BIG RED T92003B

BIG RED T92003B Torin Hydraulic Welded Bottle Jack Instruction Manual

Model: T92003B

Wstęp

This manual provides essential instructions for the safe and effective use of your BIG RED T92003B Torin Hydraulic Welded Bottle Jack. This hydraulic bottle jack is designed for residential and commercial lifting applications, offering a 20-ton (40,000 lb) capacity. It features a robust welded construction, a high-quality glide-action pressure pump, and integrated safety mechanisms. Please read this manual thoroughly before operation to ensure proper usage and to prevent injury or damage.

Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Failure to heed these warnings may result in personal injury and/or property damage. Always prioritize safety when operating hydraulic lifting equipment.

  • Przeczytaj i zrozum: Before operating, thoroughly read and understand all instructions and warnings provided in this manual and on the product labels.
  • Pojemność znamionowa: Never exceed the rated capacity of 20 tons (40,000 lbs). Overloading can cause jack failure and severe injury.
  • Stabilna powierzchnia: Podnośnik należy zawsze ustawiać na twardej, równej powierzchni, która wytrzyma obciążenie.
  • Support the Load: After lifting, immediately support the vehicle or load with appropriate jack stands. Never work under a load supported only by the jack.
  • Prawidłowe rozmieszczenie: Position the jack saddle only on the vehicle or load's lifting points as specified by the manufacturer.
  • Luz: Ensure adequate clearance for lifting and lowering operations. Keep hands and feet clear of moving parts.
  • Personel: Do not get under or allow anyone under the vehicle until it has been properly supported by jack stands.
  • Sprawdź przed użyciem: Always inspect the jack for damage or leaks prior to each use. Do not use if damaged or leaking.
  • Przeznaczenie: This jack is designed for lifting vehicles, farm equipment, heavy-duty machinery, and industrial equipment. Do not use it for any other purpose.
  • Ostrzeżenie dotyczące propozycji 65: Ten produkt może narazić Cię na działanie substancji chemicznych, o których stan Kalifornia wie, że powodują raka, wady wrodzone lub inne uszkodzenia układu rozrodczego. Aby uzyskać więcej informacji, odwiedź stronę www.P65Warnings.ca.gov.
BIG RED T92003B Torin Hydraulic Welded Bottle Jack with warning label
Figure 1: BIG RED T92003B Torin Hydraulic Welded Bottle Jack. Note the warning label on the side of the jack, emphasizing safety precautions.

Organizować coś

  1. Rozpakowanie i kontrola: Carefully remove the jack from its packaging. Inspect for any visible damage or signs of hydraulic fluid leakage. Do not use if damaged.
  2. Odpowietrzanie układu hydraulicznego: Before first use, or if the jack has been stored horizontally, it may be necessary to bleed air from the hydraulic system. To do this:
    • Open the release valve by turning it counter-clockwise approximately one full turn.
    • Wykręć korek wlewu oleju.
    • Pump the handle several times to purge air.
    • Replace the oil filler plug and close the release valve by turning it clockwise until snug.
  3. Zespół uchwytu: Insert the two-piece handle into the handle socket on the jack. Ensure it is securely seated.

Instrukcja obsługi

Lifting a Load

  1. Ensure the load is stable and on a firm, level surface. Chock any wheels that will remain on the ground.
  2. Position the jack directly under the designated lifting point of the load. The saddle should be centered and make full contact.
  3. Close the release valve firmly by turning the handle clockwise until it is snug. Do not overtighten.
  4. Pump the handle up and down to raise the jack. The glide-action pressure pump is designed for minimal effort.
  5. Raise the load to the desired height. Do not exceed the maximum lifting height or the jack's capacity.
  6. Immediately place appropriately rated jack stands under the load at its designated support points.
  7. Powoli otwórz zawór spustowy, aby opuścić ładunek na podstawki podnośnikowe.

Opuszczanie ładunku

  1. Upewnij się, że w obszarze wokół ładunku nie ma żadnych ludzi ani przeszkód.
  2. If the load is on jack stands, slightly raise the load with the jack to remove pressure from the stands, then remove the jack stands.
  3. Slowly turn the release valve counter-clockwise to lower the load. Control the descent rate by adjusting how much the valve is opened.
  4. Po całkowitym opuszczeniu ładunku należy zdjąć podnośnik.
Close-up images of the bottle jack showing safety bypass valve, adjustable screw top, and leak-free welded cylinder
Figure 2: Key features of the bottle jack, including the safety bypass valve, adjustable screw top for varied lifting heights, and the leak-free welded cylinder design.

Konserwacja

  • Olej hydrauliczny: The jack uses high-quality hydraulic oil for optimal performance. This oil offers corrosion resistance and maintains flexibility across a wide temperature range (40°F to 105°F). Check the oil level periodically and refill if necessary using only recommended hydraulic jack oil.
  • Czyszczenie: Utrzymuj podnośnik w czystości, bez brudu, smaru i zanieczyszczeń. Po każdym użyciu wytrzyj siłownik i mechanizm pompy.
  • Smarowanie: Periodically lubricate moving parts with light machine oil.
  • Składowanie: Przechowuj podnośnik w suchym, chronionym miejscu z całkowicie schowanym siłownikiem, aby zapobiec korozji i przedłużyć żywotność uszczelnienia.
  • Kontrola: Regularly inspect the jack for any signs of wear, damage, or leaks. Pay close attention to the piston ram and seals. The Y-style polyurethane sealing ring with a backup ring is designed to prevent slow load descent, but wear can occur over time.
Graphic illustrating special hydraulic oil properties and operating temperature range
Figure 3: Illustration of the special hydraulic oil's properties, including thermal stability, abrasion resistance, and biodegradability, along with its operating temperature range.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Jack does not lift load or lifts slowly.Air in hydraulic system; Low oil level; Release valve not fully closed; Damaged seals.Bleed the hydraulic system (see Setup); Check and refill oil; Ensure release valve is fully closed; Contact service for seal replacement.
Load descends slowly or rapidly.Release valve not properly adjusted; Internal leak; Damaged seals.Adjust release valve carefully; Contact service for inspection and repair.
Wyciek oleju.Loose fittings; Damaged seals; Over-loosened release valve.Tighten fittings; Contact service for seal replacement; Ensure release valve is only opened enough to lower the load, do not unscrew excessively.
Jack handle does not pump.Low oil level; Air in system; Pump mechanism issue.Check and refill oil; Bleed the system; Contact service.

Specyfikacje

  • Model: T92003B
  • Nośność: 20 ton (11 023 funtów)
  • Minimalna wysokość podnoszenia: 9.44 cali
  • Maksymalna wysokość podnoszenia: 17.75 cali
  • Wymiary przedmiotu (dł. x szer. x wys.): 5.98 x 4.88 x 9.44 cala
  • Waga przedmiotu: 18 funta
  • Kolor: Czerwony
  • Producent: Torin Shop Equipment
  • Kod UPC: 615268920030
  • Normy bezpieczeństwa: Meets ASME PASE safety standards
Diagram showing the minimum and maximum height of the bottle jack
Figure 4: Dimensional diagram illustrating the minimum height (9.44 inches) and maximum height (17.63 inches) of the bottle jack, including the screw top extension.
Comparison table of different BIG RED bottle jack models and their specifications
Figure 5: A comparison table detailing specifications across various BIG RED bottle jack models, including capacity, weight, and height ranges.

Gwarancja i wsparcie

This BIG RED T92003B Torin Hydraulic Welded Bottle Jack includes a limited 1-year manufacturer warranty. For warranty claims, technical support, or replacement parts, please contact Torin Shop Equipment directly. Refer to the product packaging or the manufacturer's official webAktualne dane kontaktowe znajdują się na stronie.