1. Wprowadzenie
This manual provides essential instructions for the installation, maintenance, and proper use of your Wahl Professional 2-Hole Standard Clipper Blade, Model 1006. Designed for professional precision, this replacement blade ensures accurate and sharp performance for various Wahl clippers. Please read this manual thoroughly before use to ensure optimal performance and longevity of your blade.
Image 1: Wahl Professional 2-Hole Standard Clipper Blade, Model 1006.
2. Zgodność
The Wahl Professional 2-Hole Standard Clipper Blade (Model 1006) is compatible with the following Wahl clipper models:
- Wahl Super Taper
- Wahl Super Taper II
- Wahl Icon
- Wahl Pro Basic
- Wahl Sterling 9
Image 2: Various Wahl clipper models compatible with the 2-Hole Standard Clipper Blade.
3. Zawartość opakowania
Your Wahl Professional 2-Hole Standard Clipper Blade package includes:
- 1mm-3mm Standard Clipper Blade
- Olej do ostrzy
- Śruby montażowe
- Instrukcja instalacji (niniejsza instrukcja)
4. Montaż ostrza
Follow these steps to properly install your new clipper blade:
- Wyłączone: Ensure your clipper is turned off and unplugged from the power source before beginning installation.
- Usuń stare ostrze: Using a screwdriver, carefully loosen and remove the two screws holding the old blade assembly to the clipper housing. Set aside the old blade and screws.
- Czysty Clipper: Clean any hair or debris from the clipper's blade area using a brush.
- Pozycja nowego ostrza: Place the new Wahl Professional 2-Hole Standard Clipper Blade onto the clipper, aligning the holes in the blade with the screw holes on the clipper. Ensure the small moving blade is correctly seated on the drive lever.
- Bezpieczne ostrze: Insert the screws and tighten them just enough to hold the blade in place, allowing for slight adjustment.
- Wyrównanie ostrzy: Adjust the blade to ensure the top blade (cutter) is perfectly aligned with the bottom blade (comb), with the teeth of the top blade slightly behind the teeth of the bottom blade. This prevents cutting the skin.
- Ostateczne dokręcanie: Once aligned, firmly tighten both screws. Do not overtighten.
- Smarować: Apply a few drops of Wahl clipper oil to the teeth of the new blade.
Rysunek 3: Szczegółowy view of the 2-Hole Standard Clipper Blade, highlighting its design and dimensions.
5. Konserwacja
Proper maintenance is crucial for extending the life and performance of your clipper blade.
5.1 Smarowanie ostrzy
Regular oiling reduces friction, prevents rusting, and ensures smooth cutting performance. Wahl's high-carbon blades benefit significantly from consistent lubrication.
- Nałóż olej: With the clipper turned off, apply a drop of Wahl clipper oil to each corner of the top blade and one drop to the foot of the blade.
- Distribute Oil: Turn the clipper on for a few seconds to allow the oil to work its way into the blades.
- Wytrzyj nadmiar: Nadmiar oleju zetrzeć czystą szmatką.
It is recommended to oil your blades before or after each use, especially if the clipper feels sluggish or pulls hair.
Video 1: Demonstrates how to oil clipper blades to prevent pulling and ensure smooth operation.
5.2 Czyszczenie ostrzy
After each use, brush off any loose hair from the blades. For a deeper clean, especially after prolonged use or if hair buildup is noticeable:
- Szczotkowanie włosów: Use a small cleaning brush to remove hair from between the blade teeth.
- Dezynfekcja (opcjonalnie): For professional use, consider using a clipper disinfectant spray (e.g., Wahl Clini-Clip Spray) to sanitize the blades. Follow the product's instructions.
- Re-oil: Always re-oil the blades after cleaning or disinfecting to prevent rust and maintain lubrication.
Image 4: Essential maintenance products for Wahl clippers, including blade oil and disinfectant spray.
6. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Maszynka do strzyżenia ciągnie lub wyrywa włosy | Ostrza są tępe, brudne lub nieprawidłowo naoliwione. | Clean and oil the blades. If the problem persists, the blades may need sharpening or replacement. |
| Blades are rusting | Insufficient oiling or exposure to moisture. | Ensure blades are thoroughly dried after cleaning and regularly oiled, especially in humid environments. |
| Ostrze nie tnie skutecznie | Improper blade alignment or worn blades. | Check blade alignment as per installation instructions. If blades are old, consider replacing them. |
7. Specyfikacje
- Nazwa produktu: 2-Hole Standard Clipper Blade
- Numer modelu: 1006
- Marka: Wahl Profesjonalny
- Długość cięcia: 1mm-3mm (Standard)
- Tworzywo: Stal wysokowęglowa
- Wymiary: 2 x 0.1 x 3 cala
- Waga przedmiotu: 0.8 uncji
- Kod UPC: 785085010068, 043917100609
- Producent: Wahl Profesjonalny
- Pochodzenie: Wyprodukowano w USA
8. Gwarancja i pomoc techniczna
For warranty information, product support, or to purchase additional accessories, please visit the official Wahl Professional webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Zachowaj paragon jako dowód zakupu na wypadek roszczeń gwarancyjnych.
Wahl Profesjonalny Webstrona: www.wahlpro.com