode.

Notatka: Manual time setting will be overwritten if the clock successfully receives a radio wave signal later.

Time Zone Adjustment (for Global Travel)

This clock supports time zone adjustment for different regions. Refer to the detailed instructions in the full manual for specific time zone settings for Japan, USA, Germany, and UK radio wave reception areas.

Konserwacja

Czyszczenie

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing i wyświetlacz.

Wymiana baterii

When the low battery indicator appears on the display, replace both AAA alkaline batteries promptly. Old batteries should be disposed of according to local regulations.

Ostrożność: Nie mieszaj starych i nowych baterii ani różnych typów baterii.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

Informacje o gwarancji

This product comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.

Obsługa klienta

For further assistance, technical support, or inquiries regarding your SEIKO Global Radio Wave Digital Alarm Clock, please contact SEIKO customer service. Contact details can typically be found on the official SEIKO webmiejscu lub na karcie gwarancyjnej.

You may also visit the official Seiko webstrona z odpowiedziami na często zadawane pytania i dodatkowymi zasobami: www.seikoclocks.com