Altec Lansing 120

Altec Lansing 120 Satellite Speaker System Instruction Manual

Wstęp

The Altec Lansing 120 is a two-satellite speaker system designed to enhance the audio experience for various devices. This system provides clear sound for personal computers, video gaming systems, portable CD players, MP3 players, and other audio sources. Its compact design and simple connectivity make it a versatile audio solution.

Główne cechy obejmują:

  • 2 Watts total Continuous Power output.
  • Compatibility with multiple audio sources including PCs, gaming systems, portable CD players, and MP3 players.
  • Integrated Power On/Off and Master Volume controls for easy operation.
  • Convenient Headphone Jack for private listening.
  • Shielded Satellites to prevent interference with other electronic devices.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

  • Two (2) Altec Lansing 120 Satellite Speakers
  • One (1) Audio Input Cable (3.5mm stereo jack)
  • Jeden (1) zasilacz sieciowy

Instrukcje konfiguracji

Follow these steps to set up your Altec Lansing 120 speaker system:

  1. Rozmieszczenie głośników: Place the two satellite speakers on a stable, flat surface, ideally on either side of your listening area (e.g., computer monitor, TV) for optimal stereo sound. Ensure they are positioned to direct sound towards you.
  2. Podłącz do zasilania: Plug the AC power adapter into the designated power input port on one of the satellite speakers. Then, plug the other end of the power adapter into a standard wall electrical outlet.
  3. Połącz ze źródłem dźwięku: Locate the 3.5mm audio input jack on the back of the primary satellite speaker. Connect one end of the supplied audio input cable to this jack. Connect the other end of the audio cable to the audio output jack (typically green) on your PC, gaming console, portable CD player, or MP3 player.
Altec Lansing 120 Satellite Speakers connected to a device

Image: The Altec Lansing 120 satellite speakers, showing their compact design and typical setup next to a computer monitor. The image illustrates the two speakers with their cables connected, ready for use.

Instrukcja obsługi

Once the speakers are set up, follow these steps for operation:

  • Włączanie/wyłączanie: Locate the integrated power control (often combined with the volume knob) on the primary satellite speaker. Turn the knob clockwise to power on the speakers. Turn it counter-clockwise until it clicks to power off.
  • Regulacja głośności: Rotate the master volume control knob on the primary satellite speaker to increase or decrease the sound level. It is recommended to start with a low volume and gradually increase it to a comfortable listening level. Also, ensure the volume on your audio source device (PC, MP3 player, etc.) is adequately adjusted.
  • Korzystanie z gniazda słuchawkowego: For private listening, plug your headphones into the headphone jack located on the primary satellite speaker. Plugging in headphones will automatically mute the speaker output. Unplugging the headphones will restore sound through the speakers.

Konserwacja

To ensure the longevity and optimal performance of your Altec Lansing 120 speaker system, follow these maintenance guidelines:

  • Czyszczenie: Use a soft, dry cloth to clean the exterior of the speakers. Avoid using liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
  • Wentylacja: Ensure that the speakers are placed in an area with adequate ventilation. Do not block any vents or openings on the speaker enclosures.
  • Składowanie: If storing the speakers for an extended period, disconnect them from power and audio sources. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
  • Pielęgnacja kabli: Avoid sharply bending or crimping the power and audio cables. Regularly check cables for any signs of wear or damage.

Rozwiązywanie problemów

Jeśli masz problemy z systemem głośników, zapoznaj się z poniższymi typowymi problemami i ich rozwiązaniami:

ProblemMożliwa przyczynaRozwiązanie
Brak dźwięku z głośników
  • Głośniki nie są włączone.
  • Volume too low on speakers or audio source.
  • Kabel audio nie jest prawidłowo podłączony.
  • Słuchawki są podłączone.
  • Sprawdź, czy głośniki są włączone.
  • Increase volume on both speakers and audio source.
  • Sprawdź wszystkie połączenia kabli audio.
  • Unplug headphones from the jack.
Zniekształcony lub niewyraźny dźwięk
  • Zbyt duża głośność.
  • Słaba jakość źródła dźwięku.
  • Luźne połączenia kablowe.
  • Lower the volume on speakers and/or audio source.
  • Wypróbuj inne źródło dźwięku lub file.
  • Upewnij się, że wszystkie kable są bezpiecznie podłączone.
Działa tylko jeden głośnik
  • Loose connection to the non-working speaker.
  • Uszkodzony kabel audio.
  • Check the connection of the non-working speaker to the primary speaker.
  • Jeśli to możliwe, spróbuj użyć innego kabla audio.

Specyfikacje

Technical details for the Altec Lansing 120 Satellite Speaker System:

FunkcjaSzczegół
MarkaAltec Lansing
Numer modelu120
Typ głośnikaSatelita
Technologia łącznościPrzewodowy
Typ montażuWolnostojący, do montażu wtykowego
Źródło zasilaniaElektryczny przewodowy
Metoda kontroliRemote (Note: Refers to integrated controls, not a separate remote unit)
KolorCzarny
UPC021986940029

Gwarancja i wsparcie

For detailed warranty information, product registration, and technical support, please visit the official Altec Lansing webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Zachowaj paragon jako dowód zakupu na wypadek ewentualnych roszczeń gwarancyjnych.

Uwaga: Szczegółowe warunki gwarancji mogą się różnić w zależności od regionu i sprzedawcy.

© 2024 Altec Lansing. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.